Grundlegende Informationen.
Automatischer Grad
Automatisch
Bicycle Tyre Production Line
We Guarantee 2 Years.
Advantage
Higher Efficiency and Lo
Easy Operation
Maintainance
High Strength
Long Service Life
Manufacturer Sell
We Offer Lifetime
Produktbeschreibung
bale cutter of motorcycle Tyre production line1).Vertical Rubber Cutter: Parameter :
Model | XQL-80 | XQL-160 |
Motor power(kw) | 5.5 | 7.5 |
Rated cut-off force(kn) | 80 | 160 |
Cutting width(mm) | 690 | 790 |
Cutting stroke(mm) | 680 | 700 |
Working oil pressure(Mpa) | 8 | 5 |
Overall size(L×W×H)(mm) | 2200×1000×2500 | 2500×1000×2500 |
Weight(kg) | 1000 | 1200 |
2). Mixing Mill machine/55L : Parameter :
Model | Unit | X(S)N-35×30 | X(S)N-55×30 | X(S)N-75×30 |
Total volume of kneading chamber | L | 75 | 125 | 180 |
Working volume of mixing chamber | L | 35 | 55 | 75 |
Driving motor power | KW | 55 | 75 | 110 |
Tilting motor power | KW | 2.2 | 2.2 | 2.2 |
Tilting angle | | 140° | 140° | 140° |
Rotational speed of the rotor(front/rear) | r/min | 30/24.5 | 30/24.5 | 30/24.5 |
Working pressure of compressed air | Mpa | 0.5-0.8 | 0.6-0.8 | 0.6-0.8 |
Capacity of compressed air | m³/min | ≥0.9 | ≥1.0 | ≥1.0 |
Pressure of cooling water(rubber mixing) | Mpa | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 |
Pressure of heated steam(plastics mixing) | Mpa | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 |
Overall dimensions | L | mm | 3200 | 3360 | 3760 |
W | mm | 1900 | 1950 | 2143 |
H | mm | 2945 | 3050 | 3135 |
Weight | KG | 6500 | 7200 | 10000 |
Specifications1. The mixing chamber is of drilled structure with quick and better beating /cooling effects.The inner wall is coated with hard chrome for a long service life.2. Build-up welding of hard alloy for the two, three, four ridge top and two sides of the rotor, all the working surfaces are coated with hard chrome, good appearance and abrasive resistance. 3. The top of the rotor adopts constant hydraulic pressure seal structure , the seal effect is good with a long service time and high pressure lubrication automatic alarm when using up the oil. 3). Hoist Machine : Parameter :
model | TSJ-35 ,55L |
Motor power | 1.5KW |
Motor type | Y90L-4 |
Indle wheel swinging reducer | XWD1.5-5 |
Theory hoisting time | about 20s |
Overall size(L*W*H) | 3160X550X1700 |
SpecificationsThe machine is used for elevating rubber material, work with overturn type dispersion mixer. Dispersion mixer overturns rubber material into bucket of elevator. When mixing chamber reposition, bucket elevating, elevate rubber into two roll mill or rubber sheet machine.4). Open Mixing Mill machine(16 inches) Parameter :
Model | XK-400 | XK-450 |
|
Working diameter of rolls | mm | 400 | 450 |
Working length of rolls | mm | 1000 | 1200 |
Linear speed of front roll | r/min | 19.3 | 21.8 |
Linear speed ratio of front & rear rolls | | 1:1.27 | 1:1.27 |
Max.roll gap | mm | 10 | 12 |
Feeding capacity per batch | kg | 18-35 | 50 |
Main motor power | kW | 45 | 55 |
Overall Dimension | L | mm | 4920 | 5405 |
W | mm | 1780 | 1740 |
H | mm | 1800 | 1790 |
Gross weight | t | ~8 | ~11.4 |
Specifications:1. Roll is made of alloy chilled cast iron, which has high rigidity and good wearable.2. Temperature control adopts TCU, so temperature control is fast and accurate3. Configure and select machine type according to your request.5). Rubber Extruder (150): Parameter :
Type | XJ-150 |
