Grundlegende Informationen.
Modell Nr.
GCPR-G10 GCPR-D10 GCPR-P10 GCPR-W10
Blitzschutz
Mit Blitzschutz
Bescheinigung
ISO, RoHS, CE
Installation Type
Indoor, Small Size
Technic Advantage
Alc&Agc
Noise Figure
Less Than 6db
Automatic Level Control
More Than 15db,Auto Shut off 31db After 15db
Gain Flatness
Less Than 6db(P-P)
Standard1
GSM Meet Etsi Ts 151 026 V6.1.0
Power Supply
Input AC90~264V,Output DC5V / 2A
Environment Conditions
IP40
Spezifikation
CE ROHS ISO
Produktbeschreibung
Features:
1. Elegant and Compact design
2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3. 15dB MGC(Manual gain control) 5dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.
5. Low power consumption - 6W only.
Electrical specification | Uplink | Downlink |
Frequency Range | CDMA800 | 824 ~ 849 MHz | 869 ~ 894 MHz |
CDMA1900 | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz |
GSM850 | 824 ~ 849 MHz | 869 ~ 894 MHz |
GSM | 890 ~ 915 MHz | 935 ~ 960 MHz |
DCS | 1710 ~ 1785 MHz | 1805 ~ 1880 MHz |
PCS | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz |
WCDMA | 1920 ~ 1980 MHz | 2110 ~ 2170 MHz |
AWS | 1710 ~ 1755 MHz | 2110 ~ 2155 MHz |
LTE | 700 MHz( A, B, C, D band optional) |
2500 ~ 2550 MHz | 2620 ~ 2670 MHz |
Max .Gain | ≥ 60dB | ≥ 65dB |
Max .Output Power | ≥ 10dBm | ≥ 10dBm |
Band width (-3dB) | Wide Band |
MGC ( Step Attenuation ) | ≥ 15dB / 5dB step |
Automatic Level Control | ≥ 15dB,auto shut off 31dB after 15dB |
Gain Flatness | ≤6dB(P-P) |
Noise Figure | ≤6dB |
VSWR | ≤1.8 |
Group Delay | ≤5μs |
Frequency stability | ≤0.01ppm |
Spurious Emission & Output inter-modulation | GSM Meet ETSI TS 151 026 V6.1.0 |
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 ) |
CDMA Meet IS95 & CDMA2000 |
LED Alarm | Standard |
Power LED | Green light when power on. |
ALC LED | Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB, LED off after 5 second red color |
Mechanical Specifications | Standard |
I /O Port | N-Female |
Impedance | 50 ohm |
Operating Temperature | -25ºC~+55ºC |
Environment Conditions | IP40 |
Dimensions | 176x100x44mm |
Weight | ≤ 2Kg |
Power Supply | Input AC90~264V,output DC5V / 2A |
1.1. RF technical specification
Electrical specification | Uplink | Downlink |
Frequency Range | CDMA | 824 ~ 849 MHz | 869 ~ 894 MHz |
GSM900&EGSM | 880 ~ 915 MHz | 925 ~ 960 MHz |
DCS | 1710 ~ 1785 MHz | 1805 ~ 1880 MHz |
PCS | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz |
WCDMA | 1920 ~ 1980 MHz | 2110 ~ 2170 MHz |
AWS | 1710 ~ 1755 MHz | 2110 ~ 2155 MHz |
GSM850 | 824 ~ 849 MHz | 869 ~ 894 MHz |
CDMA1900 | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz |
Max. Gain | 10dBm | >=60dB | >=65dB |
15dBm | >=65dB | >=65dB |
20dBm | >=70dB | >=70dB |
23dBm | >=70dB | >=75dB |
27dBm | >=75dB | >=80dB |
30dBm | >=80dB | >=80dB |
Max. Output power | 10dBm | >=10dBm | >=10dBm |
15dBm | >=12dBm | >=15dBm |
20dBm | >=15dBm | >=20dBm |
23dBm | >=15dBm | >=23dBm |
27dBm | >=20dBm | >=27dBm |
30dBm | >=20dBm | >=30dBm |
Band width (-3dB) | Wide Band |
MGC (Step Attenuation) | >=31dB / 1dB step |
Automatic Level Control | >=15dB auto shut off after 15dB (Optional) |
Spurious Emission | 9KHz~1GHz | <=-36dBm @ 3KHz |
1GHz~12.75GHz | <=-30dBm @ 3KHz |
Noise Figure | <=6dB |
VSWR | <=2.0 |
Group Delay | <=1.5μs |
LED Alarm | Standard |
