Grundlegende Informationen.
Rolling Body
Roller Bearings
The Number of Rows
Single
Outer Dimension
Small and Medium-Sized (60-115mm)
Spherical
Non-Aligning Bearings
Load Direction
Radial Bearing
Inner Diameter
2.0000 Inches
Outer Diameter
3.5000 Inches
Warenzeichen
Luoyang Lirui/LRZ
Herkunft
Luoyang, Henan China
Produktbeschreibung
Introduction of product:
Tapered roller bearing mainly bear radial and axial load. Bearing capacity depends on the Angle of the outer ring raceway, The greater the angle is , the greater load capacity will be. The kind of bearings belong to separated type bearing.
According to the column number of scroll body in bearing, it can be divided into single-row, double-row and four-row tapered roller bearings. Single-row tapered roller bearing can adjust the size of the clearance during the installation process. While the clearance of double-row and four-row tapered roller bearings has been given when the products leave the factory without being adjusted, according to users' requirements.
Four-row bearing has the same function as the double-row bearings except lower rotation speed . Sealed double-row, four-row tapered roller bearings have characteristics of low utilization rate of lubricant, while the price is more expensive than the three kinds of bearings mentioned above..
The ability that Single-row tapered roller bearing axial burden can bear depends on the contact Angle, that is the outer ring raceway Angle. Greater the angle is , Greater the axial load capacity will be. There are two types of tapered roller bearing, including single-row and double-row tapered roller bearings, in which the single-row bearings are mostly used. Small sizes of double-row tapered roller bearings are used in the car's front wheel hubs. Four-row tapered roller bearings are used in large cold, hot rolling mills, and other heavy machines.
Tapered roller bearing
This kind of bearing is produced with a cone shape roller, which is guided by inner ring.
Single-row bearing can withstand radial load and one-way axial load, double-row bearings can withsatnd radial load and two-way axial load
Apply to bear heavy load and impact load
According to the difference of contact (alpha), it can be divided into small cone Angle, large cone Angle and taper Angle three patterns, the larger the contact Angle is, the greater axial load capacity will be.
Outer ring and inner components (inner ring, roller and cage components) can be separated, easy to install.
Rear auxiliary code "J" or "JR" type bearings has international interchangeability.
Many inch series products are also included in this kind of bearings.
Main application:
car: front wheel, rear wheel, transmission, differential pinion shaft. Machine tool spindle, building machinery, large agricultural machinery, railway vehicle gear speed reducer, rolling mill roll neck and reduction gear.
