Grundlegende Informationen.
Die Anzahl der Zeilen
Single
Sphärisch
Nicht-Pendellager
Lastrichtung
Peilung zum Herz
Produktbeschreibung
RSTO :No retaining edge in outer ring,yoke type track rollers without inner ring 

STO :No retaining edge in outer ring,yoke type track rollers with inner ring 

RNA22- 2RS :Double face sealed, yoke type track rollers without inner ring 

NA22 - 2RS :Double face sealed, yoke type track rollers with inner ring 

NATR 
NATR - PP 
Plain retaining ring,axial guiding, yoke type track rollers 

NATV 
NATV - PP 
Plain retaining ring,axial guiding, yoke type track rollers 
Full complement needle roller type 

NUTR :Rolling body guiding,yoke type track rollers,full roller type 

CRY :Inch system,plain retaining ring,axial guiding, yoke type track rollers 

Tolerance
In common cases,the precision of the dimensions,shape and the rotation of this yoke type track roller is P0 grade.The outer diameter tolerance of the yoke type track roller with an arc outer diameter is 0 to -0.05mm,the width tolerance of NATR,NATV,NUTR bearings is h12.

Center adjustability
The yoke type track roller with diameter of cylindrical shape have very small center adjustability.With low load,the center adjustability is 3-4'which with middle and heavy load,it is 5-7'.The yoke type track with diameter of arc shape have a center adjustability of 15-20'.For bigger angle variation,the edge effect will increase with the different loads.This will decrease the life of the bearing.


RSTO and STO type yoke type track rollers
RSTO series yoke type track rollers RSTO type,without inner ring,can directly run on the quenched shaft.STO type has inner rings,its inner ring,outer ring and the combinative needle roller retainer assembly can be fitted separately.Because RSTO and STO type yoke type track rollers have no retaining edges and the end retaining rings,axial guiding is needed in fitting.the guiding surface must be precisely machined at least.




Outside Diameter | 

Bearing Designation and mass approx | 

Borndary Dimensions | 

Basic Load Rating | 

Limiting Speed |

Without IR | 
Mass | 

With IR | 
Mass | 
D | 
d | 
F 1
Fw | 
B | 
C | 
E | 
Cr
Dynamic | 
Cor
Static | 
 | 
3
Grease |

