Grundlegende Informationen.
X-ray Tube
Imported or Domestic
X-ray Generator
Imported PLC Control
X-ray Tube Voltage
10~60kv
X-ray Tube Current
2~80mA
X-ray Tube Maxi Output Power
2.4kw or 2.7kw
X-ray Generator Maxi Output Power
5kw
X-ray Goniometer
Vertical or Horizontal
X-ray Goniometer Scanning Range
-35degree ~170 Degree
X-ray Goniometer Scanning Speed
0.006 Degree ~120 Degree/Min
Spezifikation
ISO9001: 2008
Herkunft
Dan Dong City, Liao Ning Province, China
Produktbeschreibung
XRD may be installed many kinds of special accessories and the corresponding control and the application software according to the actual needs to be the special function diffractometer system.
1. Long life and low frequency failure.
2. The sample can be for liquid, solid and powder etc.
3. TD series X-ray diffractometer is unique in China use PLC
TBM-8 Measuring accessory of parallel light film (Options)
It applies X-ray diffraction to study the thin film by evaporation precipitated on glass substrate, monocrystalline silicon substrate, metal polymer or the like. The film accessory is installed on the wide-angle goniometer. The θ-axis is fixed at a lower angle and make the X-ray incident from the low angle and 2θ auto scan. Then removing the X-ray from the matrix by using a flat crystal monochromator and can efficiently detect thin film diffraction lines. It usually measured the samples of the larger d values.
TZG-5Multifunction Integrated Measurement Accessories (Options)
In the past, most of the wide-angle goniometer attachment is designed for powder samples, but in recent years, X-ray diffraction analysis are increasingly being used for timber analysis, bulk analysis and the membrane analysis on the substrate, The integrated measurement attachment is designed for installing the aboving samples easily, and the phase detection test, orientation test, stress test and so on, the multi-purpose test. Installing the accessory in the wide-angle goniometer can carry out the texture test, stress test and the test of the structure in the film plane. There are corresponding application software for each function.
Applied Field:
1. The evaluation for the rolling board and metal set system.
2. The evaluation for the orientation of ceramics.
3. The evaluation for the orientation of the macromolecular compounds.
4. The evaluation for the preferred orientation of the crystal of the film sample.
5. The test for the residual stress of all kinds of metallic materials and ceramic materials.
6. The test for the residual stress of multi-layer membrane.
7. The analysis for the oxide film and the nitride film on the face of the film of the high-temperature superconducting materials and the metal plate and so on.
8. The analysis for the multi-layer membrane on the substrate of the glass, silicon and metal.
9. The analysis for the plating material like macromolecular material, paper and lens and so on.
TSM-2Graphite Curved Crystal Monochromator (Options)
Using the graphite curved crystal monochromator can improve peak to background ratio and reduce background and improve the resolution of the weak peak, reflection efficiency≥ 35% and it can drop the diffraction angle of the diffractometer.
TGW-1High-temperature Attachment (Options)
Installing the attachment in the wide-angle monometer can change the temperature of the environment and in order to understand the change of the crystal structures of the sample in the high temperature environment or the change of the mutual solubility of various substances.
TXT-9 Small Angle Diffraction (Options)
Deploying the corresponding accessories can carry out small-angle diffraction, Angle ranges from 0 degree to 5 degree. It can test the thickness of nano-multilayer films.
TXZ-7 Rotating Sample Stage (Options)
It can eliminate the factor of the differences in sample preparation. And it ensures the good reproducibility of diffraction intensity. The use of movingθaxis can be crystal orientation.
TZY-12 instrument of producing sample
It is used for the production of powder samples. The uniformity of the sample is good.
TXZ-10 instrument of swapping sample
It is droved by the imported stepper motor and controlled by the imported programmable controller. It doesn't need people to swap the sample. The sample is tested by the system automatically and continuously. And the data is kept by the system automatically.