Products show:
Model number | Dimension(mm) | Weight (KG) | rated burden (KN) | Limit speed (r.p.m) |
d | D | B | C | T | rmin | r1min | Weight | Dynamic load | static load | Oil lubrication | Grease lubrication |
368/362 | 50.800 | 90.000 | 22.225 | 15.875 | 20.000 | 1.5 | 2.0 | 0.514 | 76.5 | 90.5 | 5500 | 4100 |
368A/362A | 50.800 | 88.900 | 22.225 | 16.513 | 20.638 | 3.5 | 1.3 | 0.500 | 76.5 | 90.5 | 5500 | 4100 |
368/363 | 50.800 | 90.000 | 22.225 | 20.000 | 20.000 | 1.5 | 0.8 | 0.546 | 76.5 | 90.5 | 5500 | 4100 |
368/363A | 50.800 | 88.900 | 22.225 | 16.513 | 20.638 | 1.5 | 1.3 | 0.502 | 70 | 87.5 | 5500 | 4100 |
387/382 | 57.150 | 98.425 | 21.946 | 17.826 | 21.000 | 2.3 | 0.8 | 0.596 | 78 | 96.5 | 5000 | 3700 |
387S/382A | 57.150 | 96.838 | 21.946 | 15.875 | 21.000 | 0.8 | 0.8 | 0.559 | 78 | 96.5 | 5000 | 3700 |
387A/382A | 57.150 | 96.838 | 21.946 | 15.875 | 21.000 | 3.5 | 0.8 | 0.557 | 78 | 96.5 | 5000 | 3700 |
390/394A | 57.150 | 110.000 | 21.996 | 18.124 | 21.999 | 1.8 | 1.1 | 0.908 | 89.5 | 120 | 4300 | 3200 |
395/394A | 63.500 | 110.000 | 21.996 | 18.824 | 22.000 | 3.5 | 1.2 | 0.837 | 89.5 | 120 | 4300 | 3200 |
395A/394A | 66.675 | 110.000 | 21.996 | 18.824 | 22.000 | 0.8 | 1.2 | 0.785 | 89.5 | 120 | 4300 | 3200 |
399A/394A | 68.263 | 110.000 | 21.996 | 18.824 | 21.999 | 1.8 | 1.1 | 0.715 | 89.5 | 120 | 4300 | 3200 |
455/453A | 50.800 | 107.950 | - | 22.225 | 27.783 | - | - | 1.234 | - | - | - | - |
462/453X | 57.150 | 104.775 | 29.317 | 24.605 | 30.162 | 2.3 | 3.3 | 1.010 | 115 | 148 | 4700 | 3500 |
462A/453X | 57.150 | 104.775 | 29.317 | 24.605 | 30.162 | 2.3 | 3.3 | 1.010 | 115 | 148 | 4700 | 3500 |
462/453 | 57.150 | 107.950 | 29.317 | 27.000 | 27.795 | 2.3 | 0.8 | 1.128 | 115 | 148 | 4700 | 3500 |
482/472 | 69.850 | 120.000 | 29.007 | 24.237 | 29.795 | 3.5 | 2.0 | 1.300 | 128 | 177 | 4000 | 3000 |
484/472 | 70.000 | 120.000 | 29.007 | 24.237 | 29.796 | 2.0 | 2.0 | 1.300 | 128 | 177 | 4000 | 3000 |
527/522 | 44.450 | 101.600 | 36.068 | 26.988 | 34.925 | 2.5 | 2.3 | 1.370 | 135 | 165 | 5000 | 3800 |
528X/520X | 50.000 | 100.000 | 35.999 | 26.988 | 34.925 | 2.5 | 2.3 | 1.200 | 120.5 | 103.9 | 5000 | 3800 |
529/522 | 50.800 | 101.600 | 36.068 | 26.988 | 34.925 | 0.8 | 3.3 | 1.230 | 135 | 165 | 5000 | 3800 |
535/532A | 44.450 | 111.125 | 36.957 | 30.162 | 38.100 | 3.5 | 3.3 | 1.790 | 129 | 144 | 4800 | 3600 |
239A/532X | 53.975 | 107.950 | 36.957 | 28.575 | 36.521 | 5.5 | 3.3 | 1.427 | 141 | 177 | 4800 | 3600 |
02474/02420 | 28.575 | 68.262 | 22.225 | 17.462 | 22.225 | 0.8 | 1.5 | 0.048 | 57 | 67 | 770 | 5800 |
02872/02820 | 28.575 | 73.025 | 22.225 | 17.463 | 22.225 | 0.8 | 3.3 | 0.484 | 56.5 | 68 | 7000 | 5300 |
