| Anpassung: | Verfügbar |
|---|---|
| Kundendienst: | 1 Jahre |
| Garantie: | 1 Jahre |
|
Noch unentschlossen? Holen Sie sich Muster für $ !
Muster anfordern
|
Lieferanten mit verifizierten Geschäftslizenzen
Geprüfter Lieferant Von einer unabhängigen externen Prüfstelle geprüft
1. The PF series of paste putty filling machine is designed special for medium and high viscosity materials filling,if the raw materials could flow by its gravity,then the user does not need to prepare the paste putty transporting pump.But if the paste is hard to move, like solid state auto repair body putty or epoxy resin mortar,etc, the filling machine should be equipped with a high viscosity transporting pump.
2.Types:
According to filling range, there are 300-1000g model,1-5kg model and 5-25kg model.
According to filling heads quantity, there are single head filling machine and double heads filling machine.
3.Working principle:
Put the barrel manually, automatically fill in raw materials, then manually push the barrel to the capping machine, it will automatically sense the cap and press it,at last automatically push the barrel to the waiting area.
Take the 1-5kg filling machine for an example:
| 1 | Full Chinese man-machine interface operation display | |
| 2 | Number keys to directly input, or change parameters | |
| 3 | Instant job running status indication and clock display | |
| 4 | Tare detection starts all-round barrel filling | |
| 5 | Gross weight/net weight (automatic tare per barrel) and other filling methods | |
| 6 | Automatic zero tracking, bucket quantity accumulation | |
| 7 | Automatic weight error correction | |
| 8 | Automatic reset when booting, power-off protection device | |
| 9 | Emergency stop protection device | |
| 10 | Built-in fault detection function | |
| 11 | Linkage control output | |
| 12 | The filling slot can be adjusted up and down 200-380mm | |
| 13 | 1950X850X1500mm; L type: 1200mm long |
|
| 14 | Installed weight; about 150KG | |
| 15 | Filling specifications: 1-5KG, filling speed 3-8 barrels/min | |
| 16 | Filling value: ±0.02g (related to the specific gravity and pressure of the incoming material) | |
| 17 | Graduation value: 1g/5g (related to incoming material viscosity and pressure) | |
| 18 | Power supply: single-phase AC220V/50HZ, P=100w | |
| 19 | Air source: 0.5mpa±0.1Mpa Air consumption 5m3/h 8 | |
| 20 | Weighing range≯10KG | |
| 21 | Temperature range: -10°C~+45°C (ambient temperature) |
|
| 22 | Relative humidity: <95% (use environment) | |
| 23 | Material interface: open, according to the interface standard provided by the user | |
| 24 | Material inlet pressure: no pressure |
