Umfassender Sechs-Phasen-Relaisprüfer für Strominjektionsanwendungen

• Anpassung: Verfügbar
• Kundendienst: Der Ingenieur steht für die Inbetriebnahme auf See zur Verfügung
• Garantie: 1 Jahre
• Modell Nr.: PRT-PC6
• Max Durchmesser der Werkstück: entfällt
• Massenumfang Werkstück: entfällt
• Art: Prüfgerät für Sekundärstrom-Injektion
• MAXCAPACITY: entfällt
• Genauigkeitsklasse: entfällt
• Last Way: Elektronische Last
• Ladeverfahren: Dynamische Last
• Anzeige: Digital
• Steuerung: Computersteuerung
• Gewicht: 0-100 kg
• Energiequelle: AC220V
• Ölzylinder Position: entfällt
• Elementname: prt-pc6 Prüfgerät für Sekundärstrom-Injektion
• Anwendung: Prüfparameter des Sechsphasenschutzrelais
• Funktionen: china machte niedrigen Preis sekundäre Injektionstester
• wechselstrombereich: 6*30A
• Max. Ausgangsleistung von 6 Phasen in Paralle: 900VA
• ac-Spannungsausgang: 6*125V
• Netzspannungsausgang: 0~250V
• Schalter Eingangsklemmen: 8 Paare
• Zeitmessbereich: 1ms-9999s
• Größe: 455*530*220mm
• Stromversorgung: 220V, 50Hz
• Transportpaket: Verpackt in Furniergehäuse
• Spezifikation: Siehe technische Daten
• Warenzeichen: delta
• Herkunft: China
• HS-Code: 9031809090
• Produktionskapazität: 100 Sätze/Monat

Produktbeschreibung

RPT-PC6 Multi-Functional Six Phase Protection Relay Testing Secondary Current Injection Tester

Description:
RPT-PC6 Multi-Functional Six Phase Protection Relay Testing Secondary Current Injection Tester with standard 6 phase voltage and 6 phase current output, voltage 125V/phase, current 30A/phase, 6 phases in parallel can up to 180A.
With digital Signal Processor Microcomputer, it can not only test the traditional relays and protectors but also can test the modern microcomputer relays, especially for transformer differential protection and transfer equipment testing.

Features:
Classic Windows XP operating interface, 8.4 inch resolution of 800*600 TFT true color display.
Equipped with ultra-thin industrial keyboard and optical mouse, complete a variety of operations using keyboard or mouse the same as ordinary PC.
The main control board is DSP + FPGA architecture, 16 bit DAC output, generates high - density sine wave 2000 points each circle to fundamental wave, which greatly improve the wave quality and the accuracy of the test instrument.
Using high-fidelity linear amplifier. Both to ensure the accuracy of a low current, but also guarantee the stability of the high current.
USB directly connect with PC, without any adapter cable, easy to use.
Can be connected to a laptop computer (optional). Laptop computers and industrial machines use the same software, no need to re-learn the methods of operation.
With a separate DC auxiliary voltage source, output voltage 110V(1A),220V(0.6A), provides relays or protective devices which require DC power.
The software with self-calibrating function, which avoid to calibrate accuracy by adjusting relays after open the case, greatly improve the stability of the accuracy.

Functions:
RPT-PC6 Secondary Current Injection Tester is suitable for following relays and protection devices testing:

Relay test	Microprocessor-based protection device line protection	Generator transformer protection	Others
Signal relay	Multi-stage over-current	Differential protection	Automatic synchronizing device
Time relay	Over (less) voltage	Field loss protection	Protection device
Intermediate relay	Sequence components voltage and current	Excitation protection	Bus bar differential protection
Reclosing relay	Frequency devices	Composite voltage locking ( direction) over-current (Reserve)	Fiber-optic lines differential protection
Current relay	Power directional protection
Over (less) voltage relay	Reclosing and conversion failure
Sequence component relay	Distance and zero sequence
Synchronism-check (or phase comparison) relay	Power frequency variation distance
Extremely inverse current relay	Composite voltage
Differential relay	Locking (direction) current
Power (direction) relay	Low cycle, low voltage load shedding device
Impedance relay
Synchronous relay
Frequency relay

Parameters:

No.	Item Name	RPT-PC6 Secondary Current Injection Tester
1	AC current source
	Current range	6x (0~30A)/phase
	Current accuracy	0.5%
	6 phase parallel current output	180A
	Phase current working value for allowed long time	10A
	Power	300VA/phase
	Max. output power of 6 phases in parallel	900VA
	Max. permitted work time of 6 phases in parallel	10S
	Frequency range	0~1000Hz; accuracy: 0.001Hz
2	DC current source
	Current range	20A / phase
	power	300VA/phase
	accuracy	0.5%
3	AC voltage source
	Phase voltage output	6x( 0~125V)/phase
	accuracy	0.5%
	Line voltage output	0~250V
	Phase voltage / Line voltage output power	70VA / 100VA
	Frequency range	0~1000Hz
	Frequency accuracy	0.001Hz
4	DC voltage source
	Phase voltage output range	0~±150V
	accuracy	0.5%
	Line voltage output range	0~±300V
	Phase voltage / Line voltage output power	90VA / 180VA
5	Switch terminal
	Switch input terminals	8 pairs
	Dead contact	1-20mA, 24V ac
	Potential flip	-6V DC low level                           15-250V DC high level
	Switch output terminals	4 pairs, dead contact, rupturing capacity: 110V/2A, 220V/1A
6	Time measurement range
	Range	1ms-9999s
	Accuracy	1ms
7	Dimension & weight
	Dimension	455 (mm)×530 (mm)×220 (mm)
	Weight	30kg
8	Power	AC220V±10%, 50Hz, 15A