Grundlegende Informationen.
Power Supply Voltage(Kv)
0.4kv(± 10%)
Power Supply Frequency (Hz)
45~55Hz
Power Supply Mode
Three-Phase Three Wire or Three-Phase Four Wire
Harmonic Compensation Order
2~25
Output Current(a)
25~750A
Protection Mode
Overcurrent, Overheat, Open-Phase, Erro-Phase
Switching Frequency
20KHz
Communication
RS485/RS232
Spezifikation
CE, SGS ISO9001, ISO14001, OHSMS18001
Herkunft
Guangdong, China (Mainland)
Produktbeschreibung
2015 Wanlida 400V active power filterPrinciple
Due to the application of non-linear loads in recent years, it brings serious negative influence to quality of power supply because of their non-linear, impact and unbalanced characteristics. Before the application of power electronic components, the main harmonic sources are transformer excitation currents, and then are generators, but after large scale application of power electronic components, the power electronic devices are main harmonic sources such as arc furnace, electrified railway, frequency inverters, rectifiers, UPS, computers, fluorescent lamp and household appliance etc,
Conventional passive filters are mainly applied for harmonic restrain and reactive power compensation due to its advantages of less cost, simple structure, but passive filters have large dimension, and their compensation performances are affected easily by system impedance and its operation state, it is easy for passive filters to generate resonance with system, therefore it is not enough to manage harmonic only by using passive filters, we must use more advanced and smart power electronic device-Active power filter(APF) for integrated power quality management in power distribution system.
APF Technical Principle
Active power filter (APF/AHF) is new power electronic equipment which can dynamically filter harmonic with variable amplitude and frequency and compensate reactive power, it overcome the shortages of conventional LC filter and obtained the better compensation performances than passive filter.
The right diagram is schematic diagram of active power filter (APF/AHF), where, Vs is AC power supply, nonlinear load is harmonic source, it generates harmonic and consumes reactive power. APF system is composed of instruction current operational circuit and compensation current generation circuit, the instruction current operational circuit is mainly to detect current components in harmonic current and reactive power of compensation object, and the compensation current generation circuit generates equivalent compensation current with same amplitude and inverse polarity with harmonic current to filter harmonics according to instruction signal, the main circuit adopts PWM converter.
APF Functions
Reduce harmonic distortion
Improve power factor
Reduce line loss
Prevent neutral line from overheat
Prevent power equipments from noise, overheat and vibration like motor, transformer etc.
Prevent signal transmission equipments from data loss and interference
Prevent measurement error caused by non-sinusoidal current and voltage.
Prevent sensitive semi-conductive device from damage
Prevent circuit breaker trip.
Prevent capacitors from burn due to harmonic resonance
Ensure safety of power system and reduce energy consumption
APF Technical Features
Can filter all kinds of harmonic currents
Filtering capability >95% for aimed harmonic
Traction level IGBT module, 20KHz switching frequency
Response time <10ms
Single capacity up to 300A
Suppress three-phase unbalance
Conform to IEEE Std. 519-1992, GB/T 14549
Can be used as harmonic source
Apply closed-loop control, and ensure filtering accuracy
Can set filtering mode and select harmonic filtering type
Adapt automatically to impedance change of power network
Can connect 690V system(CE/C-tick) and 600V system(cUL) directly
Parallel connection, easy for filtering capacity expansion
Modularized design, easy for maintenance
Perfect protection functions
Faults record and history inquire
Support multiple communication protocols
Technical Parameters
SN | Parameters | Value |
1 | Power Supply Voltage(kV) | 0.4/0.69kV (±15%) |
2 | Power Supply Frequency (Hz) | 50/60Hz |
3 | Power Supply Mode | Three-phase three wires or three-phase four wires |
4 | Harmonic Compensation Components | 2~50 |
5 | Response Time (ms) | <=10ms |
6 | Output Current(A) | 25~750A |
7 | Protection Mode | Over current, overheat, phase loss, Error-phase, DC busbar over/under voltage, Current limit for overload etc |
8 | Loss | <5% |
9 | Operation Display | Touch screen |
10 | Operation Environment | -100C~+450C |
11 | Altitude | <1000m |
12 | Relative Humidity | <90% (250C) |
13 | Noise | <70Db |
14 | Compensation capability | All within compensation capacity |
15 | Compensation Mode | Harmonic compensation, reactive power compensation or Both |
16 | Switching Frequency | 20kHz |
17 | Cooling Mode | Forced air cooling |
18 | IP | IP20 |
19 | Color | RAL7032 |
20 | Feed Direction | Top/Bottom |
21 | Communication | RS485/RS232 |
Factory Acceptance Testing
We built the first-class high voltage and big capacity power electronic equipments test platform to realize Factory Acceptance Testing for whole machine before delivery.
Die Anschrift:
Room 602, No. 117, Cu Sha Huan Lu, Hengqin, Zhuhai, Guangdong, China
Unternehmensart:
Hersteller/Werk, Handelsunternehmen
Geschäftsbereich:
Elektronik, Industrielle Anlagen und Zusatzteile, Mineralien und Energie, Sicherheit und Schutz
Zertifizierung des Managementsystems:
ISO 9001, ISO 14001, OHSAS/ OHSMS 18001
Firmenvorstellung:
Zhuhai Pacan Electric Co., Ltd ist ein professioneller One-Stop-Lösung Lieferant für Motorantriebe und Leistungsqualität Korrektur Ausrüstung; Wir liefern vor allem Mittelspannung und Niederspannung variabler Frequenz Antrieb, Mine verwenden flammgeschützte und eigensichere Antriebe, Mittelspannung magnetisch gesteuerten Reaktor typed Soft Starter, Mittelspannung und Niederspannung statischer synchroner Kompensator (STATCOM), aktiver Oberwellenfilter usw. mit jahrelanger Exporterfahrung haben wir Kooperationspartner in Bangladesch, Pakistan, Vietnam, Iran, Türkei, Polen, Russland, Mongolei, etc. Unsere Produkte decken bis heute rund 20 Länder und Regionen von Südostasien und Osteuropa bis zum Nahen Osten und Afrika ab.
Paconon Electric wird dem Prinzip „Customer First“ folgen, sich auf den technischen Support vor dem Verkauf und nach dem Verkauf konzentrieren, weiterhin keine Anstrengungen scheuen, um unseren Kunden zu helfen, die Produktionseffizienz zu verbessern, den Energieverbrauch zu sparen und ihre soziale Verantwortung zu erfüllen.