Grundlegende Informationen.
Modell Nr.
Radial Oriented Ferrite Ring Magnet
Certification
RoHS, CE, ISO9001, Ts16949
Magnetocrystalline Anisotropy
Anisotropic Magnet
Application
Industrial Magnet, Motor Magnet
Ferrite Magnet
Ceramic Magnet
Warenzeichen
Linlee Magnet
Transportpaket
Paper Carton+Wood Case
Spezifikation
Radial Oriented Ferrite Ring
Produktbeschreibung
Radial Oriented ferrite ring Magnet for electronic idle speed motor and other stepper motor rotors :
Specification of Radial Oriented ferrite ring Magnet :
Ferrite or ceramic magnets are still the most widely used magnets with a maximum energy product of 1 to ± 4.3 MGOe.
Due to the environmental requirements which are becoming more stringent barium ferrite has been replaced bystrontium ferrite during the last years.
Ferrite is the cheapest magnetic material and has a high corrosion resistance making coating unnecessary.
This magnetic material is hard and fragile and must be processed with diamond, preferably when it is not in a magnetic state.
Because it might shrink during the sinter process a tolerance of ± 2 % should be taken into account when determining the dimensions. If grinded ± 0.1 mm.
Tighter tolerance is available on request.
Ferrite magnets can be supplied both isotropically and anisotropically, they are used in the most divergent products such as loudspeakers, magnetrons, measuring devices, toys, engines, reed contacts etc.
The maximum temperature of use is 225°C depending on the specification, dimensions and system design.
For specifications: See the table below.
The minimum dimension for block magnets is 2 x 2 x 2 mm, whereas the maximum dimension for this type is 270 x 90 x 25.4 mm.
The minimum dimension for disc magnets is D 2 x 1 mm, whereas the maximum dimension for this type is D 156 x 25.
The minimum dimension for ring magnets is D8 x 2.5 x 3 mm, whereas the maximum dimension for this type is D 256 x D* x 25 mm (* inside diameter in consultation).
Follow size we have mold:
P/N | OD | ID | H |
---|
211 | 24 | 18 | 18.2 |
221 | 29.972 | 19.8374 | 30.734 |
222 | 34 | 24 | 24.5 |
223 | 13.985 | 9 | 13 |
225 | 79.25 | 66.55 | 21.59 |
226 | 38.7 | 15.8 | 35 |
227 | 53.7 | 34.7 | 24 |
228 | 19 | (6.5-6) | 25 |
229 | 12.192 | 7.366 | 12.344 |
230 | 36.6 | 8 | 21 |
231 | 36.6 | 8 | 21 |
232 | 38.7 | 15.8 | 25 |
Chinese Standard |
Material | Br | Hcb | Hcj | (BH)max |
mT | KGs | KA/m | KOe | KA/m | KOe | KJ/m3 | MGOe |
Y10T | 200~235 | 2.0~2.35 | 125~160 | 1.57~2.01 | 210~280 | 2.64~3.52 | 6.5~9.5 | 0.8~1.2 |
Y20 | 320~380 | 3.2~3.8 | 135~190 | 1.70~2.38 | 140~195 | 1.76~2.45 | 18.0~22.0 | 2.3~2.8 |
Y22H | 310~360 | 3.1~3.6 | 220~250 | 2.77~3.14 | 280~320 | 3.52~4.02 | 20.0~24.0 | 2.5~3.0 |
Y23 | 320~370 | 3.2~3.7 | 170~190 | 2.14~2.38 | 190~230 | 2.39~2.89 | 20.0~25.5 | 2.5~3.2 |
Y25 | 360~380 | 3.6~4.0 | 135~170 | 1.70~2.14 | 140~200 | 1.76~2.51 | 22.5~28.0 | 2.8~3.5 |
