Grundlegende Informationen.
Type
Extrusion Blow Molding Machine
Certification
CE, ISO9001:2008
Condition
New, Double Station
Temperature Control
Simens
Servo Valve&Servo Transducer
Rexroth
Transportpaket
Plastic Films, According to Customers′ Requi
Produktbeschreibung
Blow Molding Machine
Maximum Volume: 5 litter
Material: HDPE, PP, PVC, PETG etc.
View Stripe matchable
Easy operation
Automatically
1>Double station and single satation
2>Single mould head to six mould head
3>Mutli-layer with View Strip line
4> It can match auto-deflashing device, Leak detector, Chiller and crusher recycle system.
5> The daliy output(24 hours) can reach approximately from 5, 000 to 86, 000; It can produce from 0.2-5L plastic hollow bottle products.
A.Brief Introduction
DMK-L series are fully-automatic pet stretch-blow molding machines(preheat). It has 3 to 16 cavities and the maximum capacity of the products is 2000mL. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Automatization
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed:6000BPH(6-cavity), 8000BPH(8-cavity), 12000BPH(12-cavity), 16000BPH(16-cavity).
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
B.Settings:
a).PLC colour display: SIEMENS(GERMANY)
b).Pneumatic parts:FESTO(GERMANY)
c).Controller of preform transfer:Servo motor National(JAPAN)
d).Other electric parts are all world-famous brand
C.Machine Features:
C.1. Stable performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.
Standard Configuration |
PARISION CONTROL THICKNESS CONTROL | MOOG/GEFRAN | U.S.A/ITALY |
PLC | SIMENS | GERMANY |
TEMPERATURE CONTROL | SIMENS | GERMANY |
SERVO VALVE&SERVO TRANSDUCER | REXROTH | GERMANY |
MOTOR | SIMENS | GERMANY |
CONTACTOR | SIMENS | GERMANY |
PNEUMATIC VALVE | SMC | JAPAN |
HYDRAULIC VALVE | YUKEN | JAPAN |
HYDRAULIC MOTOR&SCREW MOTOR | SIMENS | GERMANY |
REDUCER | GUOMAO | CHINA |
1000L blow molding machine parameter |
No | | Specifications | 1000Liters |
| Layers of finished products | | 2-4layers |
| Material | | HDPE HMW |
1 | Extruders | Screw Diameter | 90-110mm |
Plasticinzing Capacity | 350-550kg/h |
L/D | 30:1 |
Gear Box Type | Hard surface |
Extruder Drive Motor | 45/45/55/55 |
Heating power | 55-75kw |
Max Screw Speed | 60RPM |
2 | Accumulator Die Head | Accumulator capacity | 45L |
Heating power | 75KW |
Max. parison weight | 35KG |
3 | Moulding Clamping Unit | Clamping platen size | 1600*1500mm |
Max mold size | 1400*1600mm |
Mould Clamping Force | 800KN |
Mould Thickness | 950-1350mm |
4 | Stretching and Blowing Unit | Spreading stroke | 400-800mm |
5 | Electrical Control Panel | Thickness controller | 100or300points |
Main Operation Panel | Siemens |
6 | Hydraulic System | Oil Tank Capacity | 1100L |
7 | Weight of Machine | | 38T |
Size of Machine | [L*W*H](M) | 9m*4.5m*5.2m |
8 | Total power | | 325kw |
Average power Consumption | | 180kw |
2000L blow molding machine parameter |
No | | Specifications | 2000Liters |
| Layers of finished products | | 2-4layers |
| Material | | HDPE HMW |
1 | Extruders | Screw Diameter | 90-110mm |
Plasticinzing Capacity | 380-490KG/h |
L/D | 30:1 |
Gear Box Type | Hard surface |
Extruder Drive Motor | 55/55/55/75/75 |
Heating power | 55-75kw |
Max Screw Speed | 60RPM |
2 | Accumulator Die Head | Accumulator capacity | 80L |
Heating power | 85KW |
Max. parison weight | 54KG |
3 | Moulding Clamping Unit | Clamping platen size | 1700*1800mm |
Max mold size | 1600*1900mm |
Mould Clamping Force | 1800-2000KN |
Mould Thickness | 1000-1700mm |
4 | Stretching and Blowing Unit | Spreading stroke | 400-900mm |
5 | Electrical Control Panel | Thickness controller | 100-300points |
Main Operation Panel | Siemens |
6 | Hydraulic System | Oil Tank Capacity | 1200L |
7 | Weight of Machine | | 45T |
Size of Machine | [L*W*H](M) | 11m*4.5m*6.2m |
8 | Total power | | 425kw |
Average power Consumption | | 210kw |
