Set Loop Pulsating High Gradient Magnetic Separator

Separation of the black metal: Martite, hematite, limonite, siderite, manganese etc.
Separation of non-ferrous metal: Black tungsten, garnet etc.
Rare metal: Tantalum niobite, iron lithium mica, monazite, yttrium phosphorus ore etc ores recovery.
Non-metallic class: Purification in removing impurity of quartz, feldspar, kaolin, refractory.
Before starting test, must check the machine parts installation to see whether they meet the requirements or not strictly, screw bolt is loose or not, pulling belt to give a test, if there is a collision phenomenon. Meanwhile, check the direction of rotation. It is strictly prohibited to crushing flammable and explosive substances, in order to avoid the accident.
In production process, feed material in evenly to guarantee grinding quality and produce normally. At same time, motor must not be overloaded to guarantee machine in normal operation.
Besides of often check each part tighten or loose, also need to pay more attention to check the wear situation of wearing part. If weared badly, should change in time, in order to avoid damage to the main components, And take necessary precautions against fire.
Due to the high speed, besides of installation strong, should keep good lubrication, to maintain the normal operation of the machine. Generally, bearing temperature not to exceed 70 degrees is normal, main bearing weekly plus a butter, molybdenum disulfide, efficient butter is much better.