Grundlegende Informationen.
Stromversorgung Typ
Diesel
Kundenspezifische
Kundenspezifische
Structure
Ccsb Steel Plate
Discharge Pipe Dia.
200mm
Spezifikation
ISO9001: 2008
Produktbeschreibung
6 Inch Small Cutter Suction Dredger (LDCSD150)
LDCSD150 Cutter Suction Dredger of steel construction, the non self-propelled, dismountable type, is able to berth and dredge at any waters both in the coastal area and inland rivers.
The dredger can be used to excavate and transport cohesive sediment below the class III specified in code for dredging engineering construction technique issued by Ministry of Water Resources(MWR) of P.R.China.
In the course of technical designing, we have considered special requirements for local tropical climate conditions such as meteorological and waters distributing state etc.
It's hull consists of a main pontoon and two side pontoons, which is easy to dismantle or mount for transportation by road, rail or water, and is easy to reassemble at project site.The engines and dredge pump are located in the center pontoon,the two side pontoons serve as fuel bunkers,ballast tanks and storage tanks.
The dredger is powered by diesel engine. The dredge pump is driven by the engine through the gearbox. On the gearbox, two hydraulic pumps are equipped, to supply power for all the hydraulic equipment such as cutter, swing and ladder winches, and the spud rams etc.
The spacious control cabin is ergonomically designed with 360 degree view. All the operation buttons, swifts, indicators, gauges are equipped on the control desk. Only one operator can control the whole dredger in the operation room.
The dredger is painted by 4 layers of marine paint to protect from the corrosion. The ZINC anode can be used to give better anti-corrosion function.
Working Principle
A sand dredger's (CSD) suction tube has a cutter head at the suction inlet, to loosen the earth and transport it to the suction mouth. The cutter can also be used for hard surface materials like gravel or rock.The dredged sand is usually sucked up by a wear-resistant centrifugal pump and discharged through a pipe line on to the land. Sand dredger is a good choice for dredging activites.
Application
CSD series dredgers can apply to all kinds of soil structures and can be widely used in mineral digging,port(channel) dredging and reclamation works.
By absorbing advanced technology of Dutch and American related products,this series of dredgers have advantages of rational design,all hydraulic control,simple operation,little maintenance and strong power.The capacity of CSD dredgers rangs from 100m3/hr to 1000m3/hr,the dredging depth from 1m to 25m and discharge distance from 500m to 3000m which can satisfy different work demands.
After-Sales Service
1.We sign a long-time after-sale service agreement with customers.
2.We provide rational and practical design according to customers' request.
3.We send engineers to assemble and test the machine within the period as agreed in the contract.
4.Within warranty period,we provide free repair if quality problems emerge.
5.We provide free tranining of operation and maintenance for customers.
6.We supply high quality accessories in low price.
7.We make an excellent filing of customers for long-term following-up service.
No. | Description | Specification | Remark |
A | Supplier | Hebei Leader | ISO Certified Enterprise |
B | Brand | | Registered Brand |
C | Model | LDCSD-150 | |
D | Dredger Unit |
E E | 1. Dredger Type | Cutter Suction Dredger | |
| 2. Principle Dimensions | | |
(1) Length overall | 17.0 m | |
(2) Width Overall | 4.6 m | |
(3) Hull Depth | 1.4 m | |
(4) Draft | 0.8 m | |
(5) Dredging Depth | 6.0 m | |
(6) Discharge Distance | 300 m | |
(7) Suction Pipe Dia. | 250 mm | |
(8) Discharge Pipe Dia. | 200 mm | |
(9) Water Flow | 500 m3/hr | |
(10) Power | 224 Kw, Cummins | |
3. Main Pontoon | | |
(1) Length | 9.0 m | |
(2) Width | 2.2 m | |
(3) Plate Thickness | 6 mm | CCS Marine Steel Plate |
(4) Plate Thickness-Bottom | 8mm | |
4. Side Pontoons | | |
(1) Length | 11.5 m | |
(2) Width | 1.2 m | |
(3) Depth | 1.4 m | |