Cw | 
Cow |

mm | 
g | 
g | 
mm | 
N | 
rpm |

16 | 
RSTO 5 TN | 
8.5 | 
-- | 
-- | 
16 | 
-- | 
7 | 
-- | 
7.8 | 
10 | 
2800 | 
2600 | 
2550 | 
2550 | 
23000 |

RSTO 5 TN X | 
8.5 | 
-- | 
-- | 
16 | 
-- | 
7 | 
-- | 
7.8 | 
10 | 
2800 | 
2600 | 
1990 | 
1990 | 
23000 |

19 | 
RSTO 6 TN | 
12.5 | 
STO 6 TN | 
17 | 
19 | 
6 | 
10 | 
10 | 
9.8 | 
13 | 
4700 | 
5450 | 
3750 | 
4500 | 
20000 |

RSTO 6 TN X | 
12.5 | 
STO 6 TN X | 
17 | 
19 | 
6 | 
10 | 
10 | 
9.8 | 
13 | 
4700 | 
5450 | 
3050 | 
4000 | 
20000 |

24 | 
RSTO 8 TN | 
21 | 
STO 8 TN | 
26 | 
24 | 
8 | 
12 | 
10 | 
9.8 | 
15 | 
4800 | 
6000 | 
4200 | 
5500 | 
16000 |

RSTO 8 TN X | 
21 | 
STO 8 TN | 
26 | 
24 | 
8 | 
12 | 
10 | 
9.8 | 
15 | 
4800 | 
6000 | 
3000 | 
5000 | 
16000 |

30 | 
RSTO 10 | 
42 | 
STO 10 | 
49 | 
30 | 
10 | 
14 | 
12 | 
11.8 | 
20 | 
10200 | 
10500 | 
8400 | 
9200 | 
11000 |

RSTO 10 X | 
42 | 
STO 10 X | 
49 | 
30 | 
10 | 
14 | 
12 | 
11.8 | 
20 | 
10200 | 
10500 | 
8000 | 
8800 | 
11000 |

32 | 
RSTO 12 | 
49 | 
STO 12 | 
57 | 
32 | 
12 | 
16 | 
12 | 
11.8 | 
22 | 
11300 | 
12300 | 
8900 | 
10100 | 
9000 |

RSTO 12 X | 
49 | 
STO 12 X | 
57 | 
32 | 
12 | 
16 | 
12 | 
11.8 | 
22 | 
11300 | 
12300 | 
8500 | 
9600 | 
9000 |

35 | 
RSTO 15 | 
50 | 
STO 15 | 
63 | 
35 | 
15 | 
20 | 
12 | 
11.8 | 
26 | 
13200 | 
16000 | 
9100 | 
10700 | 
6500 |

RSTO 15 X | 
50 | 
STO 15 X | 
63 | 
35 | 
15 | 
20 | 
12 | 
11.8 | 
26 | 
13200 | 
16000 | 
8700 | 
9900 | 
6500 |

40 | 
RSTO 17 | 
88 | 
STO 17 | 
107 | 
40 | 
17 | 
22 | 
16 | 
15.8 | 
29 | 
19800 | 
25300 | 
14300 | 
17700 | 
5500 |

RSTO 17 X | 
88 | 
STO 17 X | 
107 | 
40 | 
17 | 
22 | 
16 | 
