Grundlegende Informationen.
Klassifikation
Beleuchtung / Power
Standby-Zeit
Standardmaschine
Standby-UPS
Sinus-Ausgangs UPS
Ausgabekapazität
Medium Art
Dimension
260mmx570mmx717mm
Output Waveform
Pure Sine Wave
Herkunft
Guangdong, China
Produktbeschreibung
High Frequency 1-20kVA PF 0.9 Online UPS
Key features:
1. True online double conversion technology
2. Wide input voltage range
3. Zero transfer time
4. Protection against all types of power problems
5. No add-on CNTL unit required for parallel connection
6. Low initial investment and flexible for future expansion
7. Highest reliability and maximum performance for power sharing and redundancy
8. Equipped with maintenance bypass switch
The best charger is designed to recharge low battery as quickly as possible with out damaging batteries in 2 AMP up to 8 AMP and 240VDC. Allowing 90% recharge in as little as 10 hours after a total drain.
A). Audible and visual over-load indicator
The incorporated LED over load indicator prevents UPS overloads and premature failure of the UPS.
B). N+1 parallel redundancy
Allows a 6 kVA to grow up to 18kVA or 12kVA with 6kVA redundancy, allowing user to add capacity as needed and lower investment.
C). Simplified board separation
Dependent on the units all operation are separated into 5 PCBs allowing quick respond to damages and provides our valued dealers with simplified inventory and faster service to the end users.
D). Dynamic bypass
Automatic dynamic bypass and manual bypass provide a loop to repair UPS with out having to disconnect loads ideal for non stop computing for critical applications.
E). SNMP slot
Provides remote monitoring and control of UPS where a PC is not present or where this function is needed to be separated.
F)AS 400 dry contact card
Optional card to communicate in AS 400 protocols
G). Sine-wave output
True sine-wave output with a 3% THD on batteries. This feature provides dependable and compatible power for your most critical applications.
H). True double conversion technology with zero transfer time
This advance design provides the closest you can get to pure constant power in the industry.
Technical specification:
Model | H1KS | H2KS | H3KS |
Rated power | VA/W | 1KVA/0.7KW | 2KVA/1.4KW | 3KVA/2.1KW |
Input | Nominal voltage | 220VAC |
Voltage range | 115~300VAC |
Frequency range | 46~54Hz(default), user adjustable within 40~60Hz |
Power efficiency | 0.97 |
Connection | IEC320-10A inlet | IEC320-16A inlet |
Output | Voltage | 220VAC±2% |
Frequency | 46~54Hz or 50Hz±0.2(line mode) 50Hz±0.2Hz(battery mode) |
Waveform | Pure sine wave |
Distortion | 3% | 4% |
Overload capability | 108%~150% for 30 sec., 150% for 300ms |
Current crest ratio | 3:1 |
Connection | IEC320*4 | IEC320*6 | IEC320*3 and terminal block |
Battery | Type | Sealed, maintenance free, lead-acid |
Quantity | 3 pieces | 6 pieces | 8 pieces |
Back-up time(full load) | 5 min | 9 min | 5 min |
Recharge time | 5 hrs to 90% of capacity after full load discharge |
Bypass | Automatic transfer | On overload and UPS failure |
Before UPS power-on | Default "NO", user adjustable to "YES" |
Voltage range | 80~264VAC(default), user adjustable within 80~286VAC |
Transfer time | 0 ms; less than 4ms from inverter to bypass and vice versa |
LED indicators | Status | Load level/battery level, battery , utility power, inverter, bypass, overload, fault |
Audible alarm | Bypass, on battery mode, battery low, overload, fault |
Acoustic noise | At 1 meter distance | 45 dB | 50 dB |
Communication | DB-9 port | RS-232 serial interface |
Intelligent slot | Options: Webpower, AS400 card or Winpower CMC |
Network surge protection | RJ45 I/O port available for network or fax/modem |
Environmental | Operating temperature | 0~40°C |
Operating humidity | 20~90% non-condensing |
Weight | Net(Kg) | 13 | 31.5 | 32 |
Dimension | WxDxH(mm) | 145x400x220 | 192x460x348 |
Model | H1KL | H2KL | H3KL |
Rated power | VA/W | 1KVA/0.7KW | 2KVA/1.4KW | 3KVA/2.1KW |
Input | Nominal voltage | 220VAC |
Voltage range | 115~300VAC |
Frequency range | 46~54Hz(default), user adjustable within 40~60Hz |
Power factor | 0.97 |
Connection | IEC320-10A inlet | IEC320-16A inlet |
Output | Voltage | 220VAC±2% |
Frequency | 46~54Hz or 50Hz±0.2(line mode) 50Hz±0.2Hz(battery mode) |
Waveform | Pure sine wave |
Distortion | 3% | 4% |
Overload Capability | 108%~150% for 30 sec., 150% for 300ms |
Current crest ratio | 3:1 |
Connection | IEC320-10A*4 | IEC320-10A*6 | IEC320-10A*3 and terminal block |
Battery | Type | Sealed, maintenance free, lead-acid |
Nominal DC voltage | 36VDC | 96VDC | 96VDC |
Back-up time | Depends on the capacity of the external battery bank |