14124/14276 | 31.750 | 69.012 | 19.583 | 15.857 | 19.845 | 0.8 | 1.3 | 0.347 | 43.1 | 35.8 | 7400 | 5600 |
14313/14276 | 33.338 | 69.012 | 19.583 | 15.857 | 19.845 | 0.8 | 0.3 | 0.333 | 48.5 | 58 | 7400 | 5600 |
14137/14276 | 34.925 | 39.012 | 19.583 | 15.857 | 19.845 | 1.5 | 1.3 | 0.314 | 44 | 55 | 7400 | 5600 |
14138A/14276 | 34.925 | 69.012 | 19.583 | 15.857 | 19.845 | 3.5 | 1.3 | 0.312 | 48.5 | 58 | 7400 | 5600 |
15100/15245 | 25.400 | 62.00 | 20.638 | 14.288 | 19.050 | 0.8 | 1.3 | 0.330 | 46.5 | 54 | 8200 | 6100 |
15106/15250X | 26.988 | 63.500 | 20.638 | 15.875 | 20.638 | 0.8 | 1.58 | 0.310 | 41.7 | 52 | 8200 | 6100 |
539/532A | 53.975 | 111.125 | 36.957 | 30.162 | 38.100 | 2.5 | 2.3 | 1.580 | 141 | 177 | 4800 | 3600 |
539/532 | 53.975 | 111.125 | 36.957 | 33.338 | 38.100 | 3.5 | 3.3 | 1.660 | 141 | 177 | 4800 | 3600 |
1988/1931 | 28.575 | 60.325 | 19.355 | 15.875 | 19.845 | 3.5 | 1.3 | 0.250 | 37 | 46 | 9800 | 6700 |
28584/28521 | 52.388 | 92.075 | 25.400 | 19.845 | 24.608 | 3.6 | 0.8 | 0.660 | 83.5 | 116 | 5300 | 4000 |
3975/3920 | 50.800 | 112.712 | 30.048 | 23.812 | 30.162 | - | - | 1.530 | 119 | 174 | 4300 | 3200 |
3975/3926 | 50.800 | 112.712 | - | - | 33.338 | - | - | 1.590 | - | - | - | - |
2780/2720 | 36.487 | 76.200 | 25.654 | 19.050 | 23.812 | 1.5 | 3.3 | 0.513 | 67 | 85 | 6800 | 5100 |
2785/2720 | 33.338 | 76.200 | 25.654 | 19.050 | 23.812 | 3.5 | 3.3 | 0.551 | 73 | 90.5 | 6800 | 5100 |
2788/2720 | 38.100 | 76.200 | 25.654 | 19.050 | 23.812 | 3.5 | 3.3 | 0.494 | 73 | 90.5 | 6800 | 5100 |
2789/2729 | 39.688 | 76.200 | 25.654 | 19.050 | 23.812 | 3.5 | 0.8 | 0.475 | 73 | 90.5 | 6800 | 5100 |
2790/2720 | 33.338 | 76.200 | 25.654 | 19.050 | 23.812 | 1.5 | 3.3 | 0.552 | 73 | 90.5 | 6800 | 5100 |
3379/3320 | 34.925 | 80.167 | 30.931 | 23.812 | 29.370 | 3.5 | 3.3 | 0.700 | 95 | 112 | 6400 | 4800 |
3490/3420 | 38.100 | 79.375 | 29.771 | 23.812 | 29.370 | 3.5 | 3.3 | 0.669 | 93 | 114 | 6600 | 4900 |
3767/3720 | 52.388 | 93.264 | 30.302 | 23.812 | 30.162 | 2.3 | 3.3 | 0.828 | 102 | 134 | 5300 | 4000 |
3780/3720 | 50.800 | 93.264 | 30.302 | 23.812 | 30.162 | 3.5 | 3.3 | 0.858 | 102 | 134 | 5300 | 4000 |
3872/3820 | 34.925 | 85.725 | 30.162 | 23.812 | 30.162 | 3.5 | 3.3 | 0.890 | 105 | 132 | 6000 | 4500 |
3876/3820 | 38.100 | 85.725 | 30.162 | 23.812 | 30.162 | 3.5 | 3.3 | 0.848 | 105 | 132 | 6000 | 4500 |
3982/3920 | 63.500 | 112.712 | 30.048 | 23.812 | 30.162 | 3.5 | 3.3 | 1.200 | 119 | 174 | 4300 | 3200 |
3984/3920 | 66.675 | 112.712 | 30.048 | 23.812 | 30.162 | 3.5 | 3.3 | 1.120 | 119 | 174 | 4300 | 3200 |
15113/15245 | 31.750 | 62.000 | 20638 | 14.288 | 19.050 | 0.8 | 1.3 | 0.255 | 46.5 | 54 | 8200 | 6100 |
18590/18520 | 41.275 | 73.025 | 17.462 | 12.700 | 16.667 | 3.5 | 1.3 | 0.279 | 46 | 55.5 | 6600 | 5000 |