TD-Series X-ray diffractometers are mainly used in the analysis of power, massive or film samples with their qualitative/quantitative attributes, crystal structure, material structure, crystal orientation, micro and macro stress, size of crystal and crystallinity. |
Name | Major Technical Parameters | Characters |
X-ray Generator (Imported PLC Technology) | Voltage(Single-phase) | AC 220V±10% | As taking the imported PLC technology, so it has the characters of high automation, low faulty rate, high resistance to noisy factors, high stability and long life for the whole system. PLC working with PC controls the on/off of the shutter and the current and voltage and self-trains the X tube. |
Rated power | 5KW |
Tube voltage | 10~60kV1kV /Step |
Tube current | 2~80mA,1mA /Step |
Stability | ≤0.005% |
High-pressure cable | Dielectric voltage: 100V, length: 2m. |
Goniometer | Structure | TD-2500(Horizontal) TD-3000(Vertical) TD-3500(Keep sample still) | Vertical sample,θ-2θ Horizontal sample,θ-2θ Horizontal sample,θS-θd |
Scanning radius | 185mm | The system of angle measurement takes the imported high-accuracy bearing transmission, upgrading the accuracy of the measurement to samples and extending the life of the instrument. The instrument also takes two types of optical system: the focusing one and the parallel one, both with the function of dynamic adjustment. The instrument takes the θ/2θ driving or θ-2θ working together, with continuous or step-in scanning. |
Range of scanning (2θ) | -35~170°, |
Speed of scanning | 0.006~120°/min |
Repeating accuracy (2θ) | ≤0.0005° |
Min step-in angle | 0.0001° |
Accuracy | ≤0.001° |
Filter | Ni(for Cu target) |
Turning speed | 1500°/min |
Slit system | Auto adjustable slit system |
Recording Control Unit | counter | PC/SC(proportional/ Scintillation) | Recording control system, based on the technology of Panalytical diffractometer from Netherlands, applies the human–computer interface with touch screen and the advanced PLC controlling technology. The circuit of the system using the concept of modeling design greatly improves system's resistance to noisy signals, so the system achieves better stability. |
Linear range of counter | ≥10,000,000cps |
Max background noisy | ≤1cps |
High-pressure of the counter | 0~2100V adjustable |
Way of counting | In differential way and in integral way |
Stability in high voltage of detector | Better than±0.005% |
Resolution of spectroscopy | sc:≤50% pc:≤20% |
Recycled Refrigeration System | structure | Split-type or all-in-one | The recycled refrigeration system automatically controls the water temperature and displays the temperature of the X tube, with dynamically choosing the variety of temperature. As the instrument has its own recycled refrigeration system and stainless steel pumps, so there is no need for external cooling system and it reduces the noise and avoids watermarks, which always block the X-ray tube. |
Operating temperature | 0-50°C |
Operating voltage | 220V |
Precaution | Detecting flow pressure Detecting refrigerant pressure Protection of over-high/under-low temperature |
PC | Host | Dual core CPU/RAM2G/HD500G | Brand PC |
Monitor | 21″LCD |
Printer | Laser |
Protections | Warning settings | Warnings for: over-high KV\mA, under-low KV\mA, run out of water, high-temperature of x tube, over current of whole equipment, power warning for x tube etc. | 5 scales of power protection: 0.8\1.2\1.8\2.2\2.7 |
Security settings | Double protected system/ shutter window and lead door working together/shutter window will be closed automatically while lead door opens | |
Leakage of x-ray | Inspection based on <GBZ115-2002 Hygiene Protection Standards of x-ray Diffraction and Fluorescence Analyzer >. Radiation Safety Permit No.: [00150] Rays measurement outside the shield:≤0.1μSv/h | Applying the high-density and high-transparent lead glass for the protection. |
Software | Controlling software | 1.Chinese interface on Windows platform with functions of controlling the voltage and current in x-ray generator and aging training of the shutter and x tube 2. Automatically controlling the diffractometer to scan the sample in steps way or in continuous way while sampling; automatically making the goniometer step forward/backward and adjusting the goniometer to 2θ | |
Application | 1. Smooth, fit/remove background, peel off Kα 2 2. Searching peaks (marking peaks: value of D, 2θstrength, width of half-height, value of 2θand displaying all parameters ) 3. Change stepsize of sampling, removing noisy peaks; adjusting value of d and positions of peaks 4. Calculat integral area, integral width, width of half-height, comparison of patterns, integration of patterns. 5. Add text in patterns; two cursors: small cursor and big cursor. 6. Variety of zooming, variety of coordinates: linear, logarithm, square root 7. Put pictures in clipboard or paste into word/excel 8. Program for recognizing peaks, calculation of crystallinity, refining the parameters of crystal cell, standardization; quantitative analysis of clay | Details in : "Data Processing" in "TD Seriess of X-ray Diffractometer" |
Curved Graphite Crystal Monochromator (optional) | Reflection | η more than 30% | Applying this optional to the instrument will upgrade the comparison of different peaks and greatly recognize the weak peaks and reduce the diffraction angle of the diffractometer. |
Gradient of crystal surface | ±2 ° |
Mosaic degrees | less than 0.55 |
Target material | Cu |
China-made X-ray Tube | Power | 2kW | |
Focus | 1×10mm |
Target | One Cu target |
Die Anschrift:
No. 70-29 Wen Qing Road, Xin Cheng District, Dandong, Liaoning, China
Unternehmensart:
Hersteller/Werk
Geschäftsbereich:
Messinstrumente
Firmenvorstellung:
Dan Dong Tong Da Science and Technology Co., Ltd ist ein professioneller Hersteller von Röntgengeräten aller Art. Unsere wichtigsten Produkte sind Röntgendiffraktometer, tragbare Röntgenfehler Detektor, Röntgenkristall-Analysator und so weiter. Unser Unternehmen wurde 2010 gegründet, in der Nähe des Yalu River gelegen, genießen wir bequeme Wasser-, Land- und Lufttransport.
Unser Unternehmen beschäftigt mehr als 50 Mitarbeiter; durch die harte Arbeit sind wir zu einem großen Röntgenhersteller geworden. Wir werden kontinuierlich versucht, die Produktqualität zu verbessern,
Jetzt Dandong Tongda Science andTechnology Co., Ltd ist bereits nach Aserbaidschan, Irak und anderen Ländern und Regionen exportiert. Unser Unternehmen konzentriert sich auf Forschung, Entwicklung und Innovation, und vor kurzem entwickelt neue Mini-Röntgendiffraktometer und Einzel-Röntgendiffraktometer, wir haben ISO9001 Zertifizierung.
Unser Unternehmen betrachtet angemessene Preise, effiziente Produktionszeit und guten After-Sales-Service als unser Grundsatz. Wir hoffen, mit mehr Kunden für die gemeinsame Entwicklung und Nutzen zu kooperieren. Wir begrüßen potenzielle Käufer, um uns zu kontaktieren.