Composite Bright Outrigger Mat Crane Foot Support Plate Stabilizer Pad
Composite Bright Outrigger Mat Crane Foot Support Plate Stabilizer Pad
for Cranes and Trucks provide the same safety and stability afforded to heavy industry to your own recreational vehicle. They are made of the same UHMW engineering plastic as our larger pads and provide exceptional stability. All it takes is the failure of one wooden pad to cause very expensive damage to your RV or even worse, possible injury.
- Lightweight, 1/7th The Weight Of Steel
- Withstands Loads Up To 3000 psi
- Retains Its Physical Properties To -80°c
- Will Not Corrode, Rot, Or Rust
- High Impact & Wear Resistance
- Can Withstand Over 1,000,000 Lbs Of Compressive Load
- Rope Handles Included
- Custom Sizes and Shapes Available
Upgrades are Available Including:
- SAFETY TEXTURING - Non Slip Varieties Available (please email us)
- CUSTOM Sizes and Shapes Available
- Anti-Slip Varieties
ABOSN Composite Bright Outrigger Mat Crane Foot Support Plate Stabilizer Pad for Cranes and Trucks provide a super strong, rigid and easy to use foundation for a wide variety of outrigger enabled equipment. Constructed of engineered thermoplastic material, with a crush rating up to 750 psi and maximum allowable load ratings up to 300,000 lbs., ABOSN Composite Bright Outrigger Mat Crane Foot Support Plate Stabilizer Pad for Cranes and Trucks deliver the strength, stiffness and reliability you can trust.
1. Different surface -Composite Bright Outrigger Mat Crane Foot Support Plate Stabilizer Pad
A Smooth Surface B Circle in Middle C Rhombus pattern in surface D Anti-slip Surface
2. Handle -Composite Bright Outrigger Mat Crane Foot Support Plate Stabilizer Pad
A : With nylon rope and rubber sleeve B : With hole holder on top C : With Steel Chain
3. Shape -Composite Bright Outrigger Mat Crane Foot Support Plate Stabilizer Pad
A : Square shape B:Round shape
Advantages of Composite Bright Outrigger Mat Crane Foot Support Plate Stabilizer Pad
--Highest abrasion resistance of any polymer, 6 times more abrasion resistant than steel
--Do not absorb moisture and will not swell up over time due to exposure outdoors.
--Good impact intensity,Do not lose their impact strength over time.
--Good breaking elongation,so they will bend but not break under extreme loads.
--Non-stick surface, easy to clean.
--Corrosion and chemical resistant.
--Noise- absorption, Vibration-absorption
--Super compression strength
--15 Percent the weight of steel pads and easier to handle
--Compressive loads up to one million pounds
--Up to 15,000 pounds per square foot
--Non-Conductive
--Non-Toxic and smell
Applications
ABOSN Composite Bright Outrigger Mat Crane Foot Support Plate Stabilizer Pad for Cranes and Trucks put under the support-leg Truck Crane, Crawler Crane, Rough Crane, Boom Pump, Concrete Pump, Fire Truck, Utility Truck, Tree Trimmer, Any type of Aerial Equipment and so on, for making the machine work safely.
What Size Outrigger Pad Do You Need?
ABOSN Composite Bright Outrigger Mat Crane Foot Support Plate Stabilizer Pad for Cranes and Trucks are available in three categories; Medium Duty (1.0″ thick), Heavy Duty (2.0″ thick) and Super Duty (3.0″ and 4.0″ thick) and are designed for equipment typically up to 100 tons in capacity.
As the thickness of a ABOSN Composite Bright Outrigger Mat Crane Foot Support Plate Stabilizer Pad for Cranes and Trucks increases it has a greater ability to distribute higher loads over the ground.
The size and thickness of the Composite Bright Outrigger Mat Crane Foot Support Plate Stabilizer Pad for Cranes and Trucks you need depends on your equipment type/specifications and the soil bearing capacity.
Composite Bright Outrigger Mat Crane Foot Support Plate Stabilizer Pad for Cranes and Trucks Size & Load Capacity
| Dimensions(mm) Round |
Weight(kg) |
Vertical Jack Capacity (tonne) |
45° Load(tonnes) |
| 400*400*40 |
6.14 |
30 |
18 |
| 500*500*25 |
6.00 |
27 |
16 |
| 500*500*50 |
12.00 |
35 |
22 |
| 600*600*50 |
17.28 |
35 |
22 |
| 800*800*60 |
36.86 |
45 |
25 |
| 1000*1000*100 |
96.00 |
80 |
40 |
Composite Bright Outrigger Mat Crane Foot Support Plate Stabilizer Pad for Cranes and Trucks Techinal Data Sheet
| Property: |
Test Method (Standard) |
Ticona GUI4152 |
Ticona GUI4150,4120 |
Unit |
| Molecular weight |
|
3-5 million |
3-5 million |
|
| Density |
ISO 1183-1:2012/DIN53479 |
0.92-0.98 |
0.93-0.98 |
g/cm³ |
| Compression strength |
ISO 604:2002 |
≥30 |
≥32 |
Mpa |
| Tensile strength |
ISO527-2:2012 |
≥20 |
≥22 |
Mpa |
| Elongation at break |
ISO527-2:2012 |
≥300 |
≥300 |
% |
| Dynamic Friction coefficient |
ASTM D 1894/GB10006-88 |
≤0.20 |
≤0.18 |
|
| Dynamic Friction coefficient |
ASTM D 1894/GB10006-88 |
≤0.20 |
≤0.18 |
|
| Notched impact strength (Charpy) |
ISO179-1:2010/GB/T 1043.1-2008 |
≥100 |
≥100 |
kJ/m2 |
| Abrasion wear index |
ES-X60210-2008 |
≤30 |
≤30 |
mg |
| Vicat softing point |
ISO306:2004 |
≥80 |
≥80 |
°C |
| Hardness shore-D |
ISO 868:2003 |
60-65 |
61-66 |
D |
Our Services
The largest factory in China about UHMWPE blocks crane outrigger jack base pads mobile outrigger pad, 8 workshops, 12 sets CNC machines, all kinds of certification and industry standards could be met. In addition, we could provide the best after-sale service, 24 hours online for you!
Company Information
ABOSN (Qingdao) New Plastic Product Co Ltd is one of the largest Engineering Plastic products manufacture in China.All the stuff in our company are dedicated to producing satisfying products and developing new products for our customer.
We have gained many certificates from government and professional fields .We have a wide variety of products, mainly including all kinds of UHMW-PE Fender Pad ,UHMW-PE Sheet ,HDPE Sheet ,PP Sheet ,Urethane Sheet ,PVC sheet and other Engineering plastic products. |
Our products are widely applied on electric fields ,wharf and port ,mining ,chemical plant and so on which bring a lot of social benefits and economic benefits .Now they are popular all over the world.
We always share the things "Quality first, Customer first ,keeping improving " to win more benefits for our customer.
In order to achieving rapid and sustainable development, we are willing to establish a wide and deep cooperation relation with enterprises both home and abroad.
Our Company and Workshops
We are the factory and have the strict QC standard and professional packing and loading container capacity. |
The good feedbacks from clients
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? Is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance, balance before shippment.
Geprüfter Lieferant 