24780/24721 | 41.275 | 76.200 | 23.020 | 20.638 | 22.225 | 3.5 | 1.5 | 0.456 | 58.3 | 67 | 6500 | 4900 |
25572/25520 | 38.100 | 82.931 | 25.400 | 19.050 | 25.400 | 0.8 | 0.8 | 0.640 | 76 | 98 | 6000 | 4500 |
25577/25520 | 42.875 | 82.931 | 25.400 | 19.050 | 23.812 | 3.5 | 0.8 | 0.562 | 76 | 98 | 6000 | 4500 |
25580/25520 | 44.450 | 82.931 | 25.400 | 19.050 | 23.812 | 3.5 | 0.8 | 0.558 | 76 | 98 | 6000 | 4500 |
25590/25520 | 45.618 | 82.931 | 25.400 | 19.050 | 23.812 | 3.5 | 0.8 | 0.542 | 76 | 98 | 6000 | 4500 |
25877/25821 | 34.925 | 73.025 | 24.608 | 19.050 | 23.812 | 3.5 | 0.8 | 0.461 | 71 | 85 | 7100 | 5300 |
29590/29522 | 66.675 | 107.950 | 25.400 | 19.050 | 25.400 | 3.5 | 0.8 | 0.869 | 91.5 | 140 | 4500 | 3200 |
29685/29620 | 73.025 | 112.712 | 25.400 | 19.050 | 25.400 | 3.5 | 3.3 | 0.863 | 85.8 | 91.1 | 4100 | 3100 |
LM29749/LM29710 | 38.100 | 65.088 | 18.288 | 13.970 | 18.034 | 2.3 | 1.3 | 0.238 | 43.5 | 57 | 7400 | 5500 |
LM29749/LM29711 | 38.100 | 65.088 | 18.288 | 15.748 | 19.812 | 2.3 | 1.3 | 0.251 | 43.5 | 57 | 7400 | 5500 |
33225/33472 | 57.150 | 120.000 | 30.162 | 23.444 | 29.794 | 3.5 | 0.8 | 1.637 | 105 | 131 | 4000 | 3000 |
33262/33462 | 66.675 | 117.475 | 30.162 | 23.812 | 30.162 | 3.5 | 3.3 | 1.320 | 107 | 139 | 4000 | 3000 |
33275/33462 | 69.850 | 117.475 | 30.162 | 23.812 | 30.162 | 3.5 | 3.3 | 1.261 | 117 | 175 | 4000 | 3000 |
33281/13462 | 71.438 | 117.475 | 30.162 | 23.812 | 30.162 | 3.5 | 3.3 | 1.200 | 117 | 175 | 4000 | 3000 |
33885/33821 | 44.450 | 92.250 | 28.575 | 22.225 | 27.783 | 0.8 | 2.3 | 0.950 | 107 | 139 | 5200 | 3900 |
33891/33821 | 52.388 | 95.250 | 28.575 | 223.225 | 27.783 | 3.5 | 2.3 | 0.816 | 107 | 139 | 5200 | 3900 |
33889/33821 | 50.800 | 95.250 | 28.575 | 22.225 | 27.783 | 3.5 | 2.3 | 0.845 | 107 | 139 | 5200 | 3900 |
39585/39520 | 63.500 | 112.712 | 30.162 | 23.812 | 30.162 | 3.5 | 3.3 | 1.240 | 138 | 195 | 4200 | 3200 |
39590/39520 | 66.675 | 112.712 | 30.162 | 23.812 | 30.162 | 3.5 | 3.3 | 1.164 | 138 | 195 | 4200 | 3200 |
45284/45220 | 50.800 | 104.775 | 30.958 | 23.812 | 30.162 | 6.4 | 3.3 | 1.115 | 130 | 169 | 4700 | 3500 |
47874/47420 | 69.850 | 120.000 | 32.545 | 26.195 | 32.545 | 3.5 | 3.3 | 1.450 | 147 | 214 | 4000 | 3000 |
LM48548/LM48510 | 34.925 | 65.088 | 18.288 | 13.970 | 18.034 | 4.9 | 1.3 | 0.246 | 46.5 | 56 | 7600 | 5700 |
LM48548/LM48511A | 34.925 | 65.088 | 18.288 | 17.018 | 21.082 | 4.9 | 1.5 | 0.273 | 42.5 | 51 | 7600 | 5700 |
LM48548A/LM48511A | 34.925 | 65.088 | 18.288 | 17.018 | 21.082 | 0.8 | 1.5 | 0.273 | 42.5 | 51 | 7600 | 5700 |
53176/53375 | 44.450 | 95.250 | 28.300 | 20.638 | 30.958 | 1.3 | 0.8 | 0.927 | 82.5 | 92 | 5000 | 3700 |
Die Anschrift:
No. 15, Songshan Road, District Jianxi, Luoyang City, Luoyang, Henan, China
Unternehmensart:
Hersteller/Werk
Geschäftsbereich:
Industrielle Anlagen und Zusatzteile, Messinstrumente, Mineralien und Energie, Produktionsmaschinen
Zertifizierung des Managementsystems:
ISO 9001, BS 25999-2
Firmenvorstellung:
Luoyang Lirui Bearing Co., Ltd, in einer alten Hauptstadt Luoyang, die eine große Produktionsbasis für Lager ist, ist ein neues High-Tech-Unternehmen mit der Integration von Design, Forschung und Entwicklung, Fertigung. Unser Unternehmen basiert nicht nur auf der Entwicklung des chinesischen Lagers, sondern auch auf der globalen Perspektive und verfügt über ein erstklassiges Team von Lagerexperten und -Ingenieuren, das heimische erstklassige CNC-Schleifen, automatische Anlagen und große, anspruchsvolle Anlagen, all dies garantieren, dass unsere Lager eine hohe Präzision und Stabilität haben.
Unsere Firma wurde im Jahr 1994 gefunden, seit der Gründung, erben wir "ehrlich und vertrauenswürdig, die Benutzer orientiert", halten Sie sich an hohe Qualität Pre-Sales-technischen Support, überlegene Produktqualität gepaart mit ausgezeichneten After-Sales-Service, um jeden Kunden zu dienen. Wir sind spezialisiert auf die Konstruktion, Forschung und Produktion von verschiedenen nicht-Standard-Lager, importierte Substitution Lager und Sonderlager, die weit verbreitet sind, um Luft-und Raumfahrt, Präzisionsinstrumente, Textil, Präzisionsdrehmaschine, Port, Bergbau, medizinische Behandlung, Kohle, Zement, Ölförderung, Windkraft, Industrieroboter, Rüstungsindustrie und andere Bereiche. Eine große Anzahl unserer Produkte werden in die Vereinigten Staaten, Großbritannien, Kanada, Deutschland, Österreich, Italien, Japan, Korea, Singapur, Indien, Pakistan, Thailand, Malaysia und anderen Ländern.
Wir haben das Zertifikat ISO9001: 2000 erhalten, wie es in "Qualitätsrichtlinie" vertreten ist, Lirui mit Fokus auf umfassendes Qualitätsmanagement, und nehmen es als eine nachhaltige Anstrengung zur Verbesserung der Kundenzufriedenheit. Dazu muss unser Team einschließlich der Geschäftsleitung die Ausbildung und Weiterbildung übernehmen. Bis dahin ist es notwendig, eine umfassende Bewertung vorzunehmen, um sicherzustellen, dass dies in diesem Bereich reibungslos vonstatten geht. Das Unternehmen bildet nach und nach ein stabiles Land- und weltweites Vertriebsnetz. Jedes Produkt spiegelt das ständige Streben nach der Exzellenz der Lirui Mitarbeiter, und dient unseren Kunden durch qualifizierte Produkte und Geschäftsphilosophie "Innovation, Integrität und pragmatische, Entwicklung". Werte für die Kunden zu schaffen und die Zufriedenheit der Kunden zu garantieren, sind unsere Prinzipien, daher begrüßen wir aufrichtig Freunde aus aller Welt, die kommen, um zu diskutieren, auszutauschen und zusammenzuarbeiten. Lassen Sie uns unsere gemeinsamen Hände nutzen, um eine strahlende Zukunft zu schaffen.