Grundlegende Informationen.
Modell Nr.
350kW, 500kW, 700kW, 1000kW,1200kW, 1400kW, 2000kW
Installation
Verpackt Boiler
Medien
Organischen Wärmeübertragungsmaterial
Wasserkreislauf
Naturumlauf
Drum Placement
Horizontale Boiler
Brennende Stil
Kammer Verbrennungskessel
Product
Thermal Oil Boiler Heater
Boiler Fuel
Natural Gas, City Gas, Diesel, Heavy Oil
Medium
Organic Heat Transfer Material
Thermal Capaicty
30,000 Kcal/Hr to 2,000,000 Kcal/Hr
Highest Work Temperature
320c
Application
Asphalt Plant, Bitumen, Plastic and Rubber Factory
Warenzeichen
Jinzhen Boiler
Transportpaket
Wooden Package
Spezifikation
120-20000KW
Produktbeschreibung
Heat Conduction Oil Furnace, Thermal Oil Boiler For Latex Nitrile Glove Factory
Product Description
thermic Fluid Heater, thermal oil boiler, hot oil boiler
thermal capacity: 350kw-1400KW
Working pressure:0.8-1.0 MPA
Outlet temperature:320 C
Available fuel:natural gas, coke oven gas, bio-gas,liquefied petroleum gas, diesel, heavy oil, light oil, crude oil
Available industries:Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries
YYW series oil fired thermal oil boiler designed with three passes coiled tubes, the tail heat surface form the wet back type smoke-transfer chamber structure, to improve heat efficiency. large access door design of boiler's front and rear panel,hammer paint coating, which makes the inspection convenient,elegant outside.
Working Principle Of Thermic Fluid Heater
Oil-fired thermal oil boilers have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.
Thermal Oil Boiler (Heater) System
This thermic fluid heater has advanced program control system, equipped with liquid level controller , pressure controller, temperature controller, and alarms to make sure the boiler work orderly and safe. So it is a kind of safe boiler with high efficiency and low power consumption.
Its advantage is Free-Installation
The complete boiler system is well skid-mounted on the basement, also we have done the pipe(valves) connection and wire connection. After receiving the boiler, user no need to do installation, just filling the thermal fluid oil, join the fuel and electricity. Entire boiler system is portable.
Product Parameters
Model No. | Thermal power(kcal/h) | Heating efficiency (%) | Max. working temp.(ºC) | Medium circulation(M3/H) | Transport size (mm) | Weight (Kg) |
YY(Q)W-120Y(Q) | 10*104 | ≥92.26 | 340 | 12.5 | Φ1060*2045 | 1215 |
YY(Q)W-240Y(Q) | 20*104 | ≥92.26 | 340 | 18 | Φ1020*1980 | 1355 |
YY(Q)W-350Y(Q) | 30*104 | ≥92.26 | 340 | 30 | Φ1212*2310 | 1590 |
YY(Q)W-500Y(Q) | 40*104 | ≥92.26 | 340 | 30 | Φ1212*2730 | 1680 |
YY(Q)W-700Y(Q) | 60*104 | ≥92.26 | 340 | 60 | Φ1400*3410 | 2715 |
YY(Q)W-900Y(Q) | 80*104 | ≥92.26 | 340 | 80 | Φ1616*3400 | 3142 |
YY(Q)W-1200Y(Q) | 100*104 | ≥92.26 | 340 | 100 | Φ1616*4000 | 3660 |
YY(Q)W-1400Y(Q) | 120*104 | ≥92.26 | 340 | 100 | Φ1820*4905 | 5420 |
YY(Q)W-2000Y(Q) | 160*104 | ≥92.26 | 340 | 100 | Φ1840*4950 | 7850 |
YY(Q)W-2400Y(Q) | 200*104 | ≥92.26 | 340 | 160 | Φ2060*4700 | 8850 |
YY(Q)W-3000Y(Q) | 250*104 | ≥92.26 | 340 | 180 | Φ2060*5450 | 9210 |
YY(Q)W-3500Y(Q) | 300*104 | ≥92.26 | 340 | 200 | Φ2430*5965 | 9960 |
YY(Q)W-4100Y(Q) | 350*104 | ≥92.26 | 340 | 250 | Φ2630*6990 | 1120 |
YY(Q)W-4700Y(Q) | 400*104 | ≥92.26 | 340 | 250 | Φ2830*7100 | 1230 |
Technical Advantage
Characteristics of heat-conducting oil boiler
1. The seal between the burner interface and the tube plate adopts a labyrinth type, which has good sealing performance and large expansion space, which prolongs the service life of the burner and improves the thermal efficiency.
2. The thermic fluid heater adopts two-coil structure, three-pass flue gas, compact design, saving space, adding air preheater, and thermal efficiency up to 92% or more.
3. Various operation safety protections make the boiler operation safer and simpler, with high temperature control accuracy (±1ºC) and good combustion effect.
4. The automatic control function is adopted to prolong the service life of the equipment while saving human resources.
5. Hot Oil Boiler can obtain a higher working temperature under a lower operating pressure, and has the technical characteristics of low pressure and high temperature.