LED Alarm | LED 1 | Power Indicator |
LED 2 | (ALC 1~5dB,Grange;ALC 15~20dB,Red, then shut off automatically) |
1.2. Mechanical specification
SN | Item | specification |
1 | Environment Conditions | IP40 |
2 | Cooling mode | Nature cooling |
1.3. Environment Conditions
SN | Item | specification |
1 | Operating Temperature | -25°C to +55°C |
2 | Storage Temperature | -40°C to +80°C |
3 | Humidity | 5% to 85% |
1.4. Requirements for adapters
SN | Item | Minimum | Typical value | Maximum |
1 | Input Voltage Range | 90 V | 220 V | 264 V |
2 | Output Voltage Range | 47 Hz | 50Hz | 63 Hz |
2. Installation
The repeaters should be used to cover the indoor area. Humidity and temperature of working environment can affect the reliability of repeater. So, temperature, humidity, dust, interference, power, space requirements and other factors should be considered during installation of repeater.
2.1. Installation Location Requirement
1) It is appreciated that the repeater is installed in a cool, dry and ventilated room without erosive gas and smoke and without leakage on its proof.
2) Or a cool and ventilated wall of which sun-proof and waterproof is expected.
3) Besides above, common wall, tower or high pole is Ok too.
4) Installation height should be easy for RF cable wiring, heat dissipation, security and maintenance.
5) Have a set of independent and stable power supply.
6) Have lightning conductor in the building, tower or high pole with enough strength or stability.
2.2. Power requirement
Generally it is AC power supply, and the requirement of AC is 90~264VAC / 50±5Hz
2.3. Installation tools and accessory
No. | Name | Specification | Quantity | Remark |
1 | Plastic Expansion Bolt | M5*24 | 6 | Standard accessories |
2 | Tapping screw | M3*27 | 4 | Standard accessories |
3 | Hanging folder | | 1 | Standard accessories |
4 | reciprocating drill | | 1 | Engineering-owned, punch the wall |
5 | Shot bit | M3 | 1 | Engineering-owned, punch the wall |
1.1.1. Manual Gain Control (MGC)
Switches 1-5 represent Downlink and 6-10 represent Uplink. When it is necessary to adjust the gain by DIP switch, firstly please adjust Downlink gain according to input signals, secondly please adjust Uplink gain according to Downlink gain.
The DIP Switches have default 'OFF' status; please push relevant switches to "ON" position if certain attenuation value needs to be achieved.
l DIP switch downlink attenuation setting:
Att | 1 | 2 | 3 | 4 | 5 | Att. | 1 | 2 | 3 | 4 | 5 | Att. | 1 | 2 | 3 | 4 | 5 |
0 dB | off | off | off | off | off | 11dB | ON | ON | off | ON | off | 22dB | off | ON | ON | off | ON |
1 dB | ON | off | off | off | off | 12dB | off | off | ON | ON | off | 23dB | ON | ON | ON | off | ON |
2 dB | off | ON | off | off | off | 13dB | ON | off | ON | ON | off | 24dB | off | off | off | ON | ON |
3 dB | ON | ON | off | off | off | 14dB | off | ON | ON | ON | off | 25dB | ON | off | off | ON | ON |
4 dB | off | off | ON | off | off | 15dB | ON | ON | ON | ON | off | 26dB | off | ON | off | ON | ON |
5 dB | ON | off | ON | off | off | 16dB | off | off | off | off | ON | 27dB | ON | ON | off | ON | ON |
6 dB | off | ON | ON | off | off | 17dB | ON | off | off | off | ON | 28dB | off | off | ON | ON | ON |
7 dB | ON | ON | ON | off | off | 18dB | off | ON | off | off | ON | 29dB | ON | off | ON | ON | ON |
