Standard oder Nonstandard: | Standard |
---|---|
Achsloch: | 5-45 |
Drehmoment: | 3-100 |
Bohrungsdurchmesser: | 5-45 |
Geschwindigkeit: | 10000 |
Struktur: | Flexibel |
Lieferanten mit verifizierten Geschäftslizenzen
GWTS-82X128.1 einstufige Kupplung mit drei Membranen aus Aluminiumlegierung |
Modellparameter | Gemeinsamer Bohrungsdurchmesser D1 | Gemeinsamer Bohrungsdurchmesser D2 | ΦD | ΦN | L | LF1 | LF | S | LP | D3 | M | Anzugsmoment der Schraube (N.M) |
||
Kleinste | Maximal | Kleinste | Maximal | |||||||||||
GWTS-34x55,9 | 5 | 12 | 5 | 15 | 34 | 21,6 | 55,9 | 12,15 | 14,25 | 3,5 | 9,5 | Φ16 | M3 | 1,5 |
GWTS-39x65,9 | 6 | 15 | 6 | 19 | 39 | 25 | 65,9 | 15,15 | 14,9 | 4,5 | 11,15 | Φ19 | M4 | 2,5 |
GWTS-44x65,9 | 6 | 18 | 6 | 22 | 44 | 29,6 | 65,9 | 15,15 | 14,9 | 4,5 | 11,15 | Φ22.5 | M4 | 2,5 |
GWTS-56x83,1 | 8 | 24 | 8 | 32 | 56 | 38 | 83,1 | 19,9 | 19,75 | 5,5 | 13,45 | Φ32.5 | M5 | 7 |
GWTS-68x97.6 | 10 | 30 | 10 | 38 | 68 | 46 | 97,6 | 24 | 23,35 | 6,3 | 15,65 | Φ38.3 | M6 | 12 |
GWTS-82x128.1 | 16 | 38 | 16 | 45 | 82 | 56 | 128,1 | 30,15 | 30 | 8 | 21,95 | Φ45 | M8 | 20 |
Modellparameter | Nenndrehmoment (N.M)* |
Zulässige Exzentrizität (Mm)* |
Zulässiger Ablenkwinkel ()* |
Zulässige axiale Abweichung (Mm)* |
Maximale Geschwindigkeit U/min |
Statische Torsionssteifigkeit (N.M/Rad) |
Trägheitsmoment (Kg.m2) |
Material der Wellenhülse | Material von Schrapnel | Oberflächenbehandlung | Gewicht (G) |
GWTS-34x55,9 | 3 | 0,02 | 1 | ±0,20 | 10000 | 2000 | 6,01 x 10-5 | Hochfeste Aluminiumlegierung | S U S 3 0 4 Federstahl | Eloxierung | 78 |
GWTS-39x65,9 | 6 | 0,02 | 1 | ±0,25 | 10000 | 4500 | 1,49 x 10-5 | 140 | |||
GWTS-44x65,9 | 9 | 0,02 | 1 | ±0,30 | 10000 | 5200 | 2,25 x 10-5 | 184 | |||
GWTS-56x83,1 | 25 | 0,02 | 1 | ±0,40 | 10000 | 11000 | 7,23 x 10-5 | 355 | |||
GWTS-68x97.6 | 60 | 0,02 | 1 | ±0,45 | 10000 | 19000 | 2,0 x 10-4 | 620 | |||
GWTS-82x128.1 | 100 | 0,02 | 1 | ±0,55 | 10000 | 22000 | 5,95x10-4 | 1200 |
Lieferanten mit verifizierten Geschäftslizenzen