15.8 | 
29 | 
19800 | 
25300 | 
12500 | 
15700 | 
5500 |

47 | 
RSTO 20 | 
130 | 
STO 20 | 
152 | 
47 | 
20 | 
25 | 
16 | 
15.8 | 
32 | 
20800 | 
27800 | 
16200 | 
21500 | 
4700 |

RSTO 20 X | 
130 | 
STO 20 X | 
152 | 
47 | 
20 | 
25 | 
16 | 
15.8 | 
32 | 
20800 | 
27800 | 
15000 | 
19900 | 
4700 |

52 | 
RSTO 25 | 
150 | 
STO 25 | 
177 | 
52 | 
25 | 
30 | 
16 | 
15.8 | 
37 | 
23000 | 
33400 | 
16500 | 
22900 | 
3600 |

RSTO 25 X | 
150 | 
STO 25 X | 
177 | 
52 | 
25 | 
30 | 
16 | 
15.8 | 
37 | 
23000 | 
33400 | 
14000 | 
20900 | 
3600 |

62 | 
RSTO 30 | 
255 | 
STO 30 | 
308 | 
62 | 
30 | 
38 | 
20 | 
19.8 | 
46 | 
35200 | 
56700 | 
23300 | 
35000 | 
2500 |

RSTO 30 X | 
255 | 
STO 30 X | 
308 | 
62 | 
30 | 
38 | 
20 | 
19.8 | 
46 | 
33200 | 
56700 | 
21800 | 
33000 | 
2500 |

72 | 
RSTO 35 | 
375 | 
STO 35 | 
441 | 
72 | 
35 | 
42 | 
20 | 
19.8 | 
50 | 
35800 | 
58800 | 
26000 | 
41000 | 
2200 |

RSTO 35 X | 
375 | 
STO 35 X | 
441 | 
72 | 
35 | 
42 | 
20 | 
19.8 | 
50 | 
35800 | 
58800 | 
24500 | 
38900 | 
2200 |

80 | 
RSTO 40 | 
420 | 
STO 40 | 
530 | 
80 | 
40 | 
50 | 
20 | 
19.8 | 
58 | 
35200 | 
61800 | 
24000 | 
39000 | 
1700 |

RSTO 40 X | 
420 | 
STO 40 X | 
530 | 
80 | 
40 | 
50 | 
20 | 
19.8 | 
58 | 
35200 | 
61800 | 
22500 | 
36500 | 
1700 |

85 | 
RSTO 45 | 
453 | 
STO 45 | 
576 | 
85 | 
45 | 
55 | 
20 | 
19.8 | 
63 | 
38900 | 
73900 | 
25500 | 
43000 | 
1500 |

RSTO 45 X | 
453 | 
STO 45 X | 
576 | 
85 | 
45 | 
55 | 
20 | 
19.8 | 
63 | 
38900 | 
73900 | 
24000 | 
41500 | 
1500 |

90 | 
RSTO 50 | 
481 | 
STO 50 | 
617 | 
90 | 
50 | 
60 | 
20 | 
19.8 | 
68 | 
43300 | 
84800 | 
26000 | 
46500 | 
1300 |

