Shenzhen Fn-Link Technology Limited

wifi- Modul, Wireless-Modul, wiFi -Dongle Hersteller / Lieferant in China, Bietet Qualität WIFI + BT4.0 2.4/5.8G, 1T1R, Combo SDIO Module (8821AS), 1T1R 802.11 b/b/n 2.4G SDIO Wi-FI Module (RTL8189), 802.11A /B/G/N/AC 2t2r USB2.0 Interface Wi-FI Module ... und so weiter.

Startseite Unternehmensprofil Produktliste Kontakt Anfrage Senden
Startseite> Produktliste> andere> 11n WiFi Module F89ESSM23-W1(RTL8189ES )

11n WiFi Module F89ESSM23-W1(RTL8189ES )

Referenz FOB Preis:
US $ 1.0- 9.0 / Stück
Zahlungsbedingungen: LC, T / T, D / P, PayPal
Produktionskapazität: 2000000PCS/Year
Verpackung: Blister

Produktbeschreibung

Basis Info
  • Modell Nr.: F89ESSM23-W1
  • Art : WiFi Modul
  • Arbeitsmodus : STA
  • WiFi Antennentyp : Extern
  • Übertragungsrate : 101-150Mbps
  • Spannung : 3,3 V
  • Farbe : Blau
  • Bescheinigung : ISO9001 , RoHS , FCC , CE
Zusätzliche Informationen..
  • Trademark: FN-LINK
  • Packing: Blister
  • Standard: CE, ROHS, FCC
  • Origin: Shenzhen
  • Production Capacity: 2000000PCS/Year
Produktbeschreibung

Product Specification

IEEE 802.11b/g/n 1T1R SDIO WiFi Module

1. Introduction

FN-8900M is a highly integrated and excellent performance Wireless LAN (WLAN) SDIO network interface device. High-speed wireless connection up to 150 Mbps .

1.1 Overview
The general hardware for the module is shown in Figure 1. This WLAN Module design is based on Realtek RTL8189ES. It is a highly integrated single-chip 1*1 MIMO (Multiple In Multiple Out) Wireless LAN (WLAN) SDIO network interface controller complying with the 802.11n specification. It combines a MAC, a 1T1R capable baseband, and RF in a single chip. It is designed to provide excellent performance with low power Consumption and enhance the advantages of robust system and cost-effective.


1.2 Specification Reference

This specification is based on additional references listed as below.
iEEE 802.11b
iEEE 802.11g
iEEE 802.11n

2. GENERAL SPECIFICATION

2.1 WiFi RF Specifications


Features

Descriptions

Main Chipset

Realtek RTL8189ES

Operating Frequency

2.400~2.4835GHz

Operating Voltage

3.3Vdc ±10% I/O supply voltage

Host Interface

SDIO/GSPI

WIFI Standard

WiFi:
IEEE 802.11b,
IEEE 802.11g,
IEEE 802.11n,

Modulation

WiFi:
802.11b: CCK(11, 5.5Mbps), QPSK(2Mbps), BPSK(1Mbps),
802.11 g/n: OFDM

PHY Data rates

WiFi:
802.11b: 11,5.5,2,1 Mbps
802.11g: 54,48,36,24,18,12,9,6 Mbps
802.11n: up to 150Mbps

Transmit Output Power

WiFi:
802.11b@11Mbps 16±2dBm
802.11g@6Mbps 14±2dBm
802.11g@54Mbps 14±2dBm
802.11n@65Mbps 13±2dBm (MCS 0_HT20)
13±2dBm (MCS 7_HT20)
13±2dBm (MCS 0_HT40)
13±2dBm (MCS 7_HT40)

EVM

802.11b /11Mbps : EVM<=-9dB
802.11g /54Mbps : EVM<=-25dB
802.11n /65Mbps : EVM<=-28dB

Receiver Sensitivity
(HT 20)

802.11b@8% PER
1Mbps -88±1dBm
2Mbps -87±1dBm
5.5Mbps -85±1dBm
11Mbps -82±1dBm

802.11g@10% PER
6Mbps -86±1dBm
9Mbps -85±1dBm
12Mbps -84±1dBm
18Mbps -82±1dBm
24Mbps -80±1dBm
36Mbps -77±1dBm
48Mbps -73±1dBm
54Mbps -71±1dBm

