Grundlegende Informationen.
Blitzschutz
Mit Blitzschutz
Bescheinigung
ISO, RoHS, CE
Installation Type
Indoor, Small Size
Technic Advantage
Alc&Agc
Advantage
Automatic and Manual Control Gain
Spurious Emission &
GSM Meet Etsi Ts 151 026 V6.1.0
Power Supply
Input AC90~264V, Output DC12V / 3A
WCDMA
Meet 3gpp Ts 25.143 ( V 6.2.0 )
CDMA
Meet Is95 & CDMA2000
Spezifikation
CE ROHS ISO, ETSI
Produktbeschreibung
We are an GB/T19001-2008 /ISO 9001:2008 certificated factory with over 10 years' experience in design and manufacture signal booster Products with CE Certification.
If any new inquiry about signal booster, welcome here and I will try my best to satisfy you well with competitive prices as per your request.
Pls feel free to contact me if you need any support.
Output power is related with the coverage area. Theoretically speaking, in the standard situation (input --60dBm, surrounding no obstacle and proper install):
10dBm can cover 100-200 square meter,
15dBm can cover 200-500 square meter,
20dBm can cover 800-1200square meter,
23dBm can cover 1200-1500square meter,
25dBm can cover 1500-1800square meters.
27dBm can cover 1800-2000square meter,
30dBm can cover 3000-5000square meters.
33dBm can cover 5000-10000square meters.
Features:
1. Elegant and Compact design
2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3. 31dB MGC(Manual gain control) 1dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.
5. Low power consumption.
6.Fast leading time: 1-5working days after payment
1.1. Features
1. Streamline shape.
2. Wide band repeater to support signals of all operators.
3. High-integration (One board to contain low-noise amplifier, frequency selection module, power amplifier module, both uplink and downlink one for all).
4. Manual gain control provides a variety of applications.
5. Auto automatic gain control to stabilize the coverage and minimize the noises.
Auto shut off function as final step to avoid severe interference with mobile network (not available for some models).
Application:
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop. Etc.
Model Number | GCPR-GW20 |
Electrical specification | Uplink | Downlink |
Frequency Range | GSM | 890-915Mhz | 935-960Mhz |
WCDMA | 1920 ~ 1980 MHz | 2110 ~ 2170 MHz |
Max .Gain | ≥ 65dB | ≥ 70dB |
Max .Output Power | ≥ 15dBm | ≥ 20dBm |
Band width (-3dB) | Wide Band |
MGC ( Step Attenuation ) | ≥ 31dB / 1dB step |
Automatic Level Control | ≥ 15dB,auto shut off 31dB after 15dB |
Gain Flatness | ≤6dB(P-P) |
Noise Figure | ≤6dB |
VSWR | ≤1.8 |
Group Delay | ≤5μs |
Frequency stability | ≤0.01ppm |
Spurious Emission & Output inter-modulation | GSM Meet ETSI TS 151 026 V6.1.0 |
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 ) |
CDMA Meet IS95 & CDMA2000 |
LED Alarm | Standard |
Power LED | Green light when power on. |
ALC LED | Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB, LED off after 5 second red color |
Mechanical Specifications | Standard |
I /O Port | N-Female |
Impedance | 50 ohm |
Operating Temperature | -25ºC~+55ºC |
Environment Conditions | IP40 |
Dimensions | 250x220x52mm |
Weight | ≤ 3.5Kg |
Power Supply | Input AC90~264V,output DC12V / 3A |
Our fullband repeater (including 10dBm, 13dBm, 15dBm, 20dBm, 23dBm, 27dBm, 30dBm, 33dBm) is the perfect solution for providing a wireless improvement in the cellular reception of a home, office, restaurant, VIP Room, apartment, building or shopping mall, in the quickest time possibly. One repeater covers 50 to 4000 square meters.
This repeater has Manual Gain Control (MGC) feature that enables engineers to reduce the gain of the repeater
manually if oscillation is detected or too strong input power level during installation, which will help to get the best coverage effect without any interference back to mobile network.
And in order to maintain safe and specific output signal levels, this repeater has built-in signal oscillation detection circuit to adjust the gain automatically so as to avoid interference to the cellular network, also it gets color changing LED's indicating its environmental status: the Alarm LED's located on the front of the unit will change color from green to orange or red, (depending on the input power level) if the system detects signal oscillation in either band or, if the input signal is beyond a safe limit.
