CER Approved ISO Overesea Service Oil und Cylinder Dividing

• Modell Nr.: JLCJ
• Stoff : Aluminium
• Struktur : Kolben-Zylinder
• Power : Pneumatisch
• Standard : Standard
• Druckrichtung : Doppelt wirkende Zylinder

• Trademark: JULY
• Packing: Foam Inside, Carton Box /Wooden Box Outside
• Standard: CE/ ISO9001
• Origin: Donggua, China
• HS Code: 8412310090
• Production Capacity: 350sets/ Month

CE approved  ISO overesea service Oil and Cylinder Dividing

JLCJ Power stroke and approach stroke adjustable cylinder

Characters of pneumatic and hydraulic cylinder

1. Faster than hydraulic cylinder and more stable than pneumatic cylinder.

2. Easy to set up, adjust and maintain.

3. Can achieve the same high pressure output as those from hydraulic cylinder.

4. Power source is easy to obtain and more economic.

5. Operation with little noise.

6. Without high-temp problem caused by hydraulic cylinder.

This kind of cylinder can be used on sheet metal joining, punching/piercing, coining/marking/stamping,

Pressing/compressing/straightening, riveting/crimping/flaring, assembling/press-fitting/mounting,

Bending/edging, clamping/tensioning/peening, and so on.

This cylinder can be placed at any position, but the oil cylinder should be higher than the main

Cylinders.

Product detailed models information:

1) JLCJ-100-100--10E-10T

First 100 stands for the cylinder diameter, can be 80mm, 160MM, 180mm and 200MM.

Second 100 stands for the total stroke, can be: 50 MM and 150 MM, 200MM, 250MM.

10E stands for the power stroke, can be: 5MM, 10 MM, 20MM

10T stands for the outlet force, can be: 20 tons, 30tons, 40 tons and 60 tons...

For this type of hydro pneumatic cylinder, usually the air driven pressure should be not more

Than: 8 Bar, it is best to set up the compressed air pressure to be: 6 Bar.