RSTO 50 X | 
481 | 
STO 50 X | 
617 | 
90 | 
50 | 
60 | 
20 | 
19.8 | 
68 | 
43300 | 
84800 | 
22800 | 
44000 | 
1300 |



Dimensions | 
Dynamic | 
Static | 
Dynamic | 
Static | 
Designations |

D(mm) | 
d(mm) | 
C(mm) | 
C kn | 
C0 | 
Fr | 
F0r |

19 | 
6 | 
9,8 | 
3,74 | 
4,5 | 
4,25 | 
6,1 | 
STO 6 TN |

19 | 
6 | 
11,8 | 
3,52 | 
3 | 
1,93 | 
2,75 | 
NA 22/6.2RS |

24 | 
8 | 
9,8 | 
4,13 | 
5,4 | 
7,5 | 
10,8 | 
STO 8 TN |

24 | 
8 | 
11,8 | 
4,46 | 
4,4 | 
5 | 
7,1 | 
NA 22/8.2RS |

30 | 
10 | 
11,8 | 
8,25 | 
8,8 | 
8,5 | 
12,2 | 
STO 10 |

30 | 
10 | 
13,8 | 
6,44 | 
7,2 | 
12 | 
17 | 
NA 2200.2RS |

32 | 
12 | 
11,8 | 
8,8 | 
9,8 | 
8,3 | 
12 | 
STO 12 |

32 | 
12 | 
13,8 | 
6,93 | 
8,15 | 
11,6 | 
16,6 | 
NA 2201.2RS |

35 | 
15 | 
11,8 | 
9,13 | 
10,6 | 
7,1 | 
10 | 
STO 15 |

35 | 
15 | 
13,8 | 
7,21 | 
9 | 
9,65 | 
13,7 | 
NA 2202.2RS |

40 | 
17 | 
15,8 | 
9,35 | 
12,9 | 
16 | 
22,8 | 
NA 2203.2RS |

40 | 
17 | 
15,8 | 
14,2 | 
17,6 | 
12 | 
17,3 | 
STO 17 |

47 | 
20 | 
15,8 | 
16,1 | 
21,2 | 
18,6 | 
26,5 | 
STO 20 |

47 | 
20 | 
17,8 | 
15,4 | 
17,3 | 
17,6 | 
25,5 | 
NA 2204.2RS |

52 | 
25 | 
15,8 | 
16,5 | 
22,8 | 
18 | 
26 | 
STO 25 |

52 | 
25 | 
17,8 | 
16,1 | 
19 | 
17,3 | 
24,5 | 
NA 2205.2RS |

62 | 
30 | 
19,8 | 
17,6 | 
24,5 | 
28,5 | 
40,5 | 
NA 2206.2RS |

62 | 
30 | 
19,8 | 
22,9 | 
34,5 | 
23,6 | 
33,5 | 
STO 30 |

72 | 
35 | 
19,8 | 
25,5 | 
40,5 | 
36 | 
51 | 
STO 35 |

72 | 
35 | 
22,7 | 
22 | 
34 | 
39 | 
56 | 
NA 2207.2RS |

80 | 
40 | 
19,8 | 
23,8 | 
39 | 
34,5 | 
49 | 
STO 40 |

80 | 
40 | 
22,7 | 
27 | 
39 | 
37,5 | 
53 | 
NA 2208.2RS |

85 | 
45 | 
19,8 | 
25,1 | 
43 | 
34,5 | 
50 | 
STO 45 |

90 | 
50 | 
19,8 | 
26 | 
45,5 | 
34,5 | 
50 | 
STO 50 |

90 | 
50 | 
22,7 | 
27 | 
41,5 | 
36,5 | 
52 | 
NA 2210.2RS |



RNA22...2RS,NA22...2RS type yoke type track rollers
The diameter of such rollers is the same as STO series rollers but a little wider.Its double face sealed structure ensures no maintenance requested.The operational temperature range is
 -20°C-120°C.When fitting the yoke type track rollers without inner rings (RNA22...2RS)series,noice no damage to the sealing rings should occur.The outer ring needs end face guidance.


