Grundlegende Informationen.
Material Eigenschaft
Brandschutz
Bescheinigung
ISO9001: 2008, CE
Energie Sparen
Energy Saving
Kundenspezifische
Kundenspezifische
Application for
Separation of Gold, Tin, Tungsten, Titanium, Hemat
Produktbeschreibung
Jigging is one of the relative new methods for gravity concentration. As a rougher or cleaner device, it is widely applied on the separation of gold, tin, tungsten, titanium, hematite, coal and other minerals due to its high processing capacity, large range of separation size and simplicity of operation and maintenance.
A traditional jig is mostly driven by eccentric circle, its jigging pulse curve is mostly sine wave, the upward or downward flow rate generated by the diaphragm movement and action time are almost same, therefore, it is not conductive to jigging bed dilation and stratification according to the proportion of mineral particles, and affects the sorting ratio and recovery of equipment.
Saw-tooth wave jig is a energy-saving gravity concentration device which is based on the traditional jig according to the distribution rule of jigging bed theory, its jig pulse curve likes the saw-tooth waveform which makes the upward flow faster than the downward; the upward flow time is short, the downward is long, which overcomes the shortcoming of upward flow, downward flow and action time produced by the sine-wave pulse curve, enhances the loose degree of the bed and alleviates the inhalation effects, then the heavy mineral particles in the ore are fully settlement, which enhances the sorting ratio and recovery of equipment. Compared with the sine-wave jig, the recovery of Sn increases 3.01%, W: 5.5%, Pb: 1.63%, Zn: 2.04%, respectively; water consumption is reduced by 30%-40%, site area is decreased 1/3, the stroke can be adjusted, dragging by the electromagnetic adjustable speed motor makes the pumping speed can be adjusted endlessly. Its performance reaches the domestic advanced level; it is one of the ideal energy-saving gravity concentration equipments.
Main Features
ü High concentration ratio and high recovery, High capacity. ü Easy to install, operate and maintain. ü The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling. ü Saving water 30-40% than ordinary jig, Suitable for roughing and desliming. ü Fabricated with highest quality material, the pulsation speed very easy adjusted by regulator. ü Can achieve a good result in processing such as placer gold, tungsten, iron, tin, hematite, cope, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone etc. |
Specifications, Structure and Types
| 1. Dressing tank 2. Rubber diaphragm 3. Cone 4. Electromagnetic adjustable speed motor 5. Cam box 6. Feed pipe flange 7 screen 8 feed launder |
Figure 1. The structure of the JT2-2 saw-tooth wave jig. |
| 1. Box 2.leverage 3/6. Bearing7206 4/7/8 Adjustment gland 5. Gear shaft 9. Bearing 313 10. Bearing 8112 11 Crankshaft 12/15/23/27. Nut 13.dust cover 14 .punch 16.cam 17 .punch block 18/19. joint bearing inner ring 20. Joint bearing outer ring 21 .bearing bushing 22 .shaft 24. Gear 25. Bearing 2216 26. Adjustment angle 28. Shaft 29 .Bearing 7207 30. Outer bearing (roller) 31 .rear cover 32 .adjustment screw |
Figure 2. Cam box. |
Main Structure
The structures of the saw-tooth wave jig are shown in (Figure 1).
Types
The saw-tooth wave is divided into left-style and right-style according to the installation location of feed pipe flange. Standing on the ore feeding to look at the ore discharge, feed pipe flange on the left is left type, on the right is the right type.
Technical Specifications
Model | JT-0.15 | JT-0.57 | JT-1 | JT2-2 | JT3-1 | JT4-2 | JT5-2 |
Jigging Chamber | Section shape | Trapezoidal | Trapezoidal | Trapezoidal | Tectangular | Trapezoidal | Rectangular | Trapezoidal |
Length × wider (mm) | 200-400 ×500 | 450-750 ×950 | 450-900 ×1500 | 1070×1070 | 960-2000 ×1950 | 1510×1510 | 1200-2000 ×3150 |
Column number | single | single | single | single | single | single | single |
Chamber number (one) | 1 | 1 | 1 | 2 | 1 | 2 | 2 |
Single area (m2) | 0.15 | 0.57 | 1 | 1.14 | 3.3 | 2.28 | 2.12 (single) 2.77 (double) |
Aggregate area (m2) | 0.15 | 0.57 | 1 | 2.28 | 3.3 | 4.56 | 5 |
Feeding Particle Size (mm) | 5 | 6 | 5 | <10 | <20 | <8 or <60 | <8 or <60 |
Processing capacity (t/h) | 0.2-0.3 | 2-6 | 2-3 | 7.5-15 | 10-15 | 12-16 | 10-20 |
Water consumption (m3/h) | 1-2 | 1-2 | 1-2 | 1-2 | 1-2 | 1-2 | 1-2 |
Diaphragm | Stroke (mm) | 4.2-30 90-180 | 12\17\21 | 15\20\25 | 12\17 | 10-47 | 6.5-26 | 15\20\25 |
Freque- ncy (min-1) | | 60-200 | 80\100\120 | 60-200 | 80-100 | 80-150 | 80-110 |
Motor | model | YCT112-4B | YCT132-4B | YCT160-4A | YCT32-4 | YCT-4B | YCT160-4B | YCT200-4A |
power (kw) | 0.75 | 1.5 | 2.2 | 3 | 5.5 | 5.5 One chamber 7.5 Two chamber | 5.5 One chamber 7.5 Two chamber |
Dimensions (mm) | 734×960 × 1232 | 1560×850 ×1550 | 2060×1112 ×1890 | 3225×1550 ×2150 | 2662×2000 ×3030 | 4240×1990 ×2750 | 3940×2006 ×2580 |
Weight(kg) | 284 | 612 | 914 | 1637 | 3260 | 3500 | 3854 |
Table 2. The parameters of the saw-tooth wave jig.
Note: handling capacity and feeding water amount is varying with ore particle size, ore properties and operating conditions.
Die Anschrift:
No. 7, Industrial Road3 of Guzhang Industrial Park, Ganzhou, Jiangxi, China
Unternehmensart:
Hersteller/Werk
Geschäftsbereich:
Mineralien und Energie, Produktionsmaschinen
Zertifizierung des Managementsystems:
ISO 9001
Firmenvorstellung:
Jiangxi Tongli Mining Machinery Co. Ltd, mit der Sammlung Forschung und Entwicklung, Produktion, Vertrieb und Service in der Integration von Bergbaumaschinen produzierenden Unternehmen, wurde im Jahr 2001 gegründet, zuvor. Es umfasst eine Fläche von mehr als 20 Hektar, eine Gesamtinvestition Mehr als 5000 Zehntausend Yuan, bestehende Mitarbeiter mehr als 100.
Unser Unternehmen ist in der mineralischen Verarbeitungsanlagen Produkt-Design und Produktion seit 15 Jahren Geschichte beschäftigt, hat reiche Erfahrung in Design und Produktion gesammelt. Wir hauptsächlich die Herstellung der Produkte wie Schütteltisch, Flotationsgeräte, Zerkleinerung (Pulver) Ausrüstung, Siebanlagen, Erz-Waschanlage Klassifizierenden Ausrüstung, Rühreinrichtung, Spiralschacht-Ausrüstung, Schwerkraft-Trennung Jig, Fütterungsausrüstung, Fräsmaschinen. Mit der besten Qualität, professionellem Service und konkurrenzfähigem Preis. Wir können supplyProfessionalfree Design, Test, schnelle Lieferung. Etc