5. Dredging Pump | | Inside the Pontoon |
Made | SHIJIAZHUANG PUMP GROUP | Australian Warman Technology |
(2) Model | 8/6 E-G | |
(3) Head | 37 m | |
(4) Maximum Passing Particle | 120 mm | |
(5) Water Flow | 500 m3/hr | |
6. Main Engine | | |
(1) Manufacturer | Cummins | |
(2) Model | NTA855-M | |
(3) Rated Power with RPM | 224 KW @ 1800 RPM | |
(4) Amount | 1 Set | |
7. Gear Box | | |
(2) Model | Marine use | |
(3) Amount | 1 Set | |
(3) Made | Hangzhou | |
8. Cutter Head | | |
(1) Type | Crown | |
(2) Wearing type | Replaceable alloy cutter teeth | |
(3) Driven | Hydraulic Motor | |
(4) Diameter | 850 mm | |
(5) Cutter Shaft Power | 30 kw | |
(6) Speed | 0-40 r/min | |
9. Ladder Winch | | |
(1) Line Pull - Second Layer | 25 KN | |
(2) Line Speed - Second Layer | 0-20 m/min | |
(3) Wire Size | 14 mm | |
(4) Drive | Hydraulic Motor | |
10. Swing Winch | | |
(1) Line Pull - Second Layer | 25 KN | |
(2) Line Speed - Second Layer | 0-20 m/min | |
(3) Wire Size | 14 mm | |
(4) Drive | Hydraulic motor | |
11. Spuds | | |
(1) Amount | 2 | |
(2) Dia. | 277 mm | |
(3) Thickness | 14 mm | |
(4) Length | 9 m | |
(5) Material | 16 Mn | |
(6) Drive | Hydraulic Ram | |
12. Operation Cabin | | |
(1) Main Item | PLC control board | Siemens PLC |
(2) Air Condition | 1 Set | |
(3) Operation instrument, Indicator,Button | 1 Set | |
(4) Dredging Depth Indicator | 1 Set | |
13. Hydraulic System | 1 Set YUKEN series valves; Vikers Series Pumps |
14. Electric System | 1 Set Schneider Series Components |
15. Anchors and Wire Ropes | Anchors: 2 Nos. @ 100kg Side winch wire (fitting): Minimum 100 m on each side. |
16. Auxiliary enerator | |
Made | Sunvin | Supply power for charging battery, fuel pump, lights, welding machine, air conditioner,etc. |
(2) Power | 15 kw |
(3) Voltage | 220/380 |
(4) Amount | 1 Set |
17. Deck Generator | | |
Brand and Model | Changzhou Yameike | When in emergency condition, the deck generator will start to supply power. |
Power | 15 kw |
Voltage | 220/380 v |
Amount | 1 Set |
18. Light | 1 Set |
19. Signal Mast | Navigation light |
Die Anschrift:
Room 601, Unit2, 1 Building, Xingguang Neighborhoods, Mingyuan Road, Gaokai District, Baoding, Hebei, China
Unternehmensart:
Hersteller/Werk, Handelsunternehmen
Geschäftsbereich:
Alltagsgegenstände, Auto, Motor und Zusatz, Industrielle Anlagen und Zusatzteile, Kleidung & Accessories, Koffer, Handtaschen und Geschenkkisten, Landwirtschaft & Essen, Mineralien und Energie, Produktionsmaschinen, Sport und Erholung, Werkzeug
Zertifizierung des Managementsystems:
ISO 9001, ISO 9000, GMP, BSCI
Firmenvorstellung:
Hebei Verwaltung für Industrie und Handel Ministerium genehmigt der Umfang unseres Geschäfts sind:
Hebei Leader IMP. &EXP. Co., Ltd ist ein Experte Außenhandelsunternehmen, gegründet auf der Grundlage der Einheit von BAODING HONGYE KLEIDUNG Co., Ltd, genehmigt durch HANDEL ABTEILUNG der PRC, eigene Import-und Exportrecht, Hauptgeschäft ist Import, Export und IMP. UND EXP. Agentur.
Jetzt hat die Gesellschaft 15 Geschäftsabteilungen, 1 Kundendienst-Abteilung und 1 Finanzabteilung. Hauptgeschäftsabteilungen sind Mechano-Abteilung, elektronische Abteilung, Hardware- und Elektromaterial-Abteilung, Computer-/Weichwareheihe-Abteilung, Bekleidung und Textilien-Abteilung, tägliche Bedarfsartikel-Abteilung, Handwerksgeschenke-Abteilung, Haushaltsgeräte-Abteilung, Bürobedarf, Bildungsartikel Abt., Sport- und Sportgeräte, Bauernhof und Viehzucht Abt., Mineralien Abt., Baustoffe Abt., grün envrionmental Protection Abt...
Der Kundendienst der Firma bauen eine Reihe von kompletten internationalen Handel läuft systerm, integrierte IMP. &EXP. Geschäft, Dokumente machen, Warenkontrolle, Zollabfertigung, Transport, Abwicklung des Rückvergütungsaustausches usw. unterstützende Dienstleistungen moderner Logistik-Betriebsplattformen.
Das Ziel des Unternehmens ist die Pflege für Integrität, versuchen unser Bestes, um erstklassige Produkte, hohe Qualität und effiziente und professionelle Service und starke technische Unterstützung für Freunde, die aus dem in-und Ausland bieten.