 
Shaft 
Diameter | 
 
Bearing Designation | 
 
BoundaryDimensions | 
 
BasicLoadRating | 
 
Limiting Speed |

 
Without IR | 
 
Mass | 
 
With IR | 
 
Mass | 
d | 
Fw | 
D | 
B | 
C | 
 
Dynamic | 
 
Static | 
Oil |

mm | 
g | 
g | 
mm | 
N | 
rpm |

19 | 
RNA22/6 2RS | 
18 | 
NA22/6 2RS | 
22 | 
6 | 
10 | 
19 | 
12 | 
11.8 | 
5000 | 
4350 | 
18000 |

RNA22/6 2RSX | 
18 | 
NA22/6 2RSX | 
22 | 
6 | 
10 | 
19 | 
12 | 
11.8 | 
5000 | 
4350 | 
18000 |

24 | 
RNA22/8 2RS | 
29 | 
NA22/8 2RS | 
34 | 
8 | 
12 | 
24 | 
12 | 
11.8 | 
5500 | 
5200 | 
14000 |

RNA22/8 2RSX | 
29 | 
NA22/6 2RSX | 
34 | 
8 | 
12 | 
24 | 
12 | 
11.8 | 
5500 | 
5200 | 
14000 |

30 | 
RNA2200 2RS | 
52 | 
NA2200 2RS | 
60 | 
10 | 
14 | 
30 | 
14 | 
13.8 | 
7600 | 
8100 | 
11000 |

RNA2200 2RSX | 
52 | 
NA2200 2RSX | 
60 | 
10 | 
14 | 
30 | 
14 | 
13.8 | 
7600 | 
8100 | 
11000 |

32 | 
RNA2201 2RS | 
57 | 
NA2201 2RS | 
67 | 
12 | 
16 | 
32 | 
14 | 
13.8 | 
8500 | 
9700 | 
9500 |

RNA2201 2RSX | 
57 | 
NA2201 2RSX | 
67 | 
12 | 
16 | 
32 | 
14 | 
13.8 | 
8500 | 
9700 | 
9500 |

35 | 
RNA2202 2RS | 
60 | 
NA2202 2RS | 
75 | 
15 | 
20 | 
35 | 
14 | 
13.8 | 
9600 | 
12000 | 
7000 |

RNA2202 2RSX | 
60 | 
NA2202 2RSX | 
75 | 
15 | 
20 | 
35 | 
14 | 
13.8 | 
9600 | 
12000 | 
7000 |

40 | 
RNA2203 2RS | 
94 | 
NA2203 2RS | 
112 | 
17 | 
22 | 
40 | 
16 | 
15.8 | 
12000 | 
16500 | 
6000 |

47 | 
RNA2204 2RS | 
152 | 
NA2204 2RS | 
177 | 
20 | 
25 | 
47 | 
18 | 
17.8 | 
18500 | 
21900 | 
4600 |

RNA2204 2RSX | 
152 | 
NA2204 2RSX | 
177 | 
20 | 
25 | 
47 | 
18 | 
17.8 | 
18500 | 
21900 | 
4600 |

52 | 
RNA2205 2RS | 
179 | 
NA2205 2RS | 
209 | 
25 | 
30 | 
52 | 
18 | 
17.8 | 
20100 | 
26000 | 
3500 |

RNA2205 2RSX | 
179 | 
NA2205 2RSX | 
209 | 
25 | 
30 | 
52 | 
18 | 
17.8 | 
20100 | 
26000 | 
3500 |

62 | 
RNA2206 2RS | 
284 | 
NA2206 2RS | 
324 | 
30 | 
35 | 
62 | 
20 | 
19.8 | 
23000 | 
28000 | 
2800 |

RNA2206 2RSX | 
284 | 
NA2206 2RSX | 
324 | 
30 | 
35 | 
62 | 
20 | 
19.8 | 
23000 | 
28000 | 
2800 |

72 | 
RNA2207 2RS | 
432 | 
NA2207 2RS | 
505 | 
35 | 
42 | 
72 | 
23 | 
22.7 | 
29800 | 
46300 | 
2200 |

RNA2207 2RSX | 
432 | 
NA2207 2RSX | 
505 | 
35 | 
42 | 
72 | 
23 | 
22.7 | 
29800 | 
46300 | 
2200 |

80 | 
RNA2208 2RS | 
530 | 
NA2208 2RS | 
628 | 
40 | 
48 | 
80 | 
23 | 
22.7 | 
38200 | 
57700 | 
1700 |

RNA2208 2RSX | 
530 | 
NA2208 2RSX | 
628 | 
40 | 
48 | 
80 | 
23 | 
22.7 | 
38200 | 
57700 | 
1700 |

85 | 
RNA2209 2RS | 
545 | 
NA2209 2RS | 
655 | 
45 | 
52 | 
85 | 
23 | 
22.7 | 
40300 | 
63800 | 
1600 |

RNA2209 2RSX | 
545 | 
NA2209 2RSX | 
655 | 
45 | 
52 | 
85 | 
23 | 
22.7 | 
40300 | 
63800 | 
1600 |

90 | 
RNA22010 2RS | 
563 | 
NA22010 2RS | 
690 | 
50 | 
58 | 
90 | 
23 | 
22.7 | 
66000 | 
86000 | 
1300 |

RNA22010 2RSX | 
563 | 
NA22010 2RSX | 
690 | 
50 | 
58 | 
90 | 
23 | 
22.7 | 
66000 | 
86000 | 
1300 |


NATR and NATR...PP type yoke type track rollers
NATR series roller contains outer ring,inner ring,needle retainer assembly and the retaining rings which are pressed and fixed by the two sides of inner ring.NATR...PP series has an additional sealing ring.This kind of yoke type track rollers have huge lubricant storage space,so they can be used for long period without re-grease.

NATV and NATV...PP type yoke type track rollers
NATV series yoke type track roller is basically the same as NATR series.The only difference is that NATV is full complement needle roller type.Therefore it can sustain heavier load under low speed.Frequent lubricating should be noticed.NATV...PP is a series with sealing ring structure.



Shaft diaeter | 
Bearing designation | 
Dimensions | 
Basic load rating | 
Limiting speed |

Without inner ring | 
weight | 
With inner ring | 
weight | 
d | 
D | 
B | 
C | 
d1 | 
dynamic | 
static | 
As yoke type track rollers | 
grease |

