Monel-Stange K-500 K500 Legierung K-500 Uns N05500 2.4375 Geschmiedet Schmieden Stahl Hohlstangen Rund Flach Quadratstangen Stäbe (NiCu30Al, NA18, Legierung K500)

• Anpassung: Verfügbar
• Anwendung: Luftfahrt, Elektronik, Industriell, Medizin, Chemikalie
• Standard: JIS, GB, LÄRM, BS, ASTM, AISI
• Modell Nr.: Monel K500, DIN 2.4375
• Reinheit: > 98%
• Legierung: Legierung
• Art: Nickel Bar
• Pulver: nicht Powder
• Größe: Wie Sie es wünschen
• Lieferzeit: 3
• Transportpaket: Exportverpackung
• Spezifikation: 1/2"-8"
• Warenzeichen: dsw
• Herkunft: Tianjin China
• HS-Code: 7507200000
• Produktionskapazität: 50000 Tonnen/Monat

Produktbeschreibung

Nickel Alloy MonelK500 (UNS N05500) Bright Round Bar

The Monel K-500 alloy has a comparable corrosion resistance of 400, but with higher mechanical strength and hardness. Has good heat corrosion resistance and long-term tissue stability. 
MONEL K500 is a nickel-copper alloy, precipitation hardenable through additions of aluminum and titanium. MONEL K500 retains the excellent corrosion resistant characteristics of 400 and has enhanced strength and hardness after precipitation hardening when compared with 400. Alloy K500 has approximately three (3) times the yield strength and double the tensile strength when compared with 400. MONEL K500 can be further strengthened by cold working before the precipitation hardening


The characteristics of Monel K500

.Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-  oxidizing mineral acids, salts and alkalis.
. Excellent resistance to high velocity sea water
. Resistant to a sour-gas environment
. Excellent mechanical properties from sub-zero temperatures up to about 480C
. Non-magnetic alloy

Chemical Composition(%)

Ni	Cu	Al	Ti	C	Mn	Fe	S	Si
63.0-70.0	Remainder	2.30-3.15	.35-.85	.25 max	1.5 max	2.0 max	.01 max	.50 max

Application of Monel K500

Monel K-500 alloy finds wide applications in the marine, chemical, petrochemical and shipbuilding industries. Typical applications include:
Valve seals, pump sleeves and wear rings in marine environments - high strength and resistance to seawater
Pump shafts for fire-fighting pumps - high strength (resulting in smaller diameter shafts) and resistance to flowing seawater
Propeller shafts - high strength (resulting in smaller diameter shafts and thus smaller bearings) and resistance to seawater
Fasteners e.g. bolts, used in marine atmospheres and tidal waters - resistance to chloride - containing environments
Doctor blades and scrapers
Towing cable armoring - high strength, non-magnetic properties and resistance to seawater
Springs - resistance to a variety of corrosive media
Oil well drilling equipment such as non-magnetic drill collars, valves and instrumentation sleeves - resistance to chloride-containing media and sour gas environments
Aviation instrument components - non-magnetic properties




Physcial Property 

Condition	Tensile (ksi)	.2% Yield (ksi)	Elongation %	Hardness
Hot-Finished/Aged	140-190	100-150	30-20	27-38 HRC
Hot Finished/Annealed	90-110	40-60	45-25	75-90 HRB
Hot Finished/Annealed/Aged	130-165	85-120	35-20	24-35 HRC
Cold-Drawn/Aged	135-185	95-160	30-15	25-41 HRC
Cold-Drawn/Annealed/Aged	130-190	85-120	30-20	24-35 HRC

  Mechanical Properties
Typical Room Temperature Tensile Properties of Annealed Material

Product Form	Condition	Tensile (ksi)	.2% Yield (ksi)	Elongation %	Hardness
Rod & Bar	Hot-Finished/Aged	140-190	100-150	30-20	27-38 HRC
Rod & Bar	Hot Finished/Annealed	90-110	40-60	45-25	75-90 HRB
Rod & Bar	Hot Finished/Annealed/Aged	130-165	85-120	35-20	24-35 HRC
Rod & Bar	Cold-Drawn/Aged	135-185	95-160	30-15	25-41 HRC
Rod & Bar	Cold-Drawn/Annealed/Aged	130-190	85-120	30-20	24-35 HRC
Plate	Hot-Finished/Aged	140-180	100-135	30-20	27-37 HRC
Sheet	Cold-Rolled/Annealed	90-105	40-65	45-25	85 HRB Max

Q1. Where is your factory ?
A1: Our company's processing center is located in Tianjin China.
Which is well equipped with kinds of machines, such as laser cutting machine,mirror polishing machine and so on.
We can provide a wide range of personalized services according to the customers' needs.
 
Q2. What are your company's main products ?
A2: Our main products are stainless steel plate/sheet, coil, round/square pipe, bar, channel, etc.
 
Q3. How do you control quality ?
A3: Mill Test Certification is supplied with shipment, Third Party Inspection is available.
 
Q4. What are the advantages of your company ?
A4: We have many professionals, technical personnel, more competitive prices and best after-dales service than other stainless steel companies.
 
 Q5. How many coutries you already exported ? 
A5: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran, Turkey, Jordan, India, etc.
 
 Q6. Can you provide sample ?
 A6: Small samples in store and can provide the samples for free.
    Customized samples will take about 5-7days.