3000L blow molding machine parameter |
No | | Specifications | 3000Liters |
| Layers of finished products | | 2-4layers |
| Material | | HDPE HMW |
1 | Extruders | Screw Diameter | 100/100/100/110mm |
Plasticinzing Capacity | 550-580kg/h |
L/D | 32:1 |
Gear Box Type | Hard surface |
Extruder Drive Motor | 90kw |
Heating power | 110kw |
Max Screw Speed | 60RPM |
2 | Accumulator Die Head | Accumulator capacity | 110L |
Inverter | Siemens |
Max. parison weight | 85KG |
3 | Moulding Clamping Unit | Clamping platen size | 2100*2200mm |
Max mold size | 1900*2300mm |
Mould Clamping Force | 2500KN |
Mould Thickness | 1000-2200mm |
4 | Electrical Control Panel | Thickness controller | 100-300points |
Main Operation Panel | Siemens |
5 | Hydraulic System | Oil Tank Capacity | 1200L |
6 | Weight of Machine | | 63T |
Size of Machine | [L*W*H](M) | 12m*4.5m*7.2m |
7 | Total power | kw | 465kw |
Average power Consumption | kw | 245kw |
5000L blow molding machine parameter |
No | | Specifications | 5000Liters |
| Layers of finished products | | 2-4layers |
| Material | | HDPE HMW |
1 | Extruders | Screw Diameter | 100/100/100/100mm |
Plasticinzing Capacity | 950kg/h |
L/D | 32:1 |
Gear Box Type | Hard surface |
Extruder Drive Motor | 135kw |
Heating power | 125kw |
Max Screw Speed | 50RPM |
2 | Accumulator Die Head | Accumulator capacity | 180L |
Inverter | Siemens |
Heating power | 120KW |
Max. parison weight | 170KG |
3 | Moulding Clamping Unit | Clamping platen size | 2500*2700mm |
Max mold size | 2350*2800mm |
Mould Clamping Force | 3600KN |
Mould Thickness | 1500-2000mm |
4 | Stretching and Blowing Unit | Spreading stroke | 400-1200mm |
5 | Electrical Control Panel | Thickness controller | 100or300points |
Main Operation Panel | Siemens |
6 | Hydraulic System | Oil Tank Capacity | 1500L*2 |
7 | Weight of Machine | | 140T |
Size of Machine | [L*W*H](M) | 15m*13m*8.5m |
8 | Total power | | 575kw |
Average power Consumption | | 285kw |
Die Anschrift:
Bozhou Road, Zhongyun Industrial Park, Jiaozhou, Qingdao, Shandong, China
Unternehmensart:
Hersteller/Werk
Geschäftsbereich:
Produktionsmaschinen
Zertifizierung des Managementsystems:
ISO 9001
Firmenvorstellung:
Qingdao Yifeng Zhongrun Plastic Machinery Co., Ltd ist in der Herstellung von High-Tech-Kunststoffmaschinen beschäftigt, die Integration von R & D, Herstellung, Vertrieb und Service.
Nach jahrelangen ständigen Bemühungen hat unser Unternehmen reiche Erfahrung in Design und Herstellung gesammelt. Mit fortschrittlichen Produktionsanlagen, Technologie, strengen Qualitätsgarantien, wissenschaftlichen Managementmethoden und schnellen und effizienten Dienstleistungen entwickeln wir viele neue Produkte, um die Bedürfnisse der Anwender zu erfüllen. Wir haben auch die unabhängigen Import- und Exportrechte. Wir haben unsere Produkte in viele Länder und Regionen der Welt exportiert, wie Osteuropa, Russland, Südafrika, Korea und den MITTLEREN Osten.
Wir produzieren hauptsächlich Kunststoff-Rohr Extrusionslinie, Kunststoff-Board Extrusionslinie, Kunststoff-Blatt Produktionslinie, Kunststoff-Schaumplatte Produktionslinie, Kunststoff recyceln und Granulierung Einheit, Kunststoff Extrusion, Kunststoff extrudieren sterben und 1000L Wassertank Blasformmaschinen, 2000Lwater Tank Blasformmaschinen, 3000L Wassertank Blasformmaschine, 5000L Wassertank Blasformmaschine, 10000L Wassertank Blasmaschinen.
Unser Unternehmen befindet sich in der schönen Küstenstadt Qingdao. Von unserer Firma aus sind es nur eine halbe Stunde Fahrt zum Flughafen Qingdao und zum Hafen Qingdao. So ist es sehr bequem für den Import und Export hier.
Wir heißen alle Freunde herzlich willkommen, unsere Fabrik zu besuchen. Wir sind bereit, Ihnen wettbewerbsfähigen Preis, ausgezeichnete Qualitätsprodukte, gute After-Sales-Service, und wir glauben auch, dass wir beide gute Freunde und gewinnen gute Vorteile.