Lieferanten mit verifizierten Geschäftslizenzen
Geprüfter Lieferant Good Quality Full Automatic Small Industrial Incubator Power by Solar
Basic Infomation Of Small Industrial Incubator Power by Solar
Brand name: HB poultry hatchery
Hatching Rate: 95%
Warranty: 3 years
Lifetime: 10-12 years
Function: Full automatic poultry hatchery
Certification: CE And SGS
Material: Color steel plate
Color: White and blue
Characteristic of Small Industrial Incubator Power by Solar
To meet farmer's requirements in incubator, we produce a new model named incubator hatcher.
It could put egg tray and hatching basket.
During 18 incubation days, you put trays in the incubator hatcher, at the last hatching 3 days, changing egg tray to hatching basket.
| Appearance | Steel Plate with stainless steel corner cover |
| Temperature display range | 0-99°C |
| Temperature measurement accuracy |
±0.1°C |
| Temperature control accuracy | ≤±0.1°C |
| Humidity display range | 0-99%RH |
| Humidity precision control | ±5%RH |
| Output current | Temperature Control 220V 10A, the other 200V 1A |
| Over egg cycle | 0.1--99.9hour(Factory settings 1.5hour) |
| Eggs over time | 1-255 seconds adjustable (factory set to 180 seconds) |
| Doubled the number of eggs | Maximum record 999 times |
| Ventilation cycle | 5-999 minutes (adjustable, factory 0 hours, non-ventilation) |
How to use Small Industrial Incubator Power by Solar
1.The incubator usd AC 220V / 50HZ voltage work.In order to ensure the safety of use, require qualified electricians to install. Must be added leakage protection switch and voltage regulator in the front of the power supply. And must be connected to ground effectively
2.Power on 5 minutes --- Open the door breathable 2 minutes --- Close the door 10 minutes --- Open the door breathable 2 minutes --- close the door warming
3.Add warm water to the basin to prevent the humidification tube dry, burning basin, the water level need higher than the surface of the humidifying tube 2 ~ 3 cm without overflow basin. Use a correct thermometer and the machine's temperature sensor tied together, put into the machine.
4.efore putting eggs into incubator, hold down the "UP" button and not let it go, Untile the egg trays is level or forward oblique, easy to enter.
5.Clean and disinfect the inside of the machine with 0.2% potassium permanganate solution. Egg trays soaked in disinfectant to disinfection. Egg need disinfection as to conditions.After disinfection, put the big side of the eggs on the egg tray, preheated at room temperature for 2 to 4 hours, let the embryo adapt to temperature changes. The best time to put eggs into machine is part.
Safety Notices of Small Industrial Incubator Power by Solar
1. Incubator machine need be put in a dedicated brick room, prohibited put in the breeding homes and staff often move around the area!
2. Non-electrician credentials are strictly prohibited wiring installation!
3.Do not dry basin without water
4. No hatching experience staff operating this machine alone!
5. The grounding wire should install according to the standard method, each machine should be equipped with leakage protection switch
6..Before putting eggs into incubator machine, need disinfection the egg trays and inside the machine.
7.Temperature sensor placed in the upper part of the machine, humidity sensor placed in the lower
8.After each hatching patch, egg tray, egg rack, the inside of the machine should be disinfected, uniform fan need do lubrication (plus lubricating oil.) Should check the machine internal circuit whether damage or not!
Lieferanten mit verifizierten Geschäftslizenzen
Geprüfter Lieferant 