CW | 
COW |

mm | 
g | 
g | 
mm | 
N | 
rpm |

16 | 
NATR5 | 
14 | 
NATR5PP | 
14 | 
5 | 
16 | 
12 | 
11 | 
12 | 
3050 | 
3000 | 
2050 | 
2400 | 
22000 |

NATV5 | 
15 | 
ANTV5PP | 
15 | 
5 | 
16 | 
12 | 
11 | 
12 | 
4500 | 
6300 | 
3680 | 
4300 | 
8500 |

19 | 
NATR6 | 
20 | 
NATR6PP | 
20 | 
6 | 
19 | 
12 | 
11 | 
14 | 
3600 | 
3650 | 
2450 | 
2850 | 
20000 |

NATV6 | 
21 | 
NATV6PP | 
21 | 
6 | 
19 | 
12 | 
11 | 
14 | 
5700 | 
8700 | 
4600 | 
6750 | 
7000 |

24 | 
NATR8 | 
41 | 
NATR8PP | 
41 | 
8 | 
24 | 
15 | 
14 | 
19 | 
4500 | 
5400 | 
3900 | 
4500 | 
5000 |

NATV8 | 
42 | 
ANTV8PP | 
42 | 
8 | 
24 | 
15 | 
14 | 
19 | 
8600 | 
12000 | 
6700 | 
9800 | 
5500 |

30 | 
NATR10 | 
64 | 
NATR10PP | 
64 | 
10 | 
30 | 
15 | 
14 | 
23 | 
6100 | 
7800 | 
4500 | 
6900 | 
11000 |

NATV10 | 
65 | 
NATV10PP | 
65 | 
10 | 
30 | 
15 | 
14 | 
23 | 
10900 | 
17000 | 
7600 | 
11800 | 
4500 |

32 | 
NATR12 | 
71 | 
NATR12PP | 
71 | 
12 | 
32 | 
15 | 
14 | 
25 | 
6600 | 
9800 | 
4660 | 
7000 | 
9000 |

NATV12 | 
72 | 
ANTV12PP | 
72 | 
12 | 
32 | 
15 | 
14 | 
25 | 
11800 | 
19000 | 
7800 | 
13000 | 
3900 |

35 | 
NATR15 | 
103 | 
NATR15PP | 
103 | 
15 | 
35 | 
19 | 
18 | 
27 | 
10500 | 
17500 | 
7800 | 
11500 | 
7000 |

NATV15 | 
105 | 
NATV15PP | 
105 | 
15 | 
35 | 
19 | 
18 | 
27 | 
16000 | 
32500 | 
10200 | 
20500 | 
3400 |

40 | 
NATR17 | 
144 | 
NATR17PP | 
144 | 
17 | 
40 | 
21 | 
20 | 
32 | 
11800 | 
19400 | 
9500 | 
13500 | 
6000 |

NATV17 | 
152 | 
ANTV17PP | 
152 | 
17 | 
40 | 
21 | 
20 | 
32 | 
19600 | 
37000 | 
1200 | 
23000 | 
2900 |

47 | 
NATR20 | 
246 | 
NATR20PP | 
246 | 
20 | 
47 | 
25 | 
24 | 
37 | 
17500 | 
29800 | 
13500 | 
22500 | 
4900 |

NATV20 | 
254 | 
NATV20PP | 
254 | 
20 | 
47 | 
25 | 
24 | 
37 | 
25800 | 
57000 | 
19000 | 
39500 | 
2600 |

52 | 
NATR25 | 
275 | 
NATR25PP | 
275 | 
25 | 
52 | 
25 | 
24 | 
42 | 
19500 | 
36500 | 
13400 | 
23500 | 
3600 |

NATV25 | 
285 | 
ANTV25PP | 
285 | 
25 | 
52 | 
25 | 
24 | 
42 | 
29000 | 
69600 | 
19800 | 
40900 | 
2100 |

62 | 
NATR30 | 
470 | 
NATR30PP | 
470 | 
30 | 
62 | 
29 | 
28 | 
51 | 
31000 | 
57500 | 
20900 | 
35500 | 
2600 |

NATV30 | 
481 | 
NATV30PP | 
481 | 
30 | 
62 | 
29 | 
28 | 
51 | 
45500 | 
104000 | 
27800 | 
60900 | 
1700 |

72 | 
NATR35 | 
635 | 
NATR35PP | 
635 | 
35 | 
72 | 
29 | 
28 | 
58 | 
34500 | 
67500 | 
22500 | 
41000 | 
2000 |

NATV35 | 
647 | 
NATV34PP | 
647 | 
35 | 
72 | 
29 | 
28 | 
58 | 
50800 | 
109500 | 
30900 | 
70800 | 
1400 |

80 | 
NATR40 | 
805 | 
NATR40PP | 
805 | 
40 | 
80 | 
32 | 
30 | 
66 | 
47000 | 
91500 | 
30900 | 
56500 | 
1700 |

NATV40 | 
890 | 
NATV40PP | 
890 | 
40 | 
80 | 
32 | 
30 | 
66 | 
64000 | 
139000 | 
39800 | 
87800 | 
1300 |

85 | 
NATR45 | 
910 | 
NATR45PP | 
910 | 
45 | 
85 | 
32 | 
30 | 
72 | 
49100 | 
98000 | 
30600 | 
56900 | 
1500 |

90 | 
NATV50 | 
960 | 
ANTV50PP | 
960 | 
50 | 
90 | 
32 | 
30 | 
76 | 
50500 | 
10600 | 
30600 | 
57500 | 
1300 |

NATR50 | 
990 | 
NATR50PP | 
990 | 
50 | 
90 | 
32 | 
30 | 
76 | 
69500 | 
187000 | 
38700 | 
90900 | 
1000 |


NUTR type yoke type track rollers
NUTR series yoke type track roller is double row full roller bearing with retaining edge guiding outer ring.All the parts of the bearing are pressed into the sealing cage of outer ring forming a complete unit,the sealing cage,together with the thrust retaining ring form an efficient gap sealing.Very heavy load can be used on this yoke type track rollers.Even with very high speed,it can bear impact axle load due to its axle guidance of its rolling bodies.