8 dB | off | off | off | ON | off | 19dB | ON | ON | off | off | ON | 30dB | off | ON | ON | ON | ON |
9 dB | ON | off | off | ON | off | 20dB | off | off | ON | off | ON | 31dB | ON | ON | ON | ON | ON |
10 dB | off | ON | off | ON | off | 21dB | ON | off | ON | off | ON | | | | | | |
l DIP switch uplink attenuation setting:
Att | 6 | 7 | 8 | 9 | 10 | Att. | 6 | 7 | 8 | 9 | 10 | Att. | 6 | 7 | 8 | 9 | 10 |
0 dB | off | off | off | off | off | 11dB | ON | ON | off | ON | off | 22dB | off | ON | ON | off | ON |
1 dB | ON | off | off | off | off | 12dB | off | off | ON | ON | off | 23dB | ON | ON | ON | off | ON |
2 dB | off | ON | off | off | off | 13dB | ON | off | ON | ON | off | 24dB | off | off | off | ON | ON |
3 dB | ON | ON | off | off | off | 14dB | off | ON | ON | ON | off | 25dB | ON | off | off | ON | ON |
4 dB | off | off | ON | off | off | 15dB | ON | ON | ON | ON | off | 26dB | off | ON | off | ON | ON |
5 dB | ON | off | ON | off | off | 16dB | off | off | off | off | ON | 27dB | ON | ON | off | ON | ON |
6 dB | off | ON | ON | off | off | 17dB | ON | off | off | off | ON | 28dB | off | off | ON | ON | ON |
7 dB | ON | ON | ON | off | off | 18dB | off | ON | off | off | ON | 29dB | ON | off | ON | ON | ON |
8 dB | off | off | off | ON | off | 19dB | ON | ON | off | off | ON | 30dB | off | ON | ON | ON | ON |
9 dB | ON | off | off | ON | off | 20dB | off | off | ON | off | ON | 31dB | ON | ON | ON | ON | ON |
10 dB | off | ON | off | ON | off | 21dB | ON | off | ON | off | ON | | | | | | |
Die Anschrift:
86#, Hou Ting, Number Two Industrial District, Sha Jing, Bao an District, Shenzhen, Guangdong, China
Unternehmensart:
Hersteller/Werk
Geschäftsbereich:
Elektronik
Zertifizierung des Managementsystems:
ISO 9001
Firmenvorstellung:
Gainer International (China) Limited ist ein professionelles Unternehmen, das auf drahtlose Kommunikationsprodukte, Kundenelektronikprodukte spezialisiert ist. Wir sind hoch entwickelnden Unternehmen, mit CE-Zertifikat und GB/T19001-2008 /ISO 9001: 2008. Wir scheuen keine Mühe, gute Produkte und Service für Kunden auf der ganzen Welt zu bieten.
Wir produzieren hauptsächlich Signalverstärker, Verstärker von GSM, CDMA, DCS, WCDMA, IDEN, LTE CDMA450M, auch andere korrelative Produkte. Wir fertigen Produkte durch unser eigenes F&E-Team, das durch erfahrene Exporte in verwandte Bereiche gebildet wurde. Unsere Konstruktion und Fertigung kann den speziellen Anforderungen unserer Kunden entsprechen.
Wir widmen uns der Bereitstellung der zufriedenstellenden Dienstleistungen für unsere Kunden. Wir streben danach, wettbewerbsfähigere Produkte anzubieten und die Anforderungen des sich schnell entwickelnden Marktes zu erfüllen.
Unsere Produkte wurden in die weltweiten Märkte wie USA, Italien, Niederlande, Neuseeland, Frankreich, Schweiz, Irland, Russland, Spanien, Polen, Großbritannien, Südafrika, Brasilien, Mexiko, Saudi-Arabien, Jordanien, Indonesien, Malaysia, Indien, VAE, Island, Australien, Tschechien, Kirgisistan und mehr.
Wir sorgen dafür, die beste Qualität und den niedrigsten Preis bieten, um Ihnen zu helfen, Ihren Markt zu entwickeln, hoffen, langfristige Geschäftsbeziehung mit Ihnen aufzubauen.
Kooperiert mit Gainer International, ihr werdet der Gainer der Welt sein, wir warten auf euch!