Femoral introducer sets Radial introducer sets
|
Mainly Usage
Used to intrude into the artery percutaneously in intervention surgery and establish a passageway for introducing catheters into the blood vessel.
[Product Structure] The product is composed of introducer sheath, dilator, guide wire, and seldinger needle. The product is made from polyethylene, polypropylene, and stainless steel.
[Product Type] 5F, 6F, 7F, 8F
[Application Scope] The introducer set and dilator enter into the vas along guidewire to build a passage, which connects skin and vas. After the dilator pulling out, the introducer sheath is the only entrance for the vas operation. The hemostasis valve of introducer set and the silica gel film at the hub is respectively used to stop blood stream and prevent seeping blood. It could avoid hemorrhage.
[Instruction for Use]
- 1) Shave the skin, disinfect, spread the cloth and lay gauze aside.
- 2) Puncture with seldinger needle from the top of the skin with angel between 30-45 degrees until bright
- red blood gush from the hub of the seldinger needle to make sure the needle attains needed position.
- 3) Insert the guidewire across the seldinger needle until the position needed.
- 4) Hold guidewire tightly and then remove the seldinger needle.
- 5) Insert dilator into the sheath, then insert guidewire from the end of dilator, hold tightly when the dilator is approaching the skin, and rotate gently while pushing into the vessel.
- 6) Hold sheath tightly and remove guidewire and dilator.
- 7) Translate catheter across the sheath into the vessel at needed position. If necessary, fix the sheath.
- 8) After operating, remove the sheath and process hemostasis.
NOTE
Hold the guidewire anytime. According to the centimeter mark, adjust the insertion depth.
If widening percutaneous puncture is needed, do the operation with scalpel, its blade opposite to the guidewire.
| Type I (Radial) |
| Ref. NO. |
Fr Size |
Sheath |
Dilator |
Guide Wire |
Needle
(G/mm) |
I. D.
(mm) |
L
(mm) |
I. D.
(mm) |
L
(mm) |
O. D.
(inch) |
| TR01 |
5F |
1.9 |
110 |
0.68 |
168 |
0.021 |
21/45 |
| TR02 |
6F |
2.1 |
110 |
Characteristic:
Type I (Radial)
1.Longer taper ensure smooth transition between sheath and dilator
2.Excellent pushability, flexibility and radiopacity
3.0.021" stainless steel guide wire, hydrophilic guide wire available upon request
Type II (Radial)
1.Longer taper ensure smooth transition between sheath and dilator
2.Excellent pushability, flexibility and radiopacity
3.Hydrophilic guide wire with cannula needle is available
4.Hydrophilic coated sheath available
Type III (Femoral)
1.Excellent pushability, flexibility and radiopacity
2.Smooth transition between sheath and dilator
3.No leakage under 80kpa
4.Hydrophilic coated sheath available
Company Profile
SHANGHAI TEAMSTAND CORPORATION is a professional supplier of medical products and solutions. "For your health", deeply rooted in everyone's hearts of our team, we focus on medical consumables and equipment, rehabilitation consumables and equipment, laboratory products, etc.
With over 10 years' experience in medical industry, we have exported to USA, EU, Middle East, Southeast Asia and other countries. And we have gained good reputation among all of these customers for good service and competitive price.
Headquartered in Shanghai, the biggest and modernized city in China, TEAMSTAND invests 2 factories in Shandong and Jiangsu, and cooperates with over 20 factories in China. "Top 10 medical supplier in China" is our goal, and we are closing to achieve this day by day.
Welcome all friends and customers all over the world in medical industry to contact us!
FAQ
Q1. What is the advantage about your company?
A1. We have more than 10 years' experience in medical industry. Our company has a professional team and production lines.
Q2. Why should I choose your products?
A2. Our products with high quality and competitive price. We carry out doulbe QC for every order.
Q3. About MOQ?
A3. Usually is 10000 pieces. We would like to cooperate with you, no worries about MOQ, just send us your inquiry.
Q4. Is the logo can be customized?
A4. Yes, Logo customization is accepted.
Q5. What about the sample lead time?
A5. Normally, we keep most of the products in stock, we can ship samples out in 5-10 days.
Q6. What's your shipment method of the sample?
A6. We ship by FEDEX, UPS, DHL, EMS or Sea.
Geprüfter Lieferant 
