Lieferanten mit verifizierten Geschäftslizenzen
Geprüfter Lieferant The AP28N13B01 is an outdoor wireless access point that uses the 802.11AC wireless network standard and operates in the 2.4GHz/5.8GHz ISM wireless frequency band. It can meet the demand for high-speed wireless internet access for up to 64 concurrent users. It has a 100Mbps network interface, supports 24V PoE remote power supply and 12V DC local power supply. In 2.4GHz 802.11n mode, it can support up to 300Mbps, and in 5.8GHz 802.11ac mode, it can support up to 867Mbps. The overall wireless speed can reach 1200Mbps.
It features high performance, high power, high gain, high receive sensitivity, high bandwidth, and low latency. It not only covers a wider range but also provides higher wireless transmission performance and stability. The IP65-rated outdoor protective housing design ensures resistance to wind, rain, dust, and sunlight, making it suitable for outdoor environments with extreme temperatures. Equipped with two external 5dBi omni-directional outdoor antennas, it supports pole or wall mount installation, making it an excellent choice for wireless access in outdoor settings such as scenic areas, mountainous regions, and streets.
1) MediaTek offers cost-effective wireless chips with industrial standard circuitry and resistance to high and low temperatures. The enhanced heat dissipation and optimized airflow prevent overheating issues, ensuring real-time, long-term, stable, and efficient transmission of user network data, thereby enhancing the user experience.
2) It supports the 802.11a/b/g/n/ac protocols and provides wireless access speeds of 300Mbps on the 2.4GHz band and 867Mbps on the 5GHz band, offering a total wireless access speed of 1200Mbps.
3) Equipped with an external dedicated WiFi RF power amplifier chip, it ensures wider signal coverage, higher rates, and longer transmission distances.
4) It supports 24V PoE remote power supply and 12V/1A local DC power supply, providing flexible power options suitable for wireless engineering scenarios with inconvenient power supply, thereby reducing construction costs.
5) It comes with an external threaded SMA standard connector and includes a bonus outdoor 5dBi omni-directional antenna. Users can also flexibly match it with other 2.4GHz/5.8GHz dual-band antennas based on different usage environments.
6) It features a stylish and space-saving design and supports wall mount or pole mount installation, offering flexibility in installation. It significantly reduces construction difficulty and improves construction efficiency without affecting the original design.
7) It is continuously updated with new features and performance enhancements to adapt to various network environments, ensuring an enhanced user experience.
|
Hardware specifications |
|
|
Main Chip |
MT7628AN+MT7613BEN |
|
Frequency |
580MHz |
|
Memory |
128MB |
|
Flash |
16MB |
|
Wireless Technology |
802.11b/g/n 2T2R MIMO technology (theoretical maximum speed of up to 300Mbps) 802.11a/n/ac 2T2R MIMO technology (theoretical maximum speed of up to 867Mbps) |
|
Device Interfaces |
WAN PoE*1/LAN*1 10/100Mbps adaptive DC power supply interface, suitable for power plug with outer diameter of 5.5mm, inner diameter of 2.1mm, and length of at least 9.5mm. RP-SMA external threaded and internal pin connectors *2 |
|
Buttons |
Reset button for factory reset (long press for 6 seconds to reset) |
|
Indicators |
PWR,LAN/WAN,LAN,WLAN*4 |
|
Antennas |
External 2.4G 5dBi outdoor omnidirectional rubber rod antenna *2 |
|
Power |
24V/0.5A PoE power supply,DC 12V/1A |
|
Operating/Storage Temperature |
-40ºC~55ºC/ -50ºC~70ºC |
|
Operating/Storage Humidity |
10%~90%(non-condensing) / 5%~90%(non-condensing) |
|
Dimensions |
15.5*8.5*3CM(Excluding antennas, antenna length is 15.5cm) |
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: Sample needs 1-3 working days, mass production time needs 3-5 weeks based on order quantity.
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available.
Q4. Do your products meet our standards?
A: Yes, almost all our products have CE,ROHS,FCC,etc.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application. Secondly We quote according to your requirements or our suggestions.Thirdly customer confirms the samples and places deposit for formal order. Then we arrange the production.
Lieferanten mit verifizierten Geschäftslizenzen
Geprüfter Lieferant 
