Grundlegende Informationen.
Produktbeschreibung
Function: The function of this product is to measure the total flux of drinking water passing through the water pipe, meanwhile control the transmission and switch as required or pre-set.
Characteristic: The product of this series is sealed with liquid and the signal is transmitted by dry reed pipes or Hall components.
The ball-valve is driven by the electrical motor. Each time when the ball valve turns 90 degrees, there will be slight movement and switch signal will be transmitted.
Water meter and ball valve are integral parts. Transmission parts and electrical motors for speed decreasing are all well protected by high-density plastic covers that are strong and nice-looking.
Application condition:
Water Temperature is equal to or less than 40C. (If water temperature is equal to or less than 90C, additional specification is needed to be listed. )
Water Pressure is equal to or less than 1Mpa
Do not dip in water.
Working voltage for Electric Motor is 3-5V
Working voltage for Electric Motor is equal to or less then 200mA
To make sure the ball-valve work reliably in long time, the control system for the circuit should be switched on and off more than once a month.
Type of Signal:
The signal is transmitted by dry reed pipes or hall components.
The maximum error allowed:
The maximum error allowed for the low zone including the minimum flux(Qmin), with an exception of separating flux(qt) is ± 5%
The maximum error allowed for the high zone from the flux(qt)to over-load flux(QS) is ± 2%.
Installation Requirement:
The water meter must be installed in horizontal level with reading side upward and arrow direction must be the same as water current direction.
The water meter must be installed in a dry environment and be convenient for disassembly and maintenance. It is suggested that the water meter be installed in a box specially designed for water meter.
Water pipeline needed to be washed or cleaned before the installation of water meter.
Main Technical Parameters:
Die Anschrift:
No.68 Tonghe East Road Zhenhai District, Ningbo, Zhejiang, China
Unternehmensart:
Hersteller/Werk
Geschäftsbereich:
Messinstrumente
Firmenvorstellung:
Unsere Firma ist eine Niederlassung von Ningbo Amico Investment Corporation, die in der Produktion von Wasserzählern, Durchflussmesser und Remote-Wasserzähler, Meter Lesesysteme, IC-Karte Wasserzähler, Wärmezähler Serie der Produktentwicklung, Produktion und Vermarktung spezialisiert. Das Unternehmen Jahresumsatz mehr als 100 Millionen Einheiten, wurden wir China berühmte Marke und Produkt Befreiung und bewertet bekannte Marke in der inländischen und anderen Auszeichnungen.