China Manufacturer Industrial/Commercial Sawdust/Wood/Biomass Pellet Machine
Product Description
Bioenergy pellet machine is our company patent products, our company is the pellet machine
Our this series pellet press is applied to the materials with low adhesiveness and low shaping, such as biomass waste from sawdust, rice husk, coffee husk, agricultural stalk, straw, peanut shell, sun flower seed, palm shell, paper, plastic etc, fertilizer materials such as animal manure, plant waste etc.
Bioenergy rice straw pellet press adopts the hart part adopts "double-layer die" as the unique structure; The roller are made by abrasion proof alloy stell improving the use life to spare part greatly; For the drive parts, the grease is filtrated automatically lubricated properly; Special design, rational structure, low power consumption, high efficiency.
Our pellet press contains automatical lubricate spare parts oil systems, which can lubricate spare parts oil automatically---- such as rollers, vertical shaft, gears, bearings, this technology got national patent.
Bioenergy rice straw pellet press works with air fan and bags dust filter, on one hand, it will clean dust, very environmental protection. On the other hand, it can cool pellet machine inner spare parts heat temperature, making sure long continuous working hours. This character is our products different from other suppliers products.
Detailed Photos
Common Raw Materials
Wood:pine; poplar; branches; bark; sawdust; shavings; etc.
Straw: corn straw; wheat straw; straw; rice husk; peanut shell; etc.
Waste:building templates; Demolition materials; sludge; etc.
Our Advantages
1.wood pellet machine can press high crude fiber biomass and chemical fertilizer materials into 2-8MM diameter pellets. it is specially fit for biomass waste from wheat straw or rice straw, corn stalk, rice husk , palm fiber ,palm shell or groundnut shell , very hard wood e.c.t, also can press fertilizer granules from animal manure, plant waste, chemical waste e.c.t ,before pelletizing , raw materials should crush into fine powder, humidity should control between 15%-20%.
2.wood pellet machine adopts both common ring die pellet machine and flat die pellet machine advantages ,working principle is roller assemble rotary, the ring die keep stable, producing high pressure and press very low adhesive biomass waste into high density pellets --- 1.1-1.4ton/m3. pellet length can be adjusted.
3.wood pellet machine contains hydraulic pump, which can adjust pressure between rollers and ring die to fit for different materials pressure ratio. when adjusted to the fit pressure, pressure will keep stable automatically, but other supplier pellet press need to adjust pressure manually each time .
4.sawdust pellet machine also contains automatical lubricate spare parts oil systems , which can lubricate spare parts oil automatically---- such as rollers, vertical shaft ,gears, bearings ,but other common supplier pellet machine needs to add oil each four working hours, very trouble to operate. this technology got national patent.
5.wood pellet machine adopts flat die pellet machine vertical feeding materials advantages , feed materials vertically and directly to pelletizing room , ring die and roller assemble works in horizontal type, but other supplier common ring die pellet machine only can feed materials from gear box side and its ring die works in vertical type, their feeding speed and working efficiency are both very low. Its spare parts can not produce large pressure, especially inner big shaft and bearings , if can not produce large pressure ,after long continuous hours , will be easily broken.
6.wood pellet machine has one ring die with two--layers : the top layer and bottom layer .when pellet machine works , Roller assemble will rotary ,toughing with ring die bottom layer ,the ring die keeps stable , once ring die bottom layer was broken , turn over it and make the top layer to bottom, then it will work secondly time . So one ring die can use two times .also the top and bottom layer hole dimension can be different, so one ring die can press into two different diameter pellets .but other supplier pellet machine just have one layer and only can press one dimension pellets.
7.wood pellet machine works with air fan and bags dust filter, on one hand, it will clean dust, very environmental protection . on the other hand, it can cool pellet machine inner spare parts heat temperature ,making sure long continuous working hours.
8.wood pellet machine all spare parts are made by CNC systems , through high technical heat treatment . we sold out more than 5000 sets XGJ pellet machine per year, have big discount for old customer, greatly welcome to askme for details.
Technical Parameters
| Product Parameters |
| Models |
Size(MM) |
Weight(T) |
Power(KW) |
Output(T/H) |
| XGJ560 |
2438*1584*1818 |
5.3 |
90 |
1-1.5 |
| 132 |
1.5-2 |
| 160 |
2-2.5 |
| XGJ850 |
2866*1830*2190 |
13.6 |
250 |
3-4 |
Company Profile
Packaging & Shipping
FAQ
Q: What is a pellet mill/pellet machine?
A: A pellet mill/pellet machine is a machine that takes raw materials and shapes it into pellet form for multiple uses.
Q:What kind of materials can be pelletized?
A: Materials such as wood wastes, saw dust, corn cobs/stover/stalks, straw, switch grass, other grasses, distillers grain, paper, etc. Basically, most Biomass materials that can be ground down to sawdust form can be pelletized.
Q. What is your payment term?
A: 30% of the total price shall be paid by telegraphic transfer as the down payment; 70% of the remaining payment shall be paid by telegraphic transfer prior to delivery.
Q: What documents you can offer?
A: We can offer invoice, packing list, contract, instructions, customs declaration, certificate of origin, CE. If client need other documents, specifications, please confirm with service staff.
Q: Are you a trading company or a manufacturer?
A: We are a source factory, with our own machining shop, accessories can be supplied for a long time.
Geprüfter Lieferant 
Geprüfter Lieferant 