Connection | External battery socket |
Bypass | Automatic transfer | On overload and UPS failure |
Before UPS power-on | Default "NO", user adjustable to "YES" |
Voltage range | 80~264VAC(default), user adjustable within 80~ 286VAC |
Transfer time | 0 ms; less than 4 ms from inverter to bypass and vice versa |
LED indicators | Status | Load level/battery level, battery, utility power, inverter, bypass, overload, fault |
Audible alarm | Bypass, on battery mode, battery low, overload, fault |
Acoustic noise | At 1 meter distance | 45 dB | 50 dB |
Communication | DB-9 port | RS-232 serial interface |
Intelligent slot | Options: WebPower, AS400 card or WinPower CMC |
Network surge protection | RJ45 I/O port available for 10 base-T network or fax/modem |
Environmental | Operating temperature | 0~40°C |
Operating humidity | 20~90% non-condensing |
Weight | Net(Kg) | 7 | 13.5 | 14 |
Dimension | W x D x H(mm) | 145x400x220 | 192x460x348 |
Model | H6KS/H6KL | H10KS/H10KL |
Rated power | VA/W | 6KVA/4.2KW | 10KVA/7KW |
Input | Nominal voltage | 220VAC |
Voltage range | 176~276VAC |
Frequency range | 46~54Hz |
Power factor | 0.98 |
Connection | Hardwired |
Output | Voltage | 220VAC ± 1% |
Frequency | 50Hz ± 0.1%(battery mode) |
Waveform | Pure sine wave |
Power factor | 0.8 |
Voltage distortion | 2% under linear load |
Overload capability | 105%~130% for 10 min., ³ 130% for 1 min. |
Current crest ratio | 3:1 Max. |
Connection | Hardwired |
Battery | Type | Sealed, maintenance free, lead-acid |
Quantity | 20 pieces |
Back-up time(full load) | 7 min | 5 min |
Recharge time | 8 hrs to 90% of capacity after full load discharge |
Transfer time | 0ms |
Maintenance bypass switch | Yes |
LED indicators | Status | Load level/battery level, battery, utility power, inverter, bypass, overload, fault |
Audible alarm | Bypass | Alarm beeps every two minutes |
Battery discharge | Alarm beeps every four seconds, every second if battery low |
Overload | Alarm beeps two for every second |
Fault | Alarm beeps continuously |
Acoustic noise | At 1 meter distance | £ 55 dB |
Communication | DB-9 port | RS232 serial interface |
Intelligent slot | Options: WebPower, AS400 or WinPower CMC |
Parallel port | Up to three units in parallel for power redundancy and load sharing |
Environmental | Operating temperature | 0~40 ° C |
Operating humidity | 20%~90% non-condensing |
Weight | Net(Kg) | 35/84 | 38/93 |
Dimension | WxDxH(mm) | 260x570x717 |
Die Anschrift:
Floor 1-4, B16, No. 1 Road, 1st Industrial Park, Baihuadong Village, Shenzhen, Guangdong, China
Unternehmensart:
Hersteller/Werk, Handelsunternehmen
Geschäftsbereich:
Elektronik, Industrielle Anlagen und Zusatzteile
Zertifizierung des Managementsystems:
ISO 9001
Firmenvorstellung:
Pocasa Electronic Limited ist in der Entwicklung, Herstellung und dem Vertrieb von äußerst zuverlässigen und kostengünstigen unterbrechungsfreien Stromversorgungen (USV) tätig, einschließlich Niederfrequenz-Online-USV, Hochfrequenz-Online-USV und reinem Sinus-Wechselrichter und modifiziertem Sinus-Wechselrichter für globale Kunden.
Produktionsfähigkeit
heute produziert POCASA 100, 000 STÜCK Netzteile pro Monat, einschließlich USVs, Wechselrichter, Stabilisatoren/AVRs und Batterieladegeräte mit Leistungsstufen von 0,5kVA bis 400kVA. POCASA optimiert die Just in Time (JIT)-Ressourcenplanung und Bestandskontrolle und unterstützt unsere Kunden mit minimierten Vorlaufzeiten und flexiblen Lieferplänen.
Qualitätssicherung
POCASA verfügt über ISO9001 zertifizierte Einrichtungen. Unsere Produkte sind auch anerkannt durch CE, UL, TÜV, CSA, FCC, Usw., um Qualität und Sicherheit zu gewährleisten. Die modernen Anlagen von POCASA verfügen über erstklassige Fertigungskapazitäten und Technologien zur Herstellung hochwertiger Netzteile.
SMT Systeme
Löt-Paste Siebsysteme
in-Circuit Auto-Test Systeme
automatisierte Lager- und Retrieval-Systeme
Wave-Lötsysteme
Burn-in Racks
Automatische Testsysteme
Unsere Vorteile
POCASA wird sich auch weiterhin für perfekte Power-Management-Lösungen auszeichnen. POCASA ist sicher, Ihr hervorragender Anbieter zu sein, und zwar durch:
1) die neuesten Technologien
2) Echtzeit-Technologie unterstützt von einem engagierten und gut ausgebildeten Techniker-Team
3) Schnelle Reaktion auf Pre-Sales- und After-Sales-Anfragen
4) EIN weltweites Netzwerk aus Märkten
POCASA ist stolz auf unsere Expertise im Angebot hochwertiger Netzteile für Allzweck-Anwendungen. Sie sind eingeladen, die Werke von POCASA jederzeit zu besuchen, um zu sehen, wie POCASA entwickelt und herstellt. Sie werden auch aufgefordert, POCASA zu kontaktieren, um professionelle technische Unterstützung zu erhalten.