Clamshell Truck Side View Camera

Clamshell truck side view camera

Detailed Product Description

1) Truck side view camera
2) Special patent design
3) Only 120 degree view angle
4) Avoid scrach with barrier

Clamshell patent design truck side view camera--GREAT PRODUCTS FOR CARS, TRUCKS, RVs, BOATS AND VANS!

Especially Big mobile with long body!

Camera Special Features

Side View camera can be mounted on rear or either side of vehicles
Water-proof without extra housing and vandal proof: For part (camera glass lens) exposed to outside ONLY and for normal usage ONLY. Camera body and cables are not designed to be exposed to outside and must be properly sealed against moisture. Incorrect installation and using the product in opposition to the manufacturer's instructions MAY result in loosing water-proof feature.
1/4'' CMOS SENSOR
High resolution 380 TV Lines
Low illumination requirement 0.3 LUX
User adjust reverse/normal mirror image - can set to display a reversed camera image on the monitor (for vehicle rear viewing to the normal view seen in a rear-view mirror) OR a normal view on the monitor (for vehicle front viewing) - connect two-pin jumper connector to the mirror reverse wire to set for normal view
120 Degree Wide Angle View - Essential to get a wide picture view especially when backing up a towed vehicle or a vehicle with wide turning radius
Convenient angle adjustment
Multiple color options:
Standard RCA video output - When in need of replacement cables you can simply buy them off the shelves of any store selling video cables. There's no need to shop around for some "special type" of cable. The connectors are compatible with this product as they would be with any VCR, DVD player, TV, or Monitor.
Uses standard 12V DC power supply found in most land vehicles
Caution: The camera is designed to operate within a range of constantly changing voltage levels produced by a vehicle's battery and alternator (post engine ignition) under normal use conditions. Some vehicles have a very high momentary voltage at the vehicle starting time and the excessive voltage generation at that time might cause damage to the camera. If your vehicle tends to emit high voltage levels during ignition you will need to install a fuse/voltage regulator/etc. To protect your camera. Please consult with a professional vehicle audio/video equipment installers if needed.