Deyang Dongfang Zhuoyue Electrotechnical Equipment Co., Ltd.

Verseilmaschine, Ziehmaschine, führen Extrusionsmaschine Hersteller / Lieferant in China.

Startseite Unternehmensprofil Produktliste Kontakt Anfrage Senden
Startseite> Produktliste> Elektrikprodukt und Herstellungsgeräte> (LGZ-1500+255/15Y) Aluminiumzeile rod-Ccr schreiben

(LGZ-1500+255/15Y) Aluminiumzeile rod-Ccr schreiben

Referenz FOB Preis:
US $ 166153.00 / Set
MOQ: 1 Set
Zahlungsbedingungen: LC, T / T
Produktionskapazität: 2.5-5t/H
Verpackung: Plywood or Naked in Container


Basis Info
  • Modell Nr.: LGZ-1500+255/15Y type
  • Genauigkeit : Präzision
  • Bescheinigung : CE , ISO
  • Entformen : Automatisch
  • Heizsystem : Elektrisch
  • Funktion : Schmierung
  • Mould Leben : > 1.000.000 Schüsse
  • Automatischer Grad : Automatisch
  • Zustand : Neu
  • Kundenspezifische : Kundenspezifische
  • Garantie : 12 Monate
Zusätzliche Informationen..
  • Trademark: Dong Fang
  • Packing: Plywood or Naked in Container
  • Standard: CE, SGS, ISO
  • Origin: Deyang, Sichuan, China
  • HS Code: 8455213000
  • Production Capacity: 2.5-5t/H


LGZ-1500+255/15Y type aluminum rod continuous casting and rolling line
  The fourth generation aluminum rod continuous casting and rolling line optimized the equipment hardware, so that make sure the line runs long term and stably, reduces the running cost, has the advantages of economic, environmental protection and low carbon, and the produced rod has the best quality. The crystallizing wheel of the fourth generation casting machine adopts new material to strengthen the structure, which improves the life span of crystallizing wheel. Adopt horizontal casting to make the molten aluminum enter the crystallizing cavity stably, will not bring sinuous flow and turbulence, will prevent oxide film on the molten aluminum surface between the launder and middle ladle from being damaged, will lessen the re-inhale and re-oxidation of molten aluminum, so that improve the quality of aluminum rod. The fourth generation aluminum rod continuous casting and rolling line possesses the advantages of both aluminum alloy rod rolling machine and common aluminum rod rolling machine, improves the strengthen and the life span of easy-damaged parts; new type coiler adopts conic rolling wheel water drum type coiler system, needs not butter, which is economy, environmental protection and without pollution, also can be used to varnished wire and extruded tube directly.
1    application
The line is designed to produce aluminum rod by means of continuous casting and rolling, the material is pure aluminum ingot or electrolytic molten aluminum, and the produced rod diameters are9.5mm,12mm and 15mm.
2, composition
    Equipment name: LGZ-1500+255/15Y type aluminum rod continuous casting and rolling line.
   Main component: one set of two-wheel type casting machine, one set of rotating arm balance slinging type hydraulic shearer, one set of Y type continuous rolling mill with 15 rolling stands, one set of conic rolling wheel water drum type coiler (rod guiding device without oil), one set of emulsion circulating device, one set of lubricant circulating device, one set of electric control system. (Remark: aluminum melting furnace, holding furnace and launder should be ordered separately.)
3     Brief Technological process:
  Aluminum ingot→ molten aluminum→ molten aluminum refining→ sampling→ holding device→ filting→ casting→ cooling casting blank→ front blank shearing→ enter the rolling→ rolling → rod guiding without oil→ continuous rod winding→ dual-basket coiler→ bundle→ finished aluminum rod measuring→ check up→ warehousing.
   The melting aluminum or the molten aluminum, through the holding furnace and the launder get into wheel belt type continuous casting machine, continuous cast into 2450mm2 section M type aluminum ingot. Cut the useless ingot using hydraulic shearer, and then feed into the rolling machine and outlet rod, collect the rods in coil with dual baskets through guiding the rod without butter and winding the rod continuously.
4,  main technical parameter
4.1,:                                      9.5±0.2 mm,12mm,15mm
   Produced aluminum rod dia.                              9.5±0.2 mm,12mm,15mm
4.2,:                                           2.7-5.0 t/h
   Production capacity                                     2.7-5.0 t/h
4.3,:                           40×7.8×5.1 m()
   Main equipment dimension             40×7.8×5.1m (excludes furnace and cooling circulating system)
4.4,:                                       65 t
   Total weight of main equipment                              65t
4.5,:                                               350kw
   Total power                                              350kw

Deyang Dongfang Zhuoyue Electrotechnical Equipment Co., Ltd.
Sichuan , China
Konto Registrierte im Jahr : 2009
Geschäftsart : Hersteller/Fabrik, Handelsunternehmen, otro