Outside Diameter | 

Bearing Designation and mass approx | 

Boundary Dimensions | 
Basic load rating | 

Limiting Speed |


With IR | 

Mass | 
d | 
D | 
B | 
C | 
d1 | 
 Cr Dynamic | 
 Cor Static | 
 | 

Grease |

 Cw | 
Cow |

mm | 
g | 
mm | 
N | 
rpm |

35 | 
NUTR 15 | 
99 | 
15 | 
35 | 
19 | 
18 | 
20 | 
20500 | 
24500 | 
13900 | 
15300 | 
6500 |

40 | 
NUTR 17 | 
147 | 
17 | 
40 | 
21 | 
20 | 
22 | 
21800 | 
28500 | 
16500 | 
20500 | 
5500 |

42 | 
NUTR 15 42 | 
158 | 
15 | 
42 | 
19 | 
18 | 
20 | 
20500 | 
24500 | 
16800 | 
21800 | 
6500 |

47 | 
NUTR 17 47 | 
220 | 
17 | 
47 | 
21 | 
20 | 
22 | 
21800 | 
28500 | 
19000 | 
25000 | 
5500 |

NUTR 20 | 
245 | 
20 | 
47 | 
25 | 
24 | 
27 | 
36900 | 
48900 | 
26000 | 
33500 | 
4200 |

52 | 
NUTR 20 52 | 
321 | 
20 | 
52 | 
25 | 
24 | 
27 | 
36900 | 
48900 | 
29800 | 
39800 | 
4200 |

NUTR 25 | 
281 | 
25 | 
52 | 
25 | 
24 | 
31 | 
40800 | 
58500 | 
27500 | 
35000 | 
3400 |

62 | 
NUTR 25 62 | 
450 | 
25 | 
62 | 
25 | 
24 | 
31 | 
40800 | 
58500 | 
32500 | 
47800 | 
3400 |

NUTR 30 | 
465 | 
30 | 
62 | 
29 | 
28 | 
38 | 
56800 | 
77500 | 
39500 | 
49500 | 
2600 |

72 | 
NUTR 30 72 | 
697 | 
30 | 
72 | 
29 | 
28 | 
38 | 
56800 | 
77500 | 
46000 | 
62800 | 
2600 |

NUTR 35 | 
630 | 
35 | 
72 | 
29 | 
28 | 
44 | 
63000 | 
91000 | 
42500 | 
59000 | 
2100 |

80 | 
NUTR 35 80 | 
836 | 
35 | 
80 | 
29 | 
28 | 
44 | 
63000 | 
91000 | 
49500 | 
70500 | 
2100 |

NUTR 40 | 
816 | 
40 | 
80 | 
32 | 
30 | 
51 | 
87900 | 
108000 | 
54000 | 
73600 | 
1600 |

85 | 
NUTR 45 | 
883 | 
45 | 
85 | 
32 | 
30 | 
55 | 
93600 | 
119000 | 
54000 | 
77500 | 
1400 |

90 | 
NUTR 40 90 | 
1129 | 
40 | 
90 | 
32 | 
30 | 
51 | 
87900 | 
108000 | 
63800 | 
93600 | 
1600 |

NUTR 50 | 
950 | 
50 | 
90 | 
32 | 
30 | 
60 | 
98900 | 
140000 | 
55900 | 
79000 | 
1300 |

100 | 
NUTR 45 100 | 
1396 | 
45 | 
100 | 
32 | 
30 | 
55 | 
93600 | 
119000 | 
70500 | 
106000 | 
1400 |

110 | 
NUTR 50 110 | 
1690 | 
50 | 
110 | 
32 | 
30 | 
60 | 
98900 | 
140000 | 
73600 | 
118000 | 
1300 |




Bearing designation | 
Dimensions | 
Cr | 
Cor | 
weight |

ZZ | 
ZZUU | 
ZZR | 
ZZUUR | 
d | 
D | 
B | 
C | 
a | 
e | 
f | 
rsmin | 
N | 
N | 
g |

NAST6ZZ | 
NAST6ZZUU | 
NAST6ZZR | 
NAST6ZZUUR | 
 6 | 
19 | 
14 | 
13.8 | 
14 | 
2.5 | 
0.8 | 
0.3 | 
4120 | 
4550 | 
24.5 |