Our repeaters also feature a Network Safe / MUTE feature that automatically shuts off the repeater to protect the cellular network if no adjustments are made to eliminate alarm readings on the repeater's LED's. You will want to make sure the LED's remain green at all times for optimum system performance. (This function is not available for some specific models for which we will specify when you purchase)
Below diagram shows how simple and fast repeater system(including 10dBm, 13dBm, 15dBm, 20dBm, 23dBm, 27dBm, 30dBm, 33dBm) is installed and works effectively
One Yagi antenna, as donor antenna, is installed at the top of the roof to pick up good mobile signals from outside, and send through 5D-FB or 3D-FB cable to repeater to amplify the signals significantly, then the output signals are divided into two signals by 2-way splitter, sent to two indoor omni antennas and finally transmitted into area. Very clear phone call or high speed mobile data are immediately achieved within the area.
Standard Package:
1) Power supply adapter 1 unit
2) AC power plug (USA/EU/Swiss/UK/SA/China standard etc) 1unit
3) Installation kit 1unit
4) User manual 1unit
Recommended Accessories:
1)Donor(outdoor) antenna:Patch Antenna(8.5dBi 806-960/1710-2700MHz)
2)Service(indoor) antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3)2*10m of 50Ω-5 coaxial cable with 2 connecters.Or 2*15m of 50Ω-5 coaxial cable with 2 connecters.
Industrial type band selective repeater features:
1, Out band rejection/Out of band gain meets ETSI standard.
2, Use IF SAW filters, high precision for selected band.
3, High power, high gain, low noise figure.
4, Use AGC technology, also with digital attenuator, maximum 31dB in step of 1dB, large range of
adjusting, with manual gain control attenuation switch code.
5, Suitable for the clients who are strict in out band rejection performance. Such as the operators who
need to coverage their own frequency system, and the frequency division in their country or area is
very close and have very little blank space during each operators.
Residential type band selective repeater features:
1. Out band rejection/Out of band gain without ETSI standard.
2. High power, high gain, low noise figure
3. Use AGC technology
4. Use RF SAW filters, due to the filter technique of production limited, the selected band is not as
good precision as classic.
5. Suitable for the clients who don't have very strict requirement with out band rejection, Such as the
engineering or operators who need to coverage residential or public system, and the frequency
division blank space in their country is big enough during each operators.
Die Anschrift:
86#, Hou Ting, Number Two Industrial District, Sha Jing, Bao an District, Shenzhen, Guangdong, China
Unternehmensart:
Hersteller/Werk
Geschäftsbereich:
Elektronik
Zertifizierung des Managementsystems:
ISO 9001
Firmenvorstellung:
Gainer International (China) Limited ist ein professionelles Unternehmen, das auf drahtlose Kommunikationsprodukte, Kundenelektronikprodukte spezialisiert ist. Wir sind hoch entwickelnden Unternehmen, mit CE-Zertifikat und GB/T19001-2008 /ISO 9001: 2008. Wir scheuen keine Mühe, gute Produkte und Service für Kunden auf der ganzen Welt zu bieten.
Wir produzieren hauptsächlich Signalverstärker, Verstärker von GSM, CDMA, DCS, WCDMA, IDEN, LTE CDMA450M, auch andere korrelative Produkte. Wir fertigen Produkte durch unser eigenes F&E-Team, das durch erfahrene Exporte in verwandte Bereiche gebildet wurde. Unsere Konstruktion und Fertigung kann den speziellen Anforderungen unserer Kunden entsprechen.
Wir widmen uns der Bereitstellung der zufriedenstellenden Dienstleistungen für unsere Kunden. Wir streben danach, wettbewerbsfähigere Produkte anzubieten und die Anforderungen des sich schnell entwickelnden Marktes zu erfüllen.
Unsere Produkte wurden in die weltweiten Märkte wie USA, Italien, Niederlande, Neuseeland, Frankreich, Schweiz, Irland, Russland, Spanien, Polen, Großbritannien, Südafrika, Brasilien, Mexiko, Saudi-Arabien, Jordanien, Indonesien, Malaysia, Indien, VAE, Island, Australien, Tschechien, Kirgisistan und mehr.
Wir sorgen dafür, die beste Qualität und den niedrigsten Preis bieten, um Ihnen zu helfen, Ihren Markt zu entwickeln, hoffen, langfristige Geschäftsbeziehung mit Ihnen aufzubauen.
Kooperiert mit Gainer International, ihr werdet der Gainer der Welt sein, wir warten auf euch!