Y26H | 360~390 | 3.6~3.9 | 220~250 | 2.77~3.14 | 225~255 | 2.83~3.21 | 23.0~28.0 | 2.9~3.5 |
Y27H | 370~400 | 3.7~4.0 | 205~250 | 2.58~3.14 | 210~255 | 2.64~3.21 | 25.0~29.0 | 3.1~3.7 |
Y30 | 370~400 | 3.7~4.0 | 175~210 | 2.20~2.64 | 180~220 | 2.26~2.77 | 26.0~30.0 | 3.3~3.8 |
Y30BH | 380~390 | 3.8~3.90 | 223~235 | 2.80~2.95 | 231~245 | 2.90~3.08 | 27.0~30.0 | 3.4~3.7 |
Y30-1 | 380~400 | 3.8~4.0 | 230~275 | 2.89~3.46 | 235~290 | 2.95~3.65 | 27.0~32.0 | 3.4~4.0 |
Y30H-2 | 395~415 | 3.95~4.15 | 275~300 | 3.46~3.77 | 310~335 | 3.90~4.21 | 28.5~32.5 | 3.5~4.0 |
Y32 | 400~420 | 4.0~4.2 | 160~190 | 2.01~2.38 | 165~195 | 2.07~2.45 | 30.0~33.5 | 3.8~4.2 |
Y33 | 410~430 | 4.1~4.3 | 220~250 | 2.77~3.14 | 225~255 | 2.83~3.21 | 31.5~35.0 | 4.0~4.4 |
Y35 | 400~410 | 4.00~4.10 | 175~195 | 2.20~2.45 | 180~200 | 2.26~2.51 | 30.0~32.0 | 3.8~4.0 |
USA Standard |
Material | Br | Hcb | Hcj | (BH)max |
mT | KGs | KA/m | KOe | KA/m | KOe | KJ/m3 | MGOe |
C1 | 230 | 2.3 | 148 | 1.86 | 258 | 3.5 | 8.36 | 1.05 |
C5 | 380 | 3.8 | 191 | 2.4 | 199 | 2.5 | 27 | 3.4 |
C7 | 340 | 3.4 | 258 | 3.23 | 318 | 4.00 | 21.9 | 2.75 |
C8(=C8A) | 385 | 3.85 | 235 | 2.95 | 242 | 3.05 | 27.8 | 3.5 |
C8B | 420 | 4.2 | 232 | 2.913 | 236 | 2.96 | 32.8 | 4.12 |
C9 | 380 | 3.8 | 280 | 3.516 | 320 | 4.01 | 26.4 | 3.32 |
C10 | 400 | 4.0 | 288 | 3.617 | 280 | 3.51 | 30.4 | 3.82 |
C11 | 430 | 4.3 | 200 | 2.512 | 204 | 2.56 | 34.4 | 4.32 |
Europe Standard The standard from International Electronics Committee (IEC404-8-1) O×100=Y10T=C1 ×300=Y30=C5 O×330=Y30 BH |
Grade | Allowed Value (min-typical) |
Br | Hcb | BrHcj | (BH)max |
mT | KGs | KA/m | KOe | KA/m | KOe | KJ/m3 | MGOe |
HF8/22 | 200-220 | 2.00-2.20 | 125-140 | 1.57-1.76 | 220-230 | 2.76-2.89 | 6.5-6.8 | 0.8-1.1 |
HF20/19 | 320-333 | 3.20-3.33 | 170-190 | 2.14-2.39 | 190-200 | 2.39-2.51 | 20.0-21.0 | 2.5-2.7 |
HF20/28 | 310-325 | 3.10-3.25 | 220-230 | 2.76-2.89 | 280-290 | 3.52-3.64 | 20.0-21.0 | 2.5-2.7 |
HF22/30 | 350-365 | 3.50-3.65 | 255-265 | 3.20-3.33 | 290-300 | 3.64-3.77 | 22.0-23.5 | 2.8-3.0 |
HF24/16 | 350-365 | 3.50-3.65 | 155-175 | 1.95-2.20 | 160-180 | 2.01-2.26 | 24.0-25.5 | 3.0-3.2 |
HF24/23 | 350-365 | 3.50-3.65 | 220-230 | 2.76-2.89 | 230-240 | 2.89-3.01 | 24.0-25.5 | 3.0-3.2 |
HF24/35 | 360-370 | 3.60-3.70 | 260-270 | 3.27-3.39 | 350-360 | 4.40-4.52 | 24.0-25.5 | 3.0-3.2 |
HF26/16 | 370-380 | 3.70-3.80 | 155-175 | 1.95-2.20 | 160-180 | 2.01-2.26 | 26.0-27.0 | 3.2-3.4 |
HF26/18 | 370-380 | 3.70-3.80 | 175-190 | 2.20-2.39 | 180-190 | 2.26-2.39 | 26.0-27.0 | 3.3-3.4 |
HF26/24 | 370-380 | 3.70-3.80 | 230-240 | 2.89-3.01 | 240-250 | 3.01-3.14 | 26.0-27.0 | 3.3-3.4 |
HF26/26 | 370-380 | 3.70-3.80 | 230-240 | 2.89-3.01 | 260-270 | 3.27-3.39 | 26.0-27.0 | 3.3-3.4 |
HF26/30 | 385-395 | 3.85-3.95 | 260-270 | 3.27-3.39 | 300-310 | 3.77-3.89 | 26.0-27.0 | 3.3-3.4 |
