Dh-S80 Swing Gate

Swing Gate is an upgraded products from tripod turnstile. It has standard electrical interface which can be connected with ID cards, IC cards, magnetic cards, barcode cards etc.The integration system ensures passing in order and will never allow unauthorized persons to go in or go out.



Features:

1. Problem-self-checking function.
2. Many options of working ways: Bi-direction card reading; One direction card reading and another no reading; One direction card reading and another freely. And single direction photocell controlled passing and close. Working ways can be set in the control panel.
3. When power off, arm open automatically and power on again, arm will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to close from 1-60s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger not pass within regulated time period, full-height turnstile will cancel this passing right. And the regulated time period for passing can be set by managers.
6. If passenger pass without card read or valid card read, flap barrier will alarm untill passenger get back from the flap barrier and then take a valid card to be read for passing.
7. Flap barrier is with 485 interface for long-distrance control concern.
8. Anti-rush function: If there is no open single, arm will be holding tightly.
9. Double anti-clipping function: Photocell anti-clipping and mechanical anti-clipping. When passenger is going through the flap barrier, photocell will detect out this situation and will not close. After passenger passed, arm will close automatically. During its reposition, if arm meets any obstacle, arm will get back automatcially or stop working for a while with very slight force. Also it will alarm.
10.It is with standard electrical interface for the integration of various readers and writers.
11. Swing gate can count how many passenger has passed and will show it in the LED display.
12. Direction display to guide passenger which direction is to go.
13. Card-reading with memory or without memory function.
14. Swing Gate can control the population inside in the control of software.
15. Stable running with little noise



Specifications:
Power Supply: AC220V± 10V, 50Hz / AC110V± 10V, 60Hz
Power Consumption: 100W/24V
Temperature: -30 to 70 degrees
Humidity: < 95%, without concretion
Passage Width: 500-600mm
Passing Speed: 30 persons/min (normal open), 20 persons/min (normal close)
Arm Open/Close Time: 1s
Input Interface: +12V electrical signal or impulse signal with width more than 100ms, drive current >10mA
Communication Interface: RS485 (Distance: < =1200m)
Material: Housing - 304 stainless steel Arm - Plexiglass
Dimension: 1000*300*980mm
Arm Length: 260mm
Weight: 60kg
Working Environment: Indoors or outdoors with shed
Arm Turning: Single direction or Bi-direction