802.11n@10% PER
MCS 0 -83±1dBm
MCS 1 -82±1dBm
MCS 2 -80±1dBm
MCS 3 -78±1dBm
MCS 4 -75±1dBm
MCS 5 -71±1dBm
MCS 6 -69±1dBm
MCS 7 -67±1dBm

Operating Channel

WiFi 2.4GHz:
11: (Ch. 1-11) - United States(North America)
13: (Ch. 1-13) - Europe
14: (Ch. 1-14) - Japan

Media Access Control

WiFi: CSMA/CA with ACK

Network Architecture

WiFi: Ad-hoc mode (Peer-to-Peer )
Infrastructure mode
Software AP
WiFi Direct

Security

WiFi: WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit,

Antenna

External

OS Supported

Android /Linux/ Win CE /iOS /XP/WIN7

Dimension

Typical L14.00*W12.50*T2.00mm


2.2 Power Consumption

Mode

Status

Power(mW)

Note

OS
Windows XP

Link

3.3Vx70mA =231

20M

3.3Vx75 mA =248

40M

RX

3.3Vx75mA =248

20M

3.3Vx75 mA =248

40M

TX

3.3Vx100 mA =330

20M

3.3Vx110 mA=363

40M

Power save mode

3.3Vx20 mA =66

DTIM=100ms

Device Disable

3.3Vx25 mA =82.5


Radio Off

3.3Vx0 mA =0



3. Mechanical Specification

3.1 Outline Drawing

3.2 Specification of shielding case (unit: mm)

3.3 Connector Pin Definition


Pin #

Name

Description

1

SD_CMD

SDIO Command Input

2

SD_D3

SDIO Data Line 3

3

SD_D2

SDIO Data Line 2

4

SD_D1

SDIO Data Line 1

5

SD_D0

SDIO Data Line 0

6

SD_CLK

SDIO Clock Input

7

GND

POWER GND

8

GND

POWER GND

9

ANTENNA

RF OUT

10

WAKE

Wake Function

11

VDIOSDIO

SDIO Voltage 1.8V-3.3V

12

3.3

Power Supply

13

CS

PDn


3.4 Layout reference


4. Environmental Requirements

4.1 Operating& Storage Conditions

Operating

Temperature: 0°C to +55°C

Relative Humidity: 10-90% (non-condensing)

Storage

Temperature: -40°C to +80°C (non-operating)

Relative Humidity: 5-90% (non-condensing)

MTBF (Mean Time Between Failures)

Over 150,000hours


4.2 Recommended Reflow Profile
Referred to IPC/JEDEC standard.
Peak Temperature : <250°C
Number of Times : ≤2 times

4.3 Patch WIFI modules installed before the notice:
WIFI module installed note:
1. Please press 1 : 1 and then expand outward proportion to 0.7 mm, 0.12 mm thickness When open a stencil
2. Take and use the WIFI module, please insure the electrostatic protective measures.
3. Reflow soldering temperature should be according to the customer the main size of the products, such as the temperature set at 250 + 5 ºC for the MID motherboard.

About the module packaging, storage and use of matters needing attention are as follows:
1. The module of the reel and storage life of vacuum packing: 1). Shelf life: 8 months, storage environment conditions: temperature in: < 40 ºC, relative humidity: < 90% r.h.
2. The module vacuum packing once opened, time limit of the assembly:
Card: 1) check the humidity display value should be less than 30% (in blue), such as: 30% ~ 40% (pink), or greater than 40% (red) the module have been moisture absorption.
2.) factory environmental temperature humidity control: <= -30 ºC, <= 60% r.h..
3). Once opened, the workshop the preservation of life for 168 hours.
3. Once opened, such as when not used up within 168 hours:
1). The module must be again to remove the module moisture absorption.
2). The baking temperature: 125 ºC, 8 hours.
3). After baking, put the right amount of desiccant to seal packages.

Shenzhen Fn-Link Technology Limited
Guangdong , China
Konto Registrierte im Jahr : 2015
Geschäftsart : Hersteller/Fabrik

Produktliste