NAST8ZZ | 
NAST8ZZUU | 
NAST8ZZR | 
NAST8ZZUUR | 
 8 | 
24 | 
14 | 
13.8 | 
17.5 | 
2.5 | 
0.8 | 
0.6 | 
5680 | 
5890 | 
39 |
Die Anschrift:
Changhong West Road 182, Wujin District, Changzhou, Jiangsu, China
Unternehmensart:
Hersteller/Werk
Geschäftsbereich:
Auto, Motor und Zusatz, Industrielle Anlagen und Zusatzteile, Mineralien und Energie, Produktionsmaschinen, Werkzeug
Zertifizierung des Managementsystems:
ISO 9001
Firmenvorstellung:
Changzhou Lisongtai Industrial Motion Technology Co., Ltd, ist ein Hersteller spezialisiert auf die Herstellung von verschiedenen Einweglager, Einwegkupplung, Freilaufkupplung, Nadellager. Mehr als 2000 Standardmodell der Einweglager über 1000 Bezeichnungen von metrischen und Zoll-Serie Nadellager werden regelmäßig hergestellt und weit verbreitet für Motorräder, elektrische und luftbetriebene Werkzeuge, Drucker, Licht-und Textilindustrie, Maschinen, Baumaschinen, Autos LKW und Bürogeräte in nationalen und weltweiten Märkten verwendet. Darüber hinaus werden spezielle Lager entsprechend den Anforderungen der Kunden für verschiedene Anwendungen geliefert. Wir haben unsere Produkte nach Korea, Iran, Türkei, Bulgarien, Rumänien, Russland, Italien, Norwegen, USA, Kanada, Usw.
Was sind wir?
Unsere Fabrik wurde in der wirtschaftlich entwickelten Küstenstadt-Industriegebiet Wujin Changzhou Stadt der Provinz Jiangsu entfernt. Hier Transport ist bequem, Es wird nur eine Stunde nach Shanghai mit dem Zug.
Welche Hauptprodukte werden hergestellt?
Einweglager, Einwegkupplung, Freilaufkupplung, Rückanschläge, Nockenkupplung, Nadellager, Stützrollen- und Kurvenlager, Zylinderrollenlager. Axialkugellager mit Falt-Sitz. Wir haben große Bestände, und wir auch Accpect Herstellung für nicht-Standard-Produkt, Kunden Zeichnung oder Proben.
Was ist unser Vorteil?
Produkt: 1999 begann unser Chef als Ingenieur, Einwegkupplungslager zu entwickeln und zu entwerfen, als er in einer großen Lagerfabrik arbeitete. Bis jetzt haben wir Erfolge zu BB-Serie, MZ-Serie, TFS-Serie, NSS-Serie RSBW-Serie zu entwickeln, die bestätigt werden Reichweite in einem hohen Qualitätsniveau kann mit TSUBAKI Marke von Janpan verglichen werden.
Quliaty entspricht Stieber Kupplung, GMN Kupplung, Ringspann Kupplung, Formspag Kupplung, NSK Kupplung, ect.
Serie GFR, Serie DC, Serie ASNU, Serie NFR, Serie GFK, NF-Serie, AE-Serie, AA-Serie, ect, die bestätigt werden können, erreichen in einem hohen Qualitätsniveau kann mit STIEBER Marke aus Deutschland verglichen werden.
FE-Serie, FP-Serie, FND-Serie, FKN-Serie Einwegkupplungslager, die bestätigt werden, erreichen ein hohes Qualitätsniveau kann im Vergleich mit GMN Marke aus Deutschland.
Unseren Kunden weiterhin den höchsten Servicestandard in unserer Branche zu bieten. Wir wollen an der Spitze der Lagerversorgung und -Konstruktion bleiben und unsere Entwicklung in Richtung neuer Lager fortsetzen.
Fabrikausrüstung: Das Unternehmen besitzt die fortschrittlichste CNC automatische Produktionslinie, automatische Montagelinie und eine Vielzahl von Prüfgeräten. Die von uns hergestellten Lager sind alle geräuscharm, vibrationsarm, reibungsarm, hochpräzise, hochgekapselt, Hohe Drehgeschwindigkeit und lange Lebensdauer.
Qualitätskontrolle: 2011 Wir haben die Zertifizierung des Qualitätsmanagementsystems ISO9001: 2008 erhalten, alle unsere Produkte werden vor mehrmaler Inspektion verschickt. Wir liefern auch detaillierte Zeichnungen und bieten, wenn nötig.
Was ist die Anwendung?
Weit verbreitet in Fördermaschine, Reduzierstück, Hebezeug, Aufzug, Automobil, Haushaltsgeräte, Textilmaschinen, Druckmaschinen, Lebensmittelmaschinen und Minenmaschinen usw.
wo unsere Produkte versalzt wurden?
Unsere Produkte in der ganzen Welt spielen eine wichtige Rolle
in Deutschland, Großbritannien, den Niederlanden, Spanien, Italien,
In Indien, Indonesien, den Philippinen, Thailand,
im Iran, Dubai
in Mexiko,
in den Vereinigten Staaten
"Qualität und Service" müssen Ihre wichtigsten Anliegen, die wir in der Praxis umgesetzt haben, bitte durchsuchen Sie unsere Produktkategorie und lassen Sie uns Ihre Anfragen. Unser Ziel ist es, unsere Kunden mit guter Qualität und den besten wettbewerbsfähigen Preisen zu erfüllen. Mit ausreichender Versorgung, großen Vorrat und bequemen Transport, begrüßen wir herzlich neue Kunden, um uns zu besuchen.