Dong Guan TongYi Plastics Machinery Co., Ltd.

Kunststoffindustrie Kühler, Kunststoff- Mixer, Gurtförderer Hersteller / Lieferant in China.

Startseite Unternehmensprofil Produktliste Kontakt Anfrage Senden
Startseite> Produktliste> Klimaanlage> Plastikspritzen-Abkühlen (TCO-15W)

Plastikspritzen-Abkühlen (TCO-15W)

MOQ: 1Stück
Produktionskapazität: 1000 PCS/Year
Verpackung: Shrinkage Film, Blister Film, Wooden Crate
HS-Code: 8418699090

Produktbeschreibung

Basis Info
  • Modell Nr.: TCO-15W
  • Kapazität : 12.000-15.000 BTU
  • Kühlen / Heizen : Nur Kühlen
Zusätzliche Informationen..
  • Trademark: TONGYI
  • Packing: Shrinkage Film, Blister Film, Wooden Crate
  • Origin: China
  • HS Code: 8418699090
  • Production Capacity: 1000 PCS/Year
Produktbeschreibung

SAFETY SYSTEM of the plastic injection molding cooling
1. Electric power lack-phase & reversed-phase protector and signal light in the the plastic injection molding cooling equipment
2. Master electric leakage switch in the plastic injection molding cooler
3. The plastic injection molding cooling equipment of Pump rolling back protector and signal light
4. Compressor rolling back protector and signal light in the air cooled chiller
5. Condensor high-voltage protector and signal light in the the plastic injection molding cooler
6. The plastic injection molding cooling equipment of compressor anti-ice protector
7. Compressor time-delay start safeguard
FEATURE:
1. Safe and noiseless imported compressor of high quality for efficient plastic injection molding cooling
2. Temperature controller to control the water temperature precisely between +5 degrees centigrade and +35 degrees centigrade for the plastic injection molding cooling
3. Unique condenser and evaporator design for excellent heat exchange
4. Protectors of current overload, high-low-voltage and delay to send out alarm and display the cause upon fault
5. Protector of electric power lack-phase & reversed-phase and anti-ice
6. Acid-basicity-resistant type upon demand
7. Increase surface smooth and gloss, decrease the wrinkle and internal stress, avoid shrinkage and distortion, speed up the plastic injection moulding

MODEL COOLING ABILITY BTU/KCAL COOLING POWER
KW
COOLING TUBE DIAMETER
FT
FREEZING TUBE DIAMETER
FT
PUMP POWER
KW
COOLING FLOW
L/MIN

DIMENSIONS
MM

WEIGHT
KG
TCO-15W 181300/46200 11 2" 2" 2.2 400 1400*1250*600 580