6. It has complete operation control and safety monitoring devices, easy to operate, safe and reliable.
7. It can realize stable heating and precise temperature adjustment to meet different requirements
8. The thermal oil boiler has good thermal insulation, adopts high-efficiency thermal insulation materials and advanced construction technology, and has low heat dissipation loss on the furnace wall
Detailed Photos
Application
Owing to its characteristics of high heating temperature, low working pressure, and energy saving, the oil fired thermal fluid heater could be widely used in a variety of industrial heating process.
1) Textile industry - dyeing machine, drying rooms, high temperature machine, resin setting machine.
2) Food industry - cooking, drying, vegetable oil refining.
3) Chemical industry - oil chemistry, polymer industry, reaction tanks, distillation, concentration.
4) Plastics industry - plastics fired, extruded shape.
5) Rubber industry - hot press, hot extent, extrusion, vulcanization molding, injection, etc.
6) Paper industry - drying, corrugated paper processing, calender, glue roller.
7) Wood industry - hot processing, heat setting.
8) Machinery industry - drying, assembly processing
9) Building materials industry - plasterboard drying, asphalt heating, emulsified asphalt, asphalt concrete, concrete component maintenance, etc.
10)Synthetic fiber industry: polymerization, melting, spinning, extension, dry
FAQ
1.What are the heat-resistance temperature of grate and furnace?
The heat resistance temperature of grate is related to the grate material, the highest temperature could be as high as 1100ºC, and the lower temperature could be 700ºC.
The highest heat resistance temperature of furnace could be about 1700ºC~1800ºC.
2.What is conduction oil/ hot oil / heat transfer fluid?
Conduction oil has a high boiling point, it usually used for the industries that need the temperature of 150~350ºC, to instead of steam. The hot oil has the advantages of high transfer efficiency, fast heat transfer, and good thermal stability.
3.What about the delivery?
We have shipping agent can choosing the cheapest and fastest delivery. FOB,CIF, C&F or EXW are no problem for us.
4.What about the maintenance?
I will offer you the timely maintenance way sheet after installation of the boiler mainly parts.
5. What's your main product?
Our main product scope:
1.Fire tube series Horizontal oil/gas fired boilers (0.5-30T/H, 0.7-21MW)
2.Water tube series Horizontal Oil/gas fired boiler (4- 35T/H )
3.Vertical fire tube series Vertical Oil/gas fired boiler (0.1-2 T/H, 0.06-0.7MW )
4.Large drum chain grate new type water fire tube boilers (1-35T/H, 0.7-29MW)
5. Double drum chain grate series water tube biomass boilers (4-35T/H, 1.4-29MW)
6. Electric boiler boiler ( 10--50 T/H)
7.Oil/Gas fired thermal oil boiler
8.Coal fired thermal oil boiler heater
Die Anschrift:
No. 49, East Jinshui Road, Zhengzhou, Henan, China
Unternehmensart:
Handelsunternehmen
Geschäftsbereich:
Produktionsmaschinen
Zertifizierung des Managementsystems:
ISO 9000, ISO 14001, IATF16949
Firmenvorstellung:
Henan Jinzhen Industry Co., Ltd ist professionelle Altreifen Recycling-Maschine und Dampfkessel Lieferant in China, Wer ist spezialisiert auf die Forschung von Altreifen Öl Pyrolyse Anlage, Schrott Reifen zu Öl Pyrolyse Maschine, Abfall Kunststoff Pyrolyse Anlage, Gummi Pyrolyse Maschine, Altöl Destillationsmaschine, Pyrolyse Öl Destillationsanlage, Altöl zu Diesel-Maschine, Altöl zu Diesel-Maschine, Dampfkessel, Thermoöl-Kessel. Es wird Abfälle Gummi, Abfälle Kunststoffe und Altöl als Rohstoffe für Heizöl und Diesel zu produzieren.
Unsere Firma wurde 2019 gegründet, und unsere Fabrik hat eine langjährige Geschichte in der Maschinenindustrie. Das Hotel liegt in der Nähe des Hafens von Qingdao und bietet einen bequemen Transport zu Wasser und Land. Die Fabrik befindet sich im Bezirk Weibin, Stadt Xinxiang, Provinz Henan, China. Die Fabrik umfasst 12, 000 Quadratmeter. Es verfügt über eine umfassende Stärke in der Produktentwicklung, Herstellung und Vertrieb.
Jinzhen Machinery beschäftigt mehr als 125 Arbeiter; durch die Bemühungen unserer gesamten Mitarbeiter, haben wir ein B Maschinenhersteller geworden. Wir haben uns ständig bemüht, die Produktqualität zu verbessern und dabei deutsche und japanische Technologie einzuführen. Darüber hinaus verwenden wir die deutsche ultra verschleißfeste Farbe der Spitzenklasse, was unserem Unternehmen gute technische Möglichkeiten gibt. Unsere jährliche Produktionskapazität beträgt Export 8 Millionen des letzten Jahres.
Das Unternehmen hat die Zertifizierung ISO9001: 2008, CE, BV und Qualitätsmanagementsystem bestanden. Unsere Produkte werden im in- und Ausland gut verkauft. Hauptkunden sind Polen, Spanien, Griechenland, Philippinen, Malaysia, Vietnam, Laos, Kambodscha, Myanmar, Südafrika, Ghana, Nigeria, Sambia usw.