Form of screw & screw thread | double-head unequal depth convergent type |
Screw diameter(mm) | 150 |
Length-diameter ratio of screw(L/D) | 4.43 |
Compression ratio | 1.34 |
Screw rotational speed(r/min) | 20-26 |
Motor power | frequency control 55kw/motor |
Production capacity(kg/h) | 700-1200 |
Steam pressure(Mpa) | 0.6 |
Cooling water pressure(Mpa) | 0.2-0.3 |
Size(L*W*H)(mm) | 3411*814*1470 |
Weight(kg) | 5000 |
Specifications:high production efficiency 2.excellent stable qualitycompetitive price and long service time 4.long operating life6). Semi-automatic Tyre Building Machine : 7). Bear Wire Winding Machine
Product type | GSQ8-38 |
Bead diameter | 8-38 inch |
Wire let-off shelf | 1-8 pcs |
Let-off shelf applicable for finished wire coil inner diameter | 350mm |
Extruder(optional) | XJΦ65(hot feed or cold feed) |
Wire die plate hole(pcs) | 1-8 |
Forming drum speed | 100r/min |
Installed capacity | 36kw |
Dimension(L*W*H) | 10500*2200*2800 mm |
Techical parameters 8).Vertical Bias Cutter 9). Tyre Vulcanizing Machine : Parameter :
Type | YLL-600 |
Working layer | 4 |
Outside diameter of plate(mm) | 800 |
Total pressure(KN) | 600 |
Plunger diameter(mm) | 200 |
Steam working pressure(Mpa) | 0.6-0.8 |
Electric control system | PLC |
Specifications:1. This machine is applicable to curing a variety of tyre2. The machine mainly consist of the following components: frame, beam, crank-bar linkage and safety devices, reducer device, steam pipes, inflatable tube line and time control system.10).Tyre Expanding Machine 11).Tow-roll Calendar Machine
Model | XY-2I()320 |
Roll dia | | 160 |
Roll working length | | 320 |
Roll ratio | | 1:1 |
roll linear speed | m/min | 7.79 |
Adjusting nip range | | 0-4.5 |
Min.Calendering product thickness | | 0.2 |
Calendering product width | | 250 |
Motor power | Kw | 5.5 |
About weight | T | ∼1.2 |
12).Tyre Packing Machine Drum roll cooling curve Parameter:
Effective width(mm) | 500 |
Effective thickness(mm) | 1-4 |
Cooling Roll Diameter(mm) | φ360x360 |
Motor Power(kw) | 1.5 |
Dimension(LxWxH)(mm) | 7000x1600x1700 |
Weight(kg) | 4700 |
Die Anschrift:
Binhai Sub-District Offices, Huangdao, Qingdao, Shandong, China
Unternehmensart:
Hersteller/Werk, Handelsunternehmen
Geschäftsbereich:
Industrielle Anlagen und Zusatzteile, Produktionsmaschinen
Zertifizierung des Managementsystems:
ISO 9001
Firmenvorstellung:
Qingdao Qishengyuan Mechanical Manufacturing Co., Ltd. Wurde im schönen Jiaonan der Westküste der Stadt Qingdao Shandong Provinz China. Unsere Firma ist spezialisiert auf Gummi-Maschinen Produktionsunternehmen mit R & D, Design, Produktion, Vertrieb und Service.
Das Unternehmen umfasst eine Fläche von 12000 Quadratmetern, Baufläche von 8000 Quadratmetern, mit Selbsteinfuhr und Exportrechte, und hat die ISO9001: 2008 & CE Qualitätsmanagement-System Zertifizierung bestanden, Great Service ist unsere Mission. Hohe Qualität ist unsere Pflicht.
Unser Unternehmen aufgrund der Jahre der Produktionstechnologie, Wir haben reiche Erfahrung Techniker, Wir spezialisieren produzieren Gummi zwei Rollen Mischmühle Maschine, Gummi-Brecher Mühle Maschine, Gummi-Kneader-Maschine, Gummi-Kalander-Maschine, Gummi-Presse Vulkanisator Maschine, Gummi-Raffinermaschine, Altreifen Recycling-Anlagen, Batch off Kühlanlagen, Gummi-Schneidemaschine, Gummi-Sieb-Maschine, Reifen Produktionslinie, Förderband Produktionslinie und so weiter.
Wir können die Maschine nach Kundenwunsch entwerfen.