HF28/26 | 385-395 | 3.85-3.95 | 250-265 | 3.14-3.33 | 260-275 | 3.27-3.45 | 28.0-30.0 | 3.5-3.8 |
HF28/28 | 385-395 | 3.85-3.95 | 260-270 | 3.27-3.39 | 280-290 | 3.50-3.60 | 28.0-30.0 | 3.5-3.8 |
HF30/26 | 395-405 | 3.95-4.05 | 250-260 | 3.14-3.33 | 260-270 | 3.27-3.39 | 30.0-31.5 | 3.8-3.9 |
HF32/17 | 410-420 | 4.10-4.20 | 160-180 | 2.01-2.26 | 165-175 | 2.07-2.20 | 32.0-33.0 | 4.0-4.1 |
HF32/22 | 410-420 | 4.10-4.20 | 215-225 | 2.70-2.83 | 220-230 | 2.76-2.89 | 32.0-33.0 | 4.0-4.1 |
HF32/25 | 410-420 | 4.10-4.20 | 240-250 | 3.01-3.14 | 250-260 | 3.14-3.27 | 32.0-33.0 | 4.0-4.1 |
Die Anschrift:
Rm. 813-14, Liuting Star Bldg., No. 22, Lane 299, Cangsong Road, Ningbo, Zhejiang, China
Unternehmensart:
Hersteller/Werk, Handelsunternehmen
Geschäftsbereich:
Mineralien und Energie
Zertifizierung des Managementsystems:
ISO 9001, IATF16949
Firmenvorstellung:
Ningbo Linlee Magnet Co., Ltd, gegründet im Jahr 1990, befindet sich in der industriellen Entwicklung Bereich Ningbo City, Zhejiang Provinz. Es ist nahe zum Beilun Hafen im Osten, im Süden ist es nahe zum Lishe Flughafen Ningbo, es ist sehr bequem, hier zu gelangen.
Wir haben das Zertifikat von ISO9001 im Jahr 2005, die Qualifikation der "Technology Enterprise of ZHEJIANG PROVINCE" ausgezeichnet. 2013, zertifiziert durch das Managementsystem der ISO/TS16949, ISO14001.
Wir sind ein bekannter Hersteller und Lieferant aller Arten von Permanentmagneten, einschließlich Gummimagnet, Sintered NdFeB Magnet, Bonded NdFeB, Injection Ferrit Magnete, Hartferrit-Magnet, AlNiCo, SmCo und magnetische Baugruppen.
Unsere Rubber Magnet Division kann 1250mm Breite Gummimagnet produzieren. Unsere Elektromotorleiste ist in guter Qualität bekannt. Unsere Produktionskapazität beträgt 10 000ton pro Jahr. Alle Produkte entsprechen der EU-Richtlinie 2002/95/EG RoHS und der anschließenden Änderung der Richtlinie 2005/618/EG und der Spielzeugnorm EN71-3.
Wir investieren eine Werkstatt für Bonded Magnet 2002 können wir für Ihre Bonded Magnete mit Welle und Kunststoffteil montieren. Wir arbeiten mit Auto Motor Parts Fabrik und Sensor Fabrik immer. Unser Enginner kann Ihnen bei der Auswahl der richtigen Materialprodukte für Injection NdFeB, Injection Ferrit, Compressing Mold NdFeB und Bonded SmCo helfen. Wir haben 200 Tonnen Injektion und gebundene Magnetkapazität.
Unsere größte Unternehmenseinheit ist gesintert NdFeB Magnete. Darunter extrem hohe Qualität wie N52, N50M, N48H, N45SH, N42UH, N40EH, N33AH usw.
Unsere Kunden wie BAKKER, CBK, GREE, GEELY und etc.
Unsere Magnete werden hauptsächlich auf Motoren und Generatoren, wie Elevator Motors, Wind Power Generators, Servo Motors, Linear Motors, Hybrid Electric Vehicle, Kompressormotoren und so weiter. Unsere Magnete sind auch weit verbreitet in Maschinen, Audio / Video und Kommunikationsgeräte, Medizinprodukte, Büroautomation, Magnettrenner, etc.
Herzlich willkommen zu unserer